54. When only a small roast is wanted, a single rib, such as is shown in Fig. 19, is often used. In a roast of this kind, the bone is not removed, but, as will be observed, is sawed in half. Such a roast is called a standing rib roast. Another small roast, called a porterhouse roast, is illustrated in Fig. 20. This is obtained by cutting a porterhouse steak rather thick. It is therefore a very tender and delicious, although somewhat expensive, roast. Other parts of the loin may also be cut for roasts, the portion from which sirloin steaks are cut making large and very delicious roasts.
55. RUMP ROASTS.--Between the loin and the bottom round lies the rump, and from this may be cut roasts of different kinds. The entire rump with its cut surface next to the round is shown in Fig. 21, and the various pieces into which the rump may be cut are illustrated in Figs. 22 to 25. These roasts have a very good flavor and are very juicy, and if beef in prime condition can be obtained, they are extremely tender. Besides these advantages, rump roasts are economical, so they are much favored. To prepare them for cooking, the butcher generally removes the bone and rolls them in the manner shown in Fig. 26.
56. ROAST BEEF.--The usual method of preparing the roasts that have just been described, particularly the tender ones, is to cook them in the oven. For this purpose a roasting pan, such as the one previously described and illustrated, produces the best results, but if one of these cannot be obtained, a dripping pan may be substituted. When the meat is first placed in the oven, the oven temperature should be 400 to 450 degrees Fahrenheit, but after the meat has cooked for about 15 minutes, the temperature should be lowered so that the meat will cook more slowly.
Before putting the roast in the oven, wipe it thoroughly with a damp cloth. If its surface is not well covered with a layer of fat, place several pieces of salt pork on it and tie or skewer them fast. Then, having one of the cut sides up so that it will be exposed to the heat of the oven, set the piece of meat in a roasting pan or the utensil that is to be substituted. Dredge, or sprinkle, the surface with flour, salt, and pepper, and place the pan in the oven, first making sure that the oven is sufficiently hot. Every 10 or 15 minutes baste the meat with the fat and the juice that cooks out of it; that is, spoon up this liquid and pour it over the meat in order to improve the flavor and to prevent the roast from becoming dry. If necessary, a little water may be added