"In making a belt no particular pattern was followed; sometimes they are of the width of three fingers and three feet long, in other instances as wide as the hand and over three feet in length; sometimes they are all of one color, in others variegated, and in still others woven with the figures of men to symbolize, by their attitudes, the objects or events they were designed to commemorate. The most common width was three fingers, or the width of seven beads, the length ranging from two to six feet. In belt making, which is a simple process, eight strands or cords of bark thread are first twisted, from filaments of slippery elm, of the requisite length and size; after which they are passed through a strip of deer-skin to separate them at equal distances from each other in parallel lines. A piece of splint is then sprung in the form of a bow, to which each end of the several strings is secured, and by which all of them are held in tension, like warp threads in a weaving machine. Seven beads, these making the intended width of the belt, are then run upon a thread by means of a needle, and are passed under the cords at right angles, so as to bring one bead lengthwise between each cord and the one next in position. The thread is then passed back again along the upper side of the cords and again through each of the beads; so that each bead is held firmly in its place by means of two threads, one passing under and one above the cords. This process is continued until the belt reaches its intended length, when the ends of the cords are tied, the end of the belt covered and afterward trimmed with ribbons. In ancient times both the cords and the thread were of sinew."[113]
In another place Mr. Morgan states that belts were also made by covering one side of a deer-skin belt with beads, probably by sewing them on;[114] a method which is everywhere common in the use of glass beads in modern work, but is not noticed in any of the mnemonic belts now extant. It is a remarkable as well as a lamentable fact that none of the great collections of the country can boast the possession of a wampum belt. Considering their importance in our early history, and the great numbers that at one time must have been in existence, this is rather extraordinary. I have taken considerable pains to collect accurate representations of a number of examples of the ancient belts for this work, and am only sorry that I am unable to present them in color—the only method by which they can be adequately shown. As those which have come to my notice represent but a few localities, I shall insert descriptions of a number from regions as remote as possible. There is, however, great uniformity in design and method of construction; the result, probably, of their international character. From Heckewelder I quote the following:
"Their belts of wampum are of different dimensions, both as to the length and breadth. White and black wampum are the kinds they use; the former denoting that which is good, as peace, friendship, good-will, &c.; the latter the reverse; yet occasionally the black also is made use of on peace errands, when the white cannot be procured; but previous to its being produced for such purpose, it must be daubed all over with chalk, white clay, or anything which changes the color from black to white. * * * A black belt with the mark of a hatchet made on it with red paint is a war belt, which, when sent to a nation, together with a twist or roll of tobacco, is an invitation to join in a war. * * * Roads from one friendly nation to another are generally marked on the belt by one or two rows of white wampum interwoven in the black, and running through the middle, and from end to end. It means that they are on good terms, and keep up a friendly intercourse with each other."[115]
A belt accepted by the Indians of Western Pennsylvania from the French in a treaty which secured to the latter four forts within English territory had embroidered upon it four houses, pictographic representations of the forts.
Another example of the belts used in Pennsylvania, upwards of a century ago, is described in Beatty's Journal. The Delawares, in explaining to Beatty a former treaty with Sir William Johnson, "showed a large belt of wampum of friendship which Sir William Johnson had given them. On each edge of this were several rows of black wampum, and in the middle were several rows of white wampum. In the middle of the belt was a figure of a diamond, in white wampum, which they called the council fire. The white streak they called the path from him to them and them to him."[116]
Loskiel states that "the Indian women are very dexterous in weaving the strings of wampom into belts, and marking them with different figures, perfectly agreeing with the different subjects contained in the speech. These figures are marked with white wampom upon black, and with black upon the white belts. For example, in a belt of peace, they very dexterously represent, in black wampom, two hands joined. The belt of peace is white, a fathom long and a hand's breadth."[117]
In Plate XXXVII I present a fac-simile reproduction of a plate from the well known work of Lafitau,[118] in which we have a graphic yet highly conventional representation of a council or treaty in which wampum belts were used. It is probably drawn from description and is far from truthful in detail. The more important facts are, however, very clearly presented. No information is given either of the people or the locality. The scene is laid in the middle of a broad featureless plain, the monotony of which is broken by three highly conventionalized trees. The parties to the treaty are ranged in two rows, placed, face to face. The chief who speaks stands at the farther end holding a belt in his right hand. Three other belts lie upon the mat at his feet, while a fifth is shown on a large scale in the foreground. The patterns can not be clearly made out, but in a general way resemble very closely the designs woven into the belts of the Iroquois.
PL. XXXVII—USE OF WAMPUM BELTS IN INDIAN COUNCIL.
Facsimile of a plate in Lafitau.