SHOEMAKING
CHAPTER ONE
FUNDAMENTAL SHOE TERMS
Before explaining the manufacture of shoes, it is necessary to fix definitely in our minds the names of their different parts. Examine your shoes and note the parts that are here described.
The bottom of the shoe is called the sole. The part above the sole is called the upper. The top of the shoe is that part measured by the lacing which covers the ankle and the instep. The vamp is that section which covers the sides of the foot and the toes. The shank is that part of the sole of the shoe between the heel and the ball. This name is often applied to a piece of metal or other substance in that part of the sole, intended to give support to the arch of the foot. The throat of the vamp is that part which curves around the lower edge of the top, where the lacing starts.
Backstay is a term used to denote a strip of leather covering and strengthening the back seam of the shoe. Quarter is a term used mostly in low shoes to denote the rear part of the upper when a full vamp is not used. Button fly is the portion of the upper containing the buttonholes of a button shoe. Tip is the toe piece of a shoe, stitched to the vamp and outside of it. The lace stay is a term used to denote a strip of leather reënforcing the eyelet holes. Tongue denotes a narrow strip of leather used on all lace shoes to protect the instep from the lacing and weather.
Names of the Different Parts of Foot Wear. [Page 2.]
Foxing is the name applied to leather of the upper that extends from the sole to the laces in front, and to about the height of the counter in the back, being the length of the upper. It may be in one or more pieces, and is often cut down to the shank in circular form. If in two pieces, that part covering the counter is called a heel fox. Overlay is a term applied to leather attached to the upper part of the vamp of a slipper. The breast of the heel is the inner part of the heel, that is, the section nearest the shank.