The same is true in America. Lawrence became a large worsted center on account of the great fall of water and the use of the river to deposit wool washings. Lowell, Fall River, and New Bedford became large cotton centers for similar reasons.
History of Manufacturing
SPINNING WHORL
One of the earliest devices used for spinning
Spinning. Spinning and weaving are two of the earliest arts practised by man. Yarn for the making of cloth was spun in the earliest times by the use of the distaff and spindle. The spindle was a round stick of wood a foot or less in length, tapering at each end. A ring of stone or clay was placed on the spindle to give it steadiness and momentum when it revolved. At the top of the spindle was a slit or notch in which the yarn was caught. The distaff was a larger, stouter stick, around one end of which the material to be spun was wound in a loose ball. The spinner fixed the end of the distaff under her left arm so that the coil of material was in a convenient position for drawing out to form the yarn. The end of the yarn, after being prepared, was inserted in the notch, and the spindle was set in motion by rolling it with the right hand against the leg. Then the spinner drew from the distaff an additional amount of fiber, which was formed by the right hand into uniform strands. After the yarn was twisted, it was released from the notch and wound around the lower part of the spindle.
In order to spin yarn by the primitive spinner, it was necessary for the fiber to have sufficient length to enable it to be manipulated, drawn over, and twisted by the fingers. It is noted that the yarns for the gossamer-like Dacca muslins of India were so fine that one pound of cotton was spun into a thread 253 miles long. This was accomplished with the aid of a bamboo spindle not much bigger than a darning needle, which was lightly weighted with a pellet of clay. Since such a slender thread could not support even the weight of so slight a spindle, the apparatus was rotated upon a piece of hollow shell. It thus appears that the primitive spinners with distaff and spindle had nothing to learn in point of fineness from even the most advanced methods of spinning by machinery.
HAND SPINNING
From a Fourteenth Century MS. in the British Museum
Certain rude forms of the spinning wheel seem to have been known from time immemorial. The use of the wheel in Europe cannot, however, be dated back earlier than the fifteenth century. In the primitive wheel the spindle, having a groove worked in its whorl, was mounted horizontally in a framework fixed to the end of a bench. A band passed around the whorl and was carried around a large wheel fixed farther back on the bench, and this wheel, being turned by the hand of the spinner, gave a rapid rotation to the spindle.
