Common Minerals and Rocks

by William O. Crosby

Veins occur chiefly in old, metamorphic, and highly disturbed formations, where there is abundant evidence of the former existence of profound fissures, and in regions similar to those in which thermal springs occur to-day.

In the supplement to the lithological section the student will find the formation of a typical vein briefly described and contrasted with that of a typical dike; also a brief account of the lithological peculiarities of vein rocks, and general statements concerning their relative abundance and vast economic importance.

External Characteristics of Veins.—The typical vein may be described as a fissure of indefinite length and depth, filled with mineral substances deposited from solution. Externally, it is very similar to the typical dike, for the fissures are made in the same way for both. Veins are normally highly inclined to the horizon; they exhibit in nearly every respect the same general relations to the structure of the country rock as dikes; and the ages of veins are determined in the same way as the ages of dikes.

The extensive mining operations to which veins have been subjected in all parts of the world, have made our knowledge of their forms below the surface very full and accurate. It has been learned in this way that very often the corresponding portions of the walls of a vein do not coincide in position, but one side is higher or lower than the other, showing that the walls slipped over each other when the fissure was formed or subsequently; and this faulting or displacement of the walls appears to be much more common with veins than with dikes, perhaps because the fissures remained open much longer. This slipping of the walls is the principal cause of the almost constant changes in the width of veins. For, since the walls are never true planes, and are often highly irregular any unequal movements must bring them nearer together at some points than at others. As a rule, the enormous friction accompanying the faulting, either crushes the wall-rock, or polishes and striates it, producing the highly characteristic surfaces known as slicken-sides. Where the wall is finely pulverized in this way, or is partially decomposed before or after the filling of the fissure, a thin layer of soft, argillaceous material is formed, separating the vein proper from the wall-rock. The miners call this the selvage; and it is a very characteristic feature of the true fissure veins.

Fragments of the wall-rock are frequently enclosed in veins, and the latter sometimes branch or divide in such a way as to surround a large mass of the wall, which is known as a “horse.” A similar result is accomplished when a fissure is re-opened after being filled, if the new fissure does not coincide exactly with the old. It has been proved that veins have thus been re-opened and filled several times in succession; and in this way fragments of the older vein material become enclosed in the newer.

Although usually determined in direction by the joint-structure of the country rock, veins are often parallel with the bedding, especially in highly inclined, schistose formations. Such interbedded veins are commonly distinctly lenticular in form, occupying rifts in the strata which thin out in all directions and are often very limited in extent.

Whether conforming with the joint-structure or bedding, veins are commonly arranged in systems by their parallelism, those of different systems or directions usually differing in age and composition, and the older veins being generally faulted or displaced when intersected by the newer.

Internal Characteristics of Veins.—Internally, veins and dikes are strongly contrasted; and it is upon the internal features, chiefly, as previously explained, that we must depend for their distinction. In metalliferous veins the minerals containing the metal sought for (the galenite, sphalerite, etc.) are the ore; while the non-metalliferous minerals (the quartz, feldspar, calcite, etc.) are called the gangue or vein-stone proper. Although the combinations of minerals in veins are almost endless, yet certain associations of ores with each other and with different gangue minerals are tolerably constant, and constitute an important subject for the student of metallurgy and mining.

When a vein is composed of a single mineral, as quartz, it may rival a dike in its homogeneity. Most important veins, however, are composed of several or a large number of minerals, which may be sometimes more or less uniformly mixed with each other, but are usually distributed in the fissure in a very irregular manner. The great granite veins which are worked for mica, feldspar and quartz, are good illustrations, on a large scale, of the structure of veins in which several minerals have been deposited cotemporaneously. The individual minerals are found to a large extent, in great, irregular masses, with no order observable in their arrangement.

When a mineral is deposited from solution, it crystallizes by preference on a surface of similar composition, thus quartz on quartz, feldspar on feldspar, and so on; and it seems probable that this selective action of the wall-rock may be a principal cause of the irregular distribution of minerals in veins. It has often been observed in metalliferous veins that the richness varies with the nature of the adjacent country rock. This dependence of the contents of a fissure upon the wall-rock may be due in part to the selective deposition of the minerals, and in part to their derivation from the contiguous portions of the country or wall-rock, as in the so-called segregated veins. Temperature and pressure exert an important influence upon chemical precipitation, and it is, therefore, probable that the composition of many veins varies with the depth.