This weave is used in the production of sheeting, muslin, lawn, gingham, broadcloth, taffeta, etc. In plain weaving it is possible to produce stripes by the use of bands of colored warp, and checks where both warp and weft are parti-colored. This weave is commonly used when the cloth is intended to be ornamented with printed patterns. In weaving cloth of only one color but one shuttle is used, while for the production of checks, plaids, etc., two or more shuttles are required.
GIRL DRAWING EACH THREAD OF WARP THROUGH THE REED AND HARNESS READY TO BE PLACED ON LOOM
A, warp beam. B, warp. C, harness frame
Twill Weave. A twill weave has diagonal lines across the cloth. In this class of weaves the filling yarn or threads pass over 1 and under 2, or over 1 and under 3, 4, 5, or 6, or over 2 or 3 and under 1, 2, 3, or 4, or over 4 and under 4, 3, 6, etc. Each filling thread does not pass under and over the same set of warp threads, as this would not give the desired interlacings. Instead the order of interlacing moves one thread to the right or left with each filling thread that is woven. If there are the same number of threads to an inch in warp and filling, twill lines will form an angle of 45 degrees; if the warps are closer together than the filling, the angle will be steeper; if the filling threads are closer together the lines will approach more nearly the horizontal. Different effects are obtained in patterns by variation in the sizes of the yarn and twist, by the use of heavy threads to form cords, ribs, etc., and by the mixture of vari-colored materials in the yarn. Often one form of twill-weave is combined with another to produce a fancy twill-weave. The object of the twill-weaving is to increase the bulk and strength of a fabric, or to ornament it. The disposition of the threads permits the introduction of more material into the cloth, and hence renders it heavier, and of closer construction than in the case of plain-weaving.
Satin Weaves. The object of a satin weave is to distribute the interlacings of the warp and filling in such a manner that no trace of the diagonal (twill) line will be seen on the face of the cloth. In weaving a satin design the filling thread is made to pass under 1 and over 4, 7, 9, 11, or more if a larger plush satin is required. The raising of the warp end to allow the filling to pass under is done in such a way as to prevent twill lines from showing in the cloth. The result is that practically all of the filling is on the face of the cloth. This is called a filling-face satin weave. A warp-face satin weave may be produced by reversing the order; in this case practically all of the warp is brought to the face of the cloth. In this way a worsted warp and a cotton filling might be woven so that practically all of the warp would show on the cloth, and give it the appearance of a worsted fabric. A number of classes of silk goods are made in this way, with a silk filling covering a cotton warp.
This weave produces an even, close, smooth surface, capable of reflecting the light to the best advantage, and having a lustrous appearance which makes it resemble satin cloth. Satin cloth is made of silk using a satin weave.
Satin weaves are used very largely in producing different styles of cotton and silk fabrics, and are also frequently found in woolen goods. They are more extensively used in the manufacture of damask and table-covers than for any other class of goods. Satin stripes are frequent in madras, shirtings, and fancy dress goods in connection with plain and figured weaves.
Figure Weaving. To produce complicated and irregular patterns in the loom a large number of different openings (sheds) must be made in the warp, and to secure such a large number an attachment is placed on top of the loom called a Jacquard apparatus. The Jacquard is merely an apparatus for automatically selecting warp threads, by which each separate one can be made to move independently of any of the others. It is provided with weighted strings attached to each of the warp threads. The weighted strings are controlled by wire needles which are in turn controlled by perforated cards. Each motion of the loom changes their position and allows some needles to go through the holes in the cards, thus drawing up the warp, while others strike the card and leave the warp down. In this way the perforations of the cards determine the figure of the patterns. The Jacquard is chiefly used to produce patterns of great width in which all or most of the threads in the pattern move independently. For the weaving of elaborate effects and flowing lines it is practically indispensable. All elaborate designs are classed under the name of Jacquards.
Double Cloth. Double cloth is a descriptive term applied in weaving to fabrics produced by combining two single cloths into one. Each one of these single cloths is constructed with its own systems of warp and filling, the combination being effected in the loom by interlacing some of the warp or filling threads of one cloth into the other cloth at certain intervals, thus fastening them securely together. The reasons for making double-cloths are many. Sometimes it is done to reduce the cost of heavy weight fabrics by using cheaper materials for the cloth forming the back; again it may be to produce double-face fabric; it allows great freedom for the formation of colored patterns which may or may not correspond in pattern on both sides; it is the basis of tubular weaving such as is practised for making pillow cases, pockets, seamless grain bags, etc.; more frequently, the object is to increase the bulk or strength of certain kinds of fabrics, such as heavy overcoatings, cloakings, pile-fabrics, golf-cloth, rich silk, etc.
Pile Weave. A pile weave is a general term under which are classed numerous varieties of cloth woven with a pile surface, as plush, velvet, velveteen, and carpeting of various kinds. Turkish towels are an excellent illustration of pile weaving. A pile surface is a closely set, elastic face covering various kinds of woolen, silk, and cotton fabrics, and consists of threads standing close together, either in the form of loops or as erect thread-ends sheared off smooth so as to form a uniform and even surface. In the production of a pile fabric a third thread is introduced into the weaving and formed into loops usually by carrying it over the wires laid across the breadth of the cloth. The wires are afterward drawn out, leaving the loops standing; the loops may then be cut so as to form a cut pile, as in velvet and plush, or they may be left in their original form as in Brussels carpet and Turkish towels.