Another good bed.Seam No. 1 is only partially exposed, the workings having caved in; but enough of the seam was visible to show that it was a bright, soft, friable, bituminous coal, of good quality, containing some slate and nigger-head. Its fracture would be called dicey by some geologists, because it breaks readily into small cubes, even smaller than dice. The seam is probably about five feet in thickness.
Geological relations.This group probably corresponds geologically with the Kirke Mines, on Green River; but, judging by the eye, it is a more bituminous coal and better suited to coking. The large bed here may correspond with one of the large beds at the Kirke Mines.
I fear that faults are numerous in the coal rocks of this group, which, of course, would add to the expense of mining. But if, as expected, it furnishes a good smelting coke, the field will be extremely valuable from its contiguity to the magnetic ores of the Cascade Mountains and the scarcity of coking coals.
This property was for sale when I visited it, and would have been sold but for a claim of ownership set up by the Northern Pacific Railroad, which, however, in the opinion of good lawyers, had no foundation.
This the bottom group.This is the bottom group of the Washington Territory coal field. It will be seen that, taking the Gilman group, the Raging River group, and the Snoqualmie group on one line, and the Cedar River, Carbon River, and Green River group on another line, it may be fairly claimed that there are at least fifteen working seams of three feet and upward in the Washington Territory coal field.
e. The Yakima and Wenatchie Group. This field lies on the east flank of the Cascade Mountains, on the waters of the Yakima and its tributaries, Cle-ellum and Teanaway. It is believed to extend also into the Wenatchie Valley, although the area here is probably disconnected from the Yakima area. I purposely refrained from visiting this region, and for my statements I am indebted chiefly to Bailey Willis, F. H. Whitworth, Charles Burch, and Mr. Jamieson of the Kirke Mines.
Yakima or Roslyn coal field.The Yakima area lies north of the Yakima River, near to the Northern Pacific Railroad, and to the projected line of the Seattle, Lake Shore and Eastern Railway, and extends about sixty miles east and west, and six miles north and south. Its dip is gentle, say twelve to twenty degrees. It holds three coal seams of 2 feet 6 inches, and 5 feet and 5 feet respectively. There is not much evidence of fracture in any part of the field. The total thickness of the coal-bearing rocks is estimated by Bailey Willis to be 1,000 feet. This is evidently the lower part of the coal series, the upper part having been carried away. The best seam is mined at Roslyn, four miles north of the Northern Pacific Railroad, in the interest of that railroad.
The seam here furnishes upward of four feet of good coal. The coal is bituminous, dull black, firm, and free burning. Mr. Jamieson thinks it will not make good coke. Others, however, think that it will, and these are supported partially by the laboratory test in Washington City, D. C. (See Table of Coal Analyses, [page 107].) It is called in the table Roslyn coal.
This coal is used chiefly in the locomotives; but the popular demand for it is very great in the plateau country of East Washington.