Full particulars post free on application. All books are bound in cloth unless otherwise stated.
NOTE: The Prices in this Catalogue apply to books sold in the United Kingdom only.
AGRICULTURE.
Hemp. A Practical Treatise on the Culture of
Hemp for Seed and Fibre, with a Sketch of the
History and Nature of the Hemp Plant. By
S. S. Boyce. 13 illus. 112 pp. crown 8vo. (New
York, 1900) net
2
0
The Fertilisation of Tea. By G. A. Conie. With
17 illus. 68 pp. crown 8vo, sewed. (1908) net
2
6
Farm Drainage. By H. F. French. 100 illus. 284
pp. crown 8vo. (New York, 1904) net
4
6
Talks on Manures. By J. Harris. New edition,
366 pp. crown 8vo. (New York, 1893) net
6
6
Coffee, its Culture and Commerce in all Countries.
By C. G. W. Lock. 11 plates, 274 pp. crown 8vo.
(1888)
12
6
Sugar, a Handbook for Planters and Refiners.
By the late J. A. R. Newlands and B. E. R.
Newlands. 236 illus. 876 pp. demy 8vo. (London,
1909) net
1
5
0
Hops, their Cultivation, Commerce and Uses. By
P. L. Simmonds. 143 pp. crown 8vo. (1877)
4
6
Tropical Agriculture. By P. L. Simmonds. New
edition, 539 pp. 8vo. (1889)
1
1
0
The Future of Cocoa-Planting. By H. Hamel
Smith. With illustrations, 95 pp. crown 8vo,
sewed. (1908) net
1
0
Estate Fences, their Choice, Construction and
Cost. By A. Vernon. Re-issue, 150 illus.
420 pp. 8vo. (1909) net
8
6
ARCHITECTURE AND BUILDING.
The Hydropathic Establishment and its Baths.By R. O. Allsop. 8 plates, 107 pp. demy 8vo.(1891)
5
0
The Turkish Bath, its Design and Construction.By R. O. Allsop. 27 illus. 152 pp. demy 8vo.(1890)
6
0
The Builder’s Clerk. By T. Bales. Secondedition, 92 pp. fcap. 8vo. (1904)
1
6
Architectureand the Building Trades. By G. J. Burns.136 pp. crown 8vo. (1895)
3
6
Chimney Design and Theory. By W. W.Christie. Second edition, 54 illus. 200 pp.crown 8vo. (New York, 1902) net
12
6
Approximate Estimates. By T. E. Coleman.Third edition, 481 pp. oblong 32mo, leather.(1907) net
5
0
Stable Sanitation and Construction. By T. E.Coleman. 183 illus. 226 pp. crown 8vo. (1897)
6
0
Architectural Examples in Brick, Stone, Woodand Iron. By W. Fullerton. Third edition,245 plates, 254 pp. demy 4to. (1908) net
15
0
Bricklaying System. By F. B. Gilbreth. Fullyillustrated, 321 pp. 8vo. (New York, 1909) net
12
6
The Building Trades Pocket Book. Compiledby R. Hall. 12mo. With interchangeablediary net
1
6
Ditto ditto, in leather net
2
6
The Clerk of Works’ Vade Mecum. By G. G.Hoskins. Seventh edition, 52 pp. fcap. 8vo. (1901)
1
6
A Handbook of Formulæ, Tables, and Memoranda,for Architectural Surveyors and othersengaged in Building. By J. T. Hurst. Fifteenthedition, 512 pp. royal 32mo, roan. (1905) net
5
0
Quantity Surveying, for the Use of Surveyors,Architects, Engineers and Builders. By J.Leaning. Fifth edition, 936 pp. demy 8vo.(1904) net
1
5
0
Obstruction to Light. A Graphic Method ofdetermining Problems of Ancient Lights. ByH. B. Molesworth. 9 folding plates, 4to. (1902) net
6
0
Suburban Houses. A series of practical plans.By J. H. Pearson. 46 plates and 12 pp. text,crown 4to. (1905) net
7
6
Roman Architecture, Sculpture and Ornament.By G. B. Piranesi. 200 plates, reproduced infacsimile from the original. 2 vols. Imperial folio,in wrappers. (1900) net
2
2
0
The Seven Periods of English Architecture,defined and illustrated. By E. Sharpe. Thirdedition, 20 steel plates, royal 8vo. (1888)
12
6
Our Factories, Workshops and Warehouses,their Sanitary and Fire-Resisting Arrangements.By B. H. Thwaite. 183 illus. 282 pp. crown 8vo.
9
0
Elementary Principles of Carpentry. By T.Tredgold and J. T. Hurst. Eleventh edition,48 plates, 517 pp. crown 8vo. (1904)
12
6
Practical Stair Building and Handrailing. ByW. H. Wood. 32 plates, 91 pp. crown 4to.(1894)
10
6
Spons’ Architects’ and Builders’ Pocket Price-Book,Memoranda, Tables and Prices. Editedby Clyde Young. Revised by Stanford M.Brooks. Illustrated, 552 pp. 16mo, leather cloth(size 6½ in. by 3¾ in. by ½ in. thick). Issuedannually net
3
0
ARTILLERY.
Guns and Gun Making Material. By G. Ede.
Crown 8vo. (1889)
6
0
Treatise on Application of Wire to Construction
of Ordnance. By J. A. Longridge. 180 pp. 8vo.
1
5
0
The Progress of Artillery: Naval Guns. By J. A.
Longridge. 8vo, sewed. (1896)
2
0
The Field Gun of the Future. By J. A. Longridge.
8vo, sewed. (1892)
2
6
BRIDGES, ARCHES, ROOFS, AND STRUCTURAL DESIGN.
Strains in Ironwork. By Henry Adams. Fourthedition, 8 plates, 65 pp. crown 8vo. (1904)
5
0
The Practical Designing of Structural Ironwork.By Henry Adams. 13 plates, 194 pp. 8vo. (1894)
8
6
Designing Ironwork. By Henry Adams. Secondseries. 8vo, sewed.
Part I. A Steel Box Girder. (1894) net
0
9
Part II. Built-up Steel Stanchions. (1901) net
1
3
Part III. Cisterns and Tanks. (1902) net
1
0
Part IV. A Fireproof Floor. (1903) net
1
0
A Practical Treatise on Segmental and EllipticalOblique or Skew Arches. By G. J. Bell.Second edition, 17 plates, 125 pp. royal 8vo.(1906) net
1
1
0
Economics of Construction in relation to FramedStructures. By R. H. Bow. Third thousand,16 plates, 88 pp. 8vo. (1873)
5
0
Theory of Steel-Concrete Arches and of VaultedStructures. By W. Cain. Fourth edition, 27illus. 212 pp. 18mo, boards. (New York, 1906) net
2
0
Theory of Voussoir Arches. By Prof. W. Cain.Third edition, 201 pp. 18mo, boards. (New York,1905) net
2
0
New Formulæ for the Loads and Deflections ofSolid Beams and Girders. By W. Donaldson.Second edition, 8vo. (1872)
4
6
Plate Girder Railway Bridges. By M. Fitzmaurice.4 plates, 104 pp. 8vo. (1895)
6
0
Pocket Book of Calculations in Stresses. ByE. M. George. 66 illus. 140 pp. royal 32mo, halfroan. (1895)
3
6
Strains on Braced Iron Arches and Arched IronBridges. By A. S. Heaford. 39 pp. 8vo. (1883)
6
0
Tables for Roof Framing. By G. D. Inskip.Second edition, 451 pp. 8vo, leather. (New York,1905) net
12
6
Stresses in Girder and Roof Frames, for bothdead and live loads, by simple Multiplication,etc. By F. R. Johnson. 28 plates, 215 pp.crown 8vo. (1894)
6
0
A Graphical Method for Swing Bridges. ByB. F. La Rue. 4 plates, 104 pp. 18mo, boards.(New York, 1892) net
2
0
Notes on Cylinder Bridge Piers and the WellSystem of Foundations. By J. Newman. 144 pp.8vo. (1893)
6
0
A New Method of Graphic Statics applied in theConstruction of Wrought Iron Girders. By E.Olander. 16 plates, small folio. (1887)
10
6
Reference Book for Statical Calculations. ByF. Ruff. With diagrams, 140 pp. crown 8vo.(1906) net
5
0
The Strength and Proportion of Riveted Joints.By B. B. Stoney. 87 pp. 8vo. (1885)
5
0
The Anatomy of Bridgework. By W. H. Thorpe.103 illus. 190 pp. crown 8vo. (1906) net
6
0
CEMENT AND CONCRETE.
Portland Cement: its Manufacture, Testing and
Use. By D. B. Butler. Second edition, 97 illus.
396 pp. demy 8vo. (1905) net
16
0
Cement Users’ and Buyers’ Guide. By Calcare.
115 pp. 32mo, cloth. (1901) net
1
6
Cements, Mortars, and Concretes; their Physical
properties. By M. S. Falk. 78 illus. 176 pp.
8vo. (New York, 1904) net
10
6
Concrete Construction, Methods and Cost. By
H. P. Gillette and C. S. Hill. 310 illus.
690 pp. 8vo. (New York, 1908) net
1
1
0
Engineers’ Pocket-Book of Reinforced Concrete.
By E. L. Heidenreich. 164 illus. 364 pp. crown
8vo, leather, gilt edges. (New York, 1909) net
12
6
Reinforced Concrete. By E. McCulloch. 28
illus. 128 pp. crown 8vo. (New York, 1908) net
6
6
Concrete and Reinforced Concrete. By H. A.
Reid. 715 illus. 884 pp. royal 8vo. (New York,
1907) net
21
0
Theory and Design of Reinforced Concrete
Arches. By A. Reuterdahl. 41 illus. 126 pp.
8vo. (New York, 1908) net
8
6
Practical Cement Testing. By W. P. Taylor.
With 142 illus. 329 pp. demy 8vo. (New York.
1906) net
Levelling, Barometric, Trigonometric and Spirit.By I. O. Baker. Second edition, 15 illus. 145pp. 18mo, boards. (New York, 1908) net
2
0
Notes on Instruments best suited for EngineeringField Work in India and the Colonies. ByW. G. Bligh. 65 illus. 218 pp. 8vo. (1899)
7
6
The Sextant and other Reflecting MathematicalInstruments. By F. R. Brainard. 33 illus.120 pp. 18mo, boards. (New York, 1891) net
2
0
Practical Designing of Retaining Walls. ByProf. W. Cain. Fifth edition, 14 illus. 172 pp.18mo, boards. (New York, 1908) net
2
0
The Maintenance of Macadamised Roads. ByT. Codrington. Second edition, 186 pp. 8vo.(1892)
7
6
Retaining Walls in Theory and Practice. ByT. E. Coleman. 104 illus. 160 pp. crown 8vo.(1909) net
5
0
The Barometrical Determination of Heights.By F. J. B. Cordeiro. Crown 8vo, limp leather.(New York, 1898) net
4
6
On Curved Masonry Dams. By W. B. Coventry.8vo, sewed. (1894)
2
0
A Practical Method of Determining the Profileof a Masonry Dam. By W. B. Coventry.8vo, sewed. (1894)
2
6
The Stresses on Masonry Dams (oblique sections).By W. B. Coventry. 8vo, sewed. (1894)
2
0
Tables for facilitating the Calculation of Earthworks.By D. Cunningham. 120 pp. royal 8vo.
10
6
Handbook of Cost Data for Contractors andEngineers. By H. P. Gillette. 500 pp.crown 8vo, leather, gilt edges. (New York, 1904) net
17
0
Rock Excavation, Methods and Cost. By H. P.Gillette. 56 illus. 376 pp. crown 8vo. (New York,1904) net
12
6
High Masonry Dams. By E. S. Gould. Withillus. 88 pp. 18mo, boards. (New York, 1897) net
2
0
Grace’s Tables for Curves, with hints to youngengineers. 8 figures, 43 pp. oblong 8vo. (1908) net
5
0
Grace’s Earthwork Tables. 36 double-page tables,4to. (1907) net
12
6
Railway Tunnelling in Heavy Ground. By C.Gripper. 3 plates, 66 pp. royal 8vo. (1879)
7
6
Levelling and its General Application. By T.Holloway. Second edition, 53 illus. 147 pp. 8vo.(1895)
5
0
Waterways and Water Transport in differentCountries. By J. S. Jeans. 55 illus. 520 pp. 8vo.(1890) net
9
0
Table of Barometrical Heights to 20,000 Feet.By W. H. Mackesy, with some practical suggestionsby Sir Guildford Molesworth. 1 plate, 24pp. royal 32mo. (1882)
3
0
Aid Book to Engineering Enterprise. By E.Matheson. Third edition, illustrated, 916 pp.medium 8vo, buckram. (1898)
1
4
0
A Treatise on Surveying. By R. E. Middletonand O. Chadwick. Second edition, royal 8vo.
Part I. 11 plates, 296 pp. (1904)
10
6
Part II. Fully illustrated, 334 pp. (1906)
10
6
A Pocket Book of Useful Formulæ and Memoranda,for Civil and Mechanical Engineers. BySir G. L. Molesworth and H. B. Molesworth.With an Electrical Supplement by W. H. Molesworth.Twenty-sixth edition, 760 illus. 901 pp.royal 32mo, French morocco, gilt edges. (1908) net
5
0
The Pocket Books of Sir G. L. Molesworth andJ. T. Hurst, printed on India paper and boundin one vol. Royal 32mo, russia, gilt edges net
10
6
Metallic Structures: Corrosion and Fouling andtheir Prevention. By J. Newman. Illustrated,385 pp. crown 8vo. (1896)
9
0
Scamping Tricks and Odd Knowledge occasionallypractised upon Public Works. By J. Newman.New impression, 129 pp. crown 8vo. (1908) net
2
0
Earthwork Slips and Subsidences on PublicWorks. By J. Newman. 240 pp. crown 8vo.(1890)
7
6
Co-ordinate Geometry as applied to Land Surveying.By W. Pilkington. 5 illus. 44 pp. 12mo.(1909) net
1
6
Diagrams for the Graphic Calculation of EarthworkQuantities. By A. H. Roberts. Tencards, fcap. in cloth case net
10
6
Pioneering. By F. Shelford, illustrated. 88 pp.crown 8vo. (1909) net
3
0
Topographical Surveying. By G. J. Specht.Second edition, 2 plates and 28 illus. 210 pp. 18mo,boards. (New York, 1898) net
2
0
Spons’ Dictionary of Engineering, Civil, Mechanical,Military and Naval. 10,000 illus. 4300 pp.super royal 8vo. (1874, Supplement issued in 1881).
Complete with Supplement, in 11 divisions net
3
10
0
Ditto ditto in 4 vols. net
3
3
0
Surveying and Levelling Instruments. By W. F.Stanley. Third edition, 372 illus. 562 pp. crown8vo. (1901)
7
6
Surveyor’s Handbook. By T. U. Taylor. 116illus. 310 pp. crown 8vo, leather, gilt edges.(New York, 1908) net
8
6
Hints on Levelling Operations. By W. H.Wells. Second edition, 8vo, sewed. (1890)
1
0
The Drainage of Fens and Low Lands byGravitation and Steam Power. By W. H.Wheeler. 8 plates, 175 pp. 8vo. (1888)
12
6
Stadia Surveying, the theory of Stadia Measurements.By A. Winslow. Fifth edition, 148 pp.18mo, boards. (New York, 1902) net
2
0
Handbook on Tacheometrical Surveying. ByC. Xydis. 55 illus. 3 plates, 63 pp. 8vo. (1909) net
6
0
DICTIONARIES.
Technological Dictionary in the English, Spanish,German and French Languages. By D.Carlos Huelin Y Arssu. Crown 8vo.
Vol. I. English-Spanish-German-French.609 pp. (1906) net
10
6
Vol. II. German-English-French-Spanish.720 pp. (1908) net
10
6
Vols. III. and IV. In preparation.
English-French and French-English Dictionaryof the Motor-Car, Cycle and Boat. By F.Lucas. 171 pp. crown 8vo. (1905) net
5
0
Spanish-English Dictionary of Mining Terms.By F. Lucas. 78 pp. 8vo. (1905) net
5
0
English-Russian and Russian-English EngineeringDictionary. By L. Meycliar. 100 pp.16mo. (1909) net
2
6
DOMESTIC ECONOMY.
Food Adulteration and its Detection. By J. P.
Battershall. 12 plates, 328 pp. demy 8vo.
(New York, 1887)
15
0
How to Check Electricity Bills. By S. W.
Borden. 41 illus. 54 pp. crown 8vo. (New York,
1907) net
2
0
Practical Hints on Taking a House. By H. P.
Boulnois. 71 pp. 18mo. (1885)
1
6
The Cooking Range, its Failings and Remedies.
By F. Dye. 52 pp. fcap. 8vo, sewed. (1888)
0
6
The Kitchen Boiler and Water Pipes. By H.
Grimshaw. 8vo, sewed. (1887) net
1
0
Cookery and Domestic Management, including
economic and middle class Practical Cookery.
By K. Mellish. 56 coloured plates and 441
illus. 987 pp. super-royal 8vo. (1901) net
16
0
Spons’ Household Manual. 250 illus. 1043 pp.
demy 8vo. (1902)
7
6
Ditto ditto half-bound French
morocco
9
0
Handbook of Sanitary Information for Householders.
By R. S. Tracy. 33 illus. 114 pp.
18mo. (New York, 1900)
2
6
DRAWING.
The Ornamental Penman’s, Engraver’s and Sign
Writer’s Pocket Book of Alphabets. By B.
Alexander. Oblong 12mo, sewed
0
6
The Draughtsman’s Handbook of Plan and Map
Drawing. By G. G. Andre. 87 illus. and 34
plain and coloured plates, 162 pp. crown 4to. (1891)
9
0
Slide Valve Diagrams: a French Method for their
Construction. By L. Bankson. 18mo, boards.
(New York, 1892) net
2
0
A System of Easy Lettering. By J. H. Cromwell.
With Supplement by G. Martin. Sixth thousand,
oblong 8vo. (New York, 1900) net
2
0
Plane Geometrical Drawing. By R. C. Fawdry.
Illustrated, 185 pp. crown 8vo. (1901) net
3
0
Twelve Plates on Projection Drawing. By O.
Gueth. Oblong 4to. (New York, 1903) net
3
0
Hints on Architectural Draughtsmanship. By
G. W. T. Hallatt. Fourth edition, 80 pp.
18mo. (1906) net
1
6
A First Course of Mechanical Drawing (Tracing).
By G. Halliday. Oblong 4to, sewed
2
0
A Manual of Mechanical Drawing. By P. D.
Johnston. 68 plates and 20 pp. squared paper,
149 pp. oblong 8vo. (New York, 1903) net
8
0
Drawings for Medium-sized Repetition Work.
By R. D. Spinney. With 47 illus. 130 pp. 8vo.
(1909) net
3
6
Mathematical Drawing Instruments. By W. F.
Stanley. Seventh edition, 265 illus. 370 pp.
crown 8vo. (1900)
5
0
ELECTRICAL ENGINEERING.
Electric Bell Construction. By F. C. Allsop.Second edition, 177 illus. 143 pp. crown 8vo. (1900)
3
6
Practical Electric Bell Fitting. By F. C. Allsop.Tenth edition, 186 illus. including 8 folding plates,185 pp. crown 8vo. (1903)
3
6
Telephones: their Construction and Fitting. ByF. C. Allsop. Eighth edition, 184 illus. 222 pp.crown 8vo. (1909)
3
6
Thermo-electric Reactions and Currents betweenMetals in Fused Salts. By T. Andrews. 8vo,sewed. (1896)
1
0
Auto-Transformer Design. By A. H. Avery.25 illus. 60 pp. 8vo. (1909) net
3
6
Principles of Electric Power (Continuous Current)for Mechanical Engineers. By A. H. Bate.63 illus. 204 pp. crown 8vo. (1905) (FinsburyTechnical Manual) net
4
6
Practical Construction of Electric Tramways.By William R. Bowker. 93 illus. 119 pp. 8vo.(1903) net
6
0
Design and Construction of Induction Coils.By A. F. Collins. 155 illus. 272 pp. demy 8vo.(New York, 1909) net
12
6
Switchboard Measuring Instruments for Continuousand Polyphase Currents. By J. C.Connan. 117 illus. 150 pp. 8vo, cloth. (1908) net
5
0
Management of Electrical Machinery. By F. B.Crocker and S. S. Wheeler. Eighth edition,131 illus. 223 pp. crown 8vo. (New York, 1909) net
4
6
Electric Lighting: A Practical Exposition of theArt. By F. B. Crocker. Royal 8vo. (New York.)
Vol. I. The Generating Plant. Sixthedition, 213 illus. 470 pp. (1904) net
12
6
Vol. II. Distributing Systems andLamps. Second edition, 391 illus.505 pp. (1905) net
12
6
Elementary Telegraphy and Telephony. ByArthur Crotch. 238 illus. 223 pp. 8vo. (1903)(Finsbury Technical Manual) net
4
6
Electricity and Magnetism in Telephone Maintenance.By G. W. Cummings. 45 illus. 137 pp.8vo. (New York, 1908) net
6
6
Grouping of Electric Cells. By W. F. Dunton.4 illus. 50 pp. fcap. 8vo. (1906) net
1
6
Magnets and Electric Currents. By Prof. J. A.Fleming. Second edition, 136 illus. 417 pp.crown 8vo. net
5
0
Notes on Design of Small Dynamo. By GeorgeHalliday. Second edition, 8 plates, 8vo. (1895)
2
6
Practical Alternating Currents and PowerTransmission. By N. Harrison. 172 illus.375 pp. crown 8vo. (New York, 1906) net
10
6
Making Wireless Outfits. By N. Harrison. 27illus. 61 pp. crown 8vo, limp. (New York, 1909) net
1
6
Wireless Telephone Construction. By N. Harrison.43 illus. 73 pp. crown 8vo, limp. (NewYork, 1909) net
1
6
The Phœnix Fire Office Rules for Electric Lightand Electrical Power Installations. By M.Heaphy. Thirty-seventh edition, 8vo, sewed.(1908)
0
6
Testing Telegraph Cables. By Colonel V. Hoskiœr.Third edition, crown 8vo. (1889)
4
6
Electric Cables, their Construction and Cost.By D. Coyle and F. J. O. Howe. With manydiagrams and 216 tables, 464 pp. crown 8vo,leather. (In the Press.)
Long Distance Electric Power Transmission.By R. W. Hutchinson. 136 illus. 345 pp. crown8vo. (New York, 1907) net
12
6
Theory and Practice of Electric Wiring. ByW. S. Ibbetson. 119 illus. 366 pp. crown 8vo.(1909) net
5
0
General Rules recommended for Wiring for theSupply of Electrical Energy. Issued by TheInstitution of Electrical Engineers. 8vo,sewed. (Revised, April 1907) net
0
6
Form of Model General Conditions recommendedby The Institution of ElectricalEngineers for use in connection with ElectricalContracts. 8vo, sewed. (1906) net
1
0
A Handbook of Electrical Testing. By H. R.Kempe. Seventh edition, 285 illus. 706 pp. demy8vo. (1908) net
18
0
Application of Electricity to Railway Working.By W. E. Langdon. 142 illus. and 5 plates,347 pp. 8vo. (1897)
10
6
How to Become a Competent Motorman. ByV. B. Livermore and J. Williams. 45 illus.252 pp. 12mo. (New York, 1903) net
4
6
Electromagnets, their design and construction. ByA. N. Mansfield. 36 illus. 155 pp. 18mo, boards.(New York, 1901) net
6
6
Telephone Construction, Methods and Cost.By C. Mayer. With Appendices on the cost ofmaterials and labour by J. C. Slippy. 103 illus.284 pp. crown 8vo. (New York, 1908) net
12
6
Induction Coils. By N. H. Schneider. Secondedition, 79 illus. 285 pp. crown 8vo. (New York,1901) net
4
6
Electric Gas Lighting. By N. H. Schneider.57 illus. 101 pp. 12mo. (New York, 1901) net
2
0
How to Install Electric Bells, Annunciators andAlarms. By N. H. Schneider. 59 illus. 63 pp.crown 8vo, limp. (New York, 1905) net
1
6
Modern Primary Batteries, their construction, useand maintenance. By N. H. Schneider. 54illus. 94 pp. crown 8vo, limp. (New York, 1905) net
1
6
Practical Engineers’ Handbook on the Careand Management of Electric Power Plants.By N. H. Schneider. 203 illus. 274 pp. crown8vo. (New York, 1906) net
5
0
Electrical Circuits and Diagrams, illustrated andexplained. By N. H. Schneider. 8vo, limp.(New York)
Part 1. 217 illus. 72 pp. (1905) net
1
6
Part 2. 73 pp. (1909) net
1
6
Electrical Instruments and Testing. By N. H.Schneider. Third edition. 133 illus. 239 pp.crown 8vo. (New York, 1907) net
4
6
Experimenting with Induction Coils. By N. H.Schneider. 26 illus. 73 pp. crown 8vo, limp.(New York, 1906) net
1
6
Study of Electricity for Beginners. By N. H.Schneider. 54 illus. 88 pp. crown 8vo, limp.(New York, 1905) net
1
6
Practical Electrics: a Universal Handybook onEvery Day Electrical Matters. Seventh edition,126 illus. 135 pp. 8vo. (New York, 1902) net
1
6
The Voltaic Accumulator: an elementary treatise.By E. Reynier. Translated from the French byJ. A. Berly. 62 illus. 202 pp. 8vo.
9
0
Dry Batteries: how to Make and Use them. By aDry Battery Expert. With additional notesby N. H. Schneider. 30 illus. 59 pp. crown 8vo,sewed. (New York, 1905) net
1
0
The Diseases of Electrical Machinery. ByE. Schulz. Edited, with a Preface, by Prof.S. P. Thompson. 42 illus. 84 pp. crown 8vo. net
2
0
Electric Toy-Making. By T. O. Sloane. Fifteenthedition, 70 illus. 183 pp. crown 8vo. (NewYork, 1903) net
4
6
Electricity Simplified. By T. O. Sloane. Tenthedition, 29 illus. 158 pp. crown 8vo. (New York,1901) net
4
6
How to become a Successful Electrician. ByT. O. Sloane. Third edition, illustrated, crown8vo. (New York, 1899) net
4
6
Electricity: its Theory, Sources and Applications.By J. T. Sprague. Third edition, 109 illus.658 pp. crown 8vo. (1892) net
7
6
Telegraphic Connections. By C. Thom andW. H. Jones. 20 plates, 59 pp. oblong 8vo. (NewYork, 1892) net
3
6
Röntgen Rays and Phenomena of the Anode andCathode. By E. P. Thompson and W. A.Anthony. 105 illus. 204 pp. 8vo. (New York,1896) net
4
6
Dynamo Electric Machinery. By Prof. S. P.Thompson. Seventh edition, demy 8vo. (FinsburyTechnical Manual.)
Vol. I. Continuous-Current Machinery.With 4 coloured and 30 foldingplates, 573 illus. 984 pp. (1904) net
1
10
0
Vol. II. Alternating Current Machinery.15 coloured and 24 folding plates,546 illus. 900 pp. (1905) net
1
10
0
Design of Dynamos (Continuous Currents). ByProf. S. P. Thompson. 4 coloured and 8 foldingplates, 243 pp. demy 8vo. (1903) net
12
0
Schedule for Dynamo Design, issued with theabove. 6d. each, 4s. per doz., or 18s. per 100 net
Curves of Magnetic Data for Various Materials.A reprint on transparent paper for office use ofPlate L from Dynamo Electric Machinery, andmeasuring 25 in. by 16 in. net
0
7
The Electromagnet. By C. R. Underhill. 67illus. 159 pp. crown 8vo. (New York, 1903) net
6
6
Practical Guide to the Testing of InsulatedWires and Cables. By H. L. Webb. Fifthedition, 38 illus. 118 pp. crown 8vo. (New York,1902) net
4
6
FOREIGN EXCHANGE.
English Prices with Russian Equivalents. By
A. Adiassewich. 182 pp. fcap. 32mo, roan. (1908) net
1
0
English Prices with German Equivalents.
English prices per lb., with equivalents in marks
per kilogramme. By St. Koczorowski. 95 pp.
fcap. 32mo, roan. (1909) net
1
0
English Prices with French Equivalents.
English prices per lb. to francs per kilogramme.
By H. P. McCartney. 97 pp. 32mo, roan.
(1907) net
1
0
Principles of Foreign Exchange. By E. Matheson.
Fourth edition, 54 pp. 8vo, sewed. (1905) net
0
3
GAS AND OIL ENGINES.
The Theory of the Gas Engine. By D. Clerk.
Edited by F. E. Idell. Third edition, 19 illus.
180 pp. 18mo, boards. (New York, 1903) net
2
0
The Design and Construction of Oil Engines.
By A. H. Goldingham. Second edition, 108
illus. 255 pp. crown 8vo. (New York, 1904) net
6
6
Gas Engine in Principle and Practice. By A. H.
Goldingham. 107 illus. 195 pp. 8vo, cloth. (New
York, 1907) net
6
6
Practical Hand-Book on the Care and Management
of Gas Engines. By G. Lieckfeld.
Third edition, square 16mo. (New York, 1896)
3
6
Elements of Gas Engine Design. By S. A. Moss.
197 pp. 18mo, boards. (New York, 1907) net
2
0
Gas Engines and their Troubles. By E. W.
Roberts, with chapters on the Design and Construction
of Launches, by Prof. W. F. Durand.
38 illus. 143 pp. crown 8vo. (New York, 1903) net
4
6
Gas and Petroleum Engines. A Manual for Students
and Engineers. (Finsbury Technical
Manual.) By Prof. W. Robinson. Third edition
in preparation
GAS LIGHTING.
Gas Analyst’s Manual (incorporating Hartley’s“Gas Analyst’s Manual” and “Gas Measurement”).By J. Abady. 102 illustrations, 576pp. demy 8vo. (1902) net
18
0
Gas Works: their Arrangement, Construction, Plantand Machinery. By F. Colyer. 31 foldingplates, 134 pp. 8vo. (1884) net
8
6
Transactions of the Institution of Gas Engineers.Edited by Walter T. Dunn, Secretary.Published annually. 8vo. net
10
6
Lighting by Acetylene. By F. Dye. 75 illus.200 pp. crown 8vo. (1902) net
6
0
A Comparison of the English and FrenchMethods of Ascertaining the IlluminatingPower of Coal Gas. By A. J. Van Eijndhoven.Illustrated, crown 8vo. (1897)
4
0
Gas Lighting and Gas Fitting. By W. P. Gerhard.Second edition, 190 pp. 18mo, boards. (New York,1894) net
2
0
A Treatise on the Comparative CommercialValues of Gas Coals and Cannels. By D. A.Graham. 3 plates, 100 pp. 8vo. (1882)
4
6
The Gas Engineer’s Laboratory Handbook. ByJ. Hornby. Second edition, 69 illus. 328 pp.crown 8vo. (1902) net
6
0
HISTORICAL AND BIOGRAPHICAL.
Extracts from the Private Letters of the lateSir William Fothergill Cooke, 1836-9, relatingto the Invention and Development of the ElectricTelegraph; also a Memoir by Latimer Clark.Edited by F. H. Webb. Sec. Inst. E. E. 8vo. (1895)
3
0
A Chronology of Inland Navigation in GreatBritain. By H. R. De Salis. Crown 8vo. (1897)
4
6
A History of Electric Telegraphy to the year1837. By J. J. Fahie. 35 illus. 542 pp. crown 8vo.(1889)
2
0
History and Development of Steam Locomotionon Common Roads. By W. Fletcher. 109illus. 288 pp. 8vo.
5
0
Life as an Engineer: its Lights, Shades, andProspects. By J. W. C. Haldane. 23 plates,338 pp. crown 8vo. (1905) net
5
0
Philipp Reis, Inventor of the Telephone: a BiographicalSketch. By Prof. S. P. Thompson.8vo, cloth. (1883)
7
6
The Development of the Mercurial Air Pump.By Prof. S. P. Thompson. Illustrated, royal 8vo,sewed. (1888)
1
6
HOROLOGY.
Watch and Clock Maker’s Handbook, Dictionary
and Guide. By F. J. Britten. Tenth
edition, 450 illus. 492 pp. crown 8vo. (1902) net
5
0
The Springing and Adjusting of Watches. By
F. J. Britten. 75 illus. 152 pp. crown 8vo.
(1898) net
3
0
Prize Essay on the Balance Spring and its Isochronal
Adjustments. By M. Immisch. 7 illus.
50 pp. crown 8vo. (1872)
Pumps: Historically, Theoretically and PracticallyConsidered. By P. R. Björling. Second edition,156 illus. 234 pp. crown 8vo. (1895)
7
6
Pump Details. By P. R. Björling. 278 illus.211 pp. crown 8vo. (1892)
7
6
Pumps and Pump Motors: A Manual for the useof Hydraulic Engineers. By P. R. Björling.Two vols. 261 plates, 369 pp. royal 4to. (1895) net
1
10
0
Practical Handbook on Pump Construction.By P. R. Björling. Second edition, 9 plates,90 pp. crown 8vo. (1904)
5
0
Water or Hydraulic Motors. By P. R. Björling.206 illus. 287 pp. crown 8vo. (1903)
9
0
Hydraulic Machinery, with an Introduction toHydraulics. By R. G. Blaine. Second editionwith 307 illus. 468 pp. 8vo. (Finsbury TechnicalManual). (1905) net
14
0
Practical Hydraulics. By T. Box. Fifteenthedition, 8 plates, 88 pp. crown 8vo. (1909) net
5
0
Hydraulic, Steam, and Hand Power Lifting andPressing Machinery. By F. Colyer. Secondedition, 88 plates, 211 pp. imperial 8vo. (1892) net
10
6
Pumps and Pumping Machinery. By F. Colyer.
Vol. I. Second edition, 53 plates, 212 pp. 8vo.(1892) net
10
6
Vol. II. Second edition, 48 plates, 169 pp. 8vo.(1900) net
10
6
Construction of Horizontal and Vertical Waterwheels.By W. Cullen. Second edition, small4to. (1871)
5
0
Tables giving Hydraulic Mean Depth and Areaof Circular Sewers. By R. De Salis. 8vo,sewed
1
0
Donaldson’s Poncelet Turbine and Water PressureEngine and Pump. By W. Donaldson.4to. (1883)
5
0
Principles of Construction and Efficiency ofWaterwheels. By W. Donaldson. 13 illus.94 pp. 8vo. (1876)
5
0
Practical Hydrostatics and Hydrostatic Formulæ.By E. S. Gould. 27 illus. 114 pp. 18mo, boards.(New York, 1903) net
2
0
Hydraulic and other Tables for purposes ofSewerage and Water Supply. By T. Hennell.Third edition, 70 pp. crown 8vo. (1908) net
4
6
Hydraulic Tables for finding the Mean Velocity andDischarge in Open Channels. By T. Higham.Second edition, 90 pp. super-royal 8vo. (1898)
7
6
Tables for Calculating the Discharge of Waterin Pipes for Water and Power Supplies. Indexedat side for ready reference. By A. E. Silk.63 pp. crown 8vo. (1899)
5
0
Simple Hydraulic Formulæ. By T. W. Stone.9 plates, 98 pp. crown 8vo. (1881)
4
0
INDUSTRIAL CHEMISTRY AND MANUFACTURES.
Perfumes and their Preparation. By G. W.Askinson. Translated from the Third GermanEdition by I. Fuest. Third edition, 32 illus.312 pp. 8vo. (New York, 1907) net
12
6
Brewing Calculations, Gauging and Tabulation.By C. H. Bater. 340 pp. 64mo, roan, gilt edges.(1897) net
1
6
A Pocket Book for Chemists, Chemical Manufacturers,Metallurgists, Dyers, Distillers, etc.By T. Bayley. Seventh edition, 550 pp. royal32mo, roan, gilt edges net
5
0
Practical Receipts for the Manufacturer, theMechanic, and for Home use. By Dr. H. R.Berkeley and W. M. Walker. 250 pp. demy8vo. (1902) net
7
6
A Treatise on the Manufacture of Soap andCandles, Lubricants and Glycerine. By W. L.Carpenter and H. Leask. Second edition,104 illus. 456 pp. crown 8vo. (1895)
12
6
A Text Book of Paper Making. By C. F. Crossand E. J. Bevan. Third edition, 97 illus. 411 pp.crown 8vo. (1907) net
12
6
C.B.S. Standard Units and Standard PaperTests. By C. F. Cross, E. J. Bevan, C. Beadleand R. W. Sindall. 25 pp. crown 4to. (1903) net
2
6
Soda Fountain Requisites. A Practical ReceiptBook for Druggists, Chemists, etc. By G. H.Dubelle. Third edition, 157 pp. crown 8vo.(New York, 1905) net
4
6
The Chemistry of Fire and Fire Prevention. ByH. and H. Ingle. 45 illus. 290 pp. crown 8vo.(1900)
9
0
Ice-Making Machines. By M. Ledoux and others.Sixth edition. 190 pp. 18mo, boards. (NewYork, 1906) net
2
0
Brewing with Raw Grain. By T. W. Lovibond.75 pp. crown 8vo. (1883)
5
0
Sugar, a Handbook for Planters and Refiners.By the late J. A. R. Newlands and B. E. R.Newlands. 236 illus. 876 pp. demy 8vo. (London,1909) net
1
5
0
Principles of Leather Manufacture. By Prof.H. R. Procter. 101 illus. 520 pp. medium 8vo. net
18
0
Leather Industries Laboratory Handbook ofAnalytical and Experimental methods. By H. R.Procter. Second edition, 4 plates, 46 illus.450 pp. demy 8vo. (1908) net
18
0
Theoretical and Practical Ammonia Refrigeration.By I. I. Redwood. Sixth thousand,15 illus. 146 pp. square 16mo. (New York, 1909) net
4
6
Breweries and Maltings. By G. Scammell andF. Colyer. Second edition, 20 plates, 178 pp.8vo. (1880) net
6
0
Factory Glazes for Ceramic Engineers. ByH. Rum-Bellow. Folio. Series A, LeadlessSanitary Glazes. (1908) net
2
2
0
Text Book of Physical Chemistry. By C. L.Speyers. 224 pp. demy 8vo. (New York, 1898)
9
0
Spons’ Encyclopædia of the Industrial Arts,Manufactures and Commercial Products.1500 illus. 2100 pp. super-royal 8vo. In 2 Vols. cloth
3
10
0
Pigments, Paints and Painting. By G. Terry.49 illus. 392 pp. crown 8vo. (1893)
7
6
Tables for the Quantitative Estimation of theSugars. By E. Wein and W. Frew. Crown 8vo.(1896)
6
0
Workshop Receipts. For the use of Manufacturers,Mechanics and Scientific Amateurs.New and thoroughly revised edition, crown 8vo.(1909) each net
3
0
Vol. I. Acetylene Lighting to Drying.223 illus. 532 pp.
Vol. II. Dyeing to Japanning. 259 illus.540 pp.
Vol. III. Jointing Pipes to Pumps.
Vol. IV.
Practical Handbook on the Distillation of Alcoholfrom Farm Products. By F. B. Wright.Second edition, 60 illus. 271 pp. crown 8vo. (NewYork, 1907) net
4
6
The Manufacture of Chocolate and other CacaoPreparations. By P. Zipperer. Second edition,87 illus. 280 pp. royal 8vo. (1902) net
16
0
IRRIGATION.
The Irrigation Works of India. By R. B.Buckley. Second edition, with coloured mapsand plans. 336 pp. 4to, cloth. (1905) net
2
2
0
Facts, Figures, and Formulæ for IrrigationEngineers. By R. B. Buckley. With illus.239 pp. large 8vo. (1908) net
10
6
Irrigated India. By Hon. Alfred Deakin. WithMap, 322 pp. 8vo. (1893)
8
6
Indian Storage Reservoirs, with Earthen Dams.By W. L. Strange. 14 plates and 53 illus. 379pp. demy 8vo. (1904) net
1
1
0
Irrigation Farming. By L. M. Wilcox. Revisededition, 113 illus. 494 pp. crown 8vo. (NewYork) net
8
6
Egyptian Irrigation. By Sir W. Willcocks.Second edition out of Print. A few copies of the First Edition (1889) are still tobe had. Price 15s. net.
The Nile Reservoir Dam at Assuân, and After.By Sir W. Willcocks. Second edition, 13 plates,super-royal 8vo. (1903) net
6
0
The Assuân Reservoir and Lake Moeris. BySir W. Willcocks. With text in English,French and Arabic. 5 plates, 116 pp. super-royal8vo. (1904) net
5
0
The Nile in 1904. By Sir W. Willcocks.30 plates, 200 pp. super-royal 8vo. (1904) net
9
0
LOGARITHM TABLES.
Aldum’s Pocket Folding Mathematical Tables.Four-figure logarithms, and Anti-logarithms,Natural Sines, Tangents, Cotangents, Cosines,Chords and Radians for all angles from 1 to 90degrees. On folding card. Net 4d. 20 copies,net 6s.
Tables of Seven-figure Logarithms of the NaturalNumbers from 1 to 108,000. By C. Babbage.Stereotype edition, 8vo.
7
6
Short Logarithmic and other Tables. By W. C.Unwin. Fourth edition, small 4to
3
0
A. B. C. Five-figure Logarithms for general use,with lateral index for ready reference. By C. J.Woodward. Second edition, with cut lateralIndex, 116 pp. 12mo, limp leather net
3
0
MARINE ENGINEERING AND NAVAL ARCHITECTURE.
Marine Propellers. By S. W. Barnaby. Fifthedition, 5 plates, 56 illus. 185 pp. demy 8vo.(1908) net
10
6
Marine Engineer’s Record Book: Engines.By B. C. Bartley. 8vo, roan net
5
0
The Engineer’s and Draughtsman’s Data Bookfor Workshop and Office Use. Third edition,crown 8vo, roan
3
0
Yachting Hints, Tables and Memoranda. By A. C.Franklin. Waistcoat pocket size, 103 pp. 64mo,roan, gilt edges net
1
0
Ditto ditto in celluloid case net
1
6
Steamship Coefficients, Speeds and Powers.By C. F. A. Fyfe. 31 plates, 280 pp. fcap. 8vo,leather. (1907) net
10
6
Steamships and Their Machinery, from first tolast. By J. W. C. Haldane. 120 illus. 532 pp.8vo. (1893)
15
0
Tables for Constructing Ships’ Lines. ByA. Hogg. Second edition, 8vo.
7
0
Submarine Boats. By G. W. Hovgaard. 2 plates,98 pp. crown 8vo. (1887)
5
0
Tabulated Weights of Angle, Tee, Bulb, Round,Square, and Flat Iron and Steel for the use ofNaval Architects, Ship-builders, etc. By C. H.Jordan. Fifth edition, 579 pp. royal 32mo,French morocco, gilt edges. (1896)
7
6
Particulars of Dry Docks, Wet Docks, Wharves,etc. on the River Thames. Compiled by C. H.Jordan. Second edition, 7 coloured charts, 103pp. oblong 8vo. (1904) net
2
6
Marine Transport of Petroleum. By H. Little.66 illus. 263 pp. crown 8vo. (1890)
10
6
Questions and Answers for Marine Engineers,with a Practical Treatise on Breakdowns at Sea.By T. Lucas. 12 folding plates, 515 pp. giltedges, crown 8vo. (New York, 1902) net
8
0
Reed’s Examination Papers for Extra FirstClass Engineers. Fourth edition, 14 plates and188 illus. 550 pp. 8vo. (1902) net
18
0
Reed’s Engineers’ Handbook to the Board ofTrade Examinations for certificates of Competencyas First and Second Class Engineers.Nineteenth edition, 37 plates, 358 illus. 696 pp.8vo. net
14
0
Reed’s Polyglot Guide to the Marine Engine, inEnglish, French, German and Norsk. Secondedition, oblong 8vo. (1900) net
6
0
Reed’s Marine Boilers. Second edition, crown 8vo. net
4
6
Reed’s Useful Hints to Sea-going Engineers.Fourth edition, 8 plates, 50 illus. 312 pp. crown8vo. (1903) net
3
6
Naval Architects’ and Engineers’ Data Book.By T. H. Watson. Fcap. 8vo, cloth net
3
6
MATERIALS.
Practical Treatise on the Strength of Materials.By T. Box. Fourth edition, 27 plates, 536 pp.8vo. (1902) net
12
6
Treatise on the Origin, Progress, Preventionand Cure of Dry Rot in Timber. By T. A.Britton. 10 plates, 519 pp. crown 8vo. (1875)
7
6
Twenty Years’ Practical Experience of NaturalAsphalt and Mineral Bitumen. By W. H.Delano. 33 illus. 73 pp. crown 8vo, parchment.(1893)
2
0
Stone: how to get it and how to use it. By Major-Gen.C. E. Luard, R.E. 8vo, sewed. (1890)
2
0
Testing of Pipes and Pipe-joints in the OpenTrenches. By M. M. Paterson. 8vo, sewed(1879)
2
0
Lubricants, Oils and Greases. By I. I. Redwood.3 plates, 8vo. (1898)
4
6
Practical Treatise on Mineral Oils and theirBy-Products. By I. I. Redwood. 67 illus. 336 pp.demy 8vo. (1897)
15
0
Silico-Calcareous Sandstones, or Building Stonesfrom Quartz, Sand and Lime. By E. Stoffler.5 plates, 8vo, sewed. (1901) net
4
0
Proceedings of the International Associationfor Testing Materials. English edition.Issued irregularly. Price varies.
MATHEMATICS.
Imaginary Quantities. By M. Argand. Translatedby Prof. Hardy. 18mo, boards. (New York) net
2
0
Text Book of Practical Solid Geometry. ByE. H. de V. Atkinson. Revised by Major B. R.Ward, R.E. Second edition, 17 plates, 8vo.(1901)
7
6
Quick and Easy Methods of Calculating, andthe Theory and Use of the Slide Rule. ByR. G. Blaine. Third edition, 6 illus. 152 pp.16mo, leather cloth. (1907)
2
6
Symbolic Algebra, or the Algebra of AlgebraicNumbers. By W. Cain. 18mo, boards. (NewYork) net
2
0
Nautical Astronomy. By J. H. Colvin. 127 pp.crown, 8vo. (1901) net
2
6
Chemical Problems. By J. C. Foye. Fourth edition,141 pp. 18mo, boards. (New York, 1898) net
2
0
Primer of the Calculus. By E. S. Gould. Secondedition, 24 illus. 122 pp. 18mo, boards. (NewYork, 1899) net
2
0
Elementary Treatise on the Calculus for EngineeringStudents. By J. Graham. Third edition,276 pp. crown 8vo. (1905). (Finsbury TechnicalManual)
7
6
Manual of the Slide Rule. By F. A. Halsey.Second edition, 31 illus. 84 pp. 18mo, boards.(New York, 1901) net
2
0
Reform in Chemical and Physical Calculations.By C. J. T. Hanssen. 4to. (1897) net
6
6
Algebra Self-Taught. By P. Higgs. Third edition,104 pp. crown 8vo. (1903)
2
6
Galvanic Circuit investigated Mathematically.By G. S. Ohm. Translated by William Francis.269 pp. 18mo, boards. (New York, 1891) net
2
0
Elementary Practical Mathematics. By M. T.Ormsby. 420 pp. demy 8vo. (1900) net
7
6
Elements of Graphic Statics. By K. Von Ott.Translated by G. S. Clarke. 93 illus. 128 pp.crown 8vo. (1901)
5
0
Figure of the Earth. By F. C. Roberts. 18mo,boards. (New York) net
2
0
Arithmetic of Electricity. By T. O’C. Sloane.Thirteenth edition, crown 8vo. (New York,1901) net
4
6
Graphic Method for Solving certain Questionsin Arithmetic or Algebra. By G. L. Vose.Second edition with 28 illus. 62 pp. 18mo, boards.(New York, 1902) net
2
0
Problems in Electricity. A Graduated Collectioncomprising all branches of Electrical Science.By R. Weber. Translated from the French byE. A. O’Keefe. 34 illus. 366 pp. crown 8vo.(1902) net
7
6
MECHANICAL ENGINEERING.
Steam Engines and Boilers, etc.
Handbook for Mechanical Engineers. By Hy.Adams. Fourth edition, 426 pp. crown 8vo.(1897) net
4
6
Appleby’s Handbooks of Machinery. Manyillustrations, 8vo. Sections 2, 3, 4 and 6 each
3
6
Section 5
5
0
Section 1.—Prime Movers. Out of Print.
Section 2.—Hoisting Machinery, Winding Engines, etc.
Section 3.—Pumping Machinery and Pumping Engines.
Section 4.—Machine Tools and Accessories.
Section 5.—Contractors’ Plant and Railway Materials.
Section 6.—Mining, Colonial and Manufacturing Machinery.
Engineers’ Sketch Book of Mechanical Movements.By T. W. Barber. Fifth edition, 3000illus. 355 pp. 8vo. (1906) net
10
6
The Repair and Maintenance of Machinery. ByT. W. Barber. 417 illus. 476 pp. 8vo. (1895)
10
6
Slide Valve and its Functions, with specialreference to Modern Practice in the UnitedStates. By J. Begtrup. 90 diagrams, 146 pp.medium 8vo. (New York, 1902) net
8
0
Practical Treatise on Mill Gearing. By T. Box.Fifth edition, 11 plates, 128 pp. crown 8vo.(1892)
7
6
Safety Valves. By R. H. Buell. Third edition,20 illus. 100 pp. 18mo, boards. (New York, 1898) net
2
0
Machine Design. By Prof. W. L. Cathcart. Part I. Fastenings. 123 illus. 291 pp.demy 8vo. (New York, 1903) net
12
6
Chimney Design and Theory. By W. W.Christie. Second edition, 54 illus. 192 pp.crown 8vo. (New York, 1902) net
12
6
Furnace Draft: its Production by MechanicalMethods. By W. W. Christie. 5 illus. 80 pp.18mo, boards. (New York, 1906) net
2
0
Working and Management of Steam Boilersand Engines. By F. Colyer. Second edition,108 pp. crown 8vo. (1902)
3
6
The Stokers’ Catechism. By W. J. Connor.63 pp. limp cloth. (1906) net
1
0
Treatise on the use of Belting for the Transmissionof Power. By J. H. Cooper. Fifth edition, 94 illus.399 pp. demy 8vo. (New York, 1901) net
12
6
The Steam Engine considered as a ThermodynamicMachine. By J. H. Cotterill. Thirdedition, 39 diagrams, 444 pp. 8vo. (1896)
15
0
Fireman’s Guide, a Handbook on the Care ofBoilers. By K. P. Dahlstrom. Ninth editionfcap. 8vo. (New York, 1902) net
1
6
Diseases of a Gasolene Automobile, and How toCure Them. By A. L. Dyke and G. P. Dorris.127 illus. 201 pp. crown 8vo. (New York, 1903) net
6
6
Belt Driving. By G. Halliday. 3 folding plates,100 pp. 8vo. (1894)
3
6
Worm and Spiral Gearing. By F. A. Halsey.13 plates, 85 pp. 18mo, boards. (New York) net
2
0
Commercial Efficiency of Steam Boilers. ByA. Hanssen. Large 8vo, sewed. (1898)
0
6
Corliss Engine. By J. T. Henthorn. Thirdedition, 23 illus. 95 pp. square 16mo. (New York,1904)
3
6
Liquid Fuel for Mechanical and Industrial Purposes.By E. A. Brayley Hodgetts. 106 illus. 129 pp.8vo. (1890)
5
0
Elementary Text-Book on Steam Engines andBoilers. By J. H. Kinealy. Fourth edition,106 illus. 259 pp. 8vo. (New York, 1903) net
8
6
Centrifugal Fans. By J. H. Kinealy. 33 illus.206 pp. fcap. 8vo, leather. (New York, 1905) net
12
6
Mechanical Draft. By J. H. Kinealy. 27 originaltables and 13 plates, 142 pp. crown 8vo. (NewYork, 1906) net
8
6
The A. B. C. of the Steam Engine, with adescription of the Automatic Governor. ByJ. P. Lisk. 6 plates, 12mo. (New York, 1902) net
2
0
Valve Setting Record Book. By P. A. Low. 8vo,boards
1
6
The Lay-out of Corliss Valve Gears. By S. A.Moss. Second edition, 3 plates, 108 pp. 18mo,boards. (New York, 1906) net
2
0
Steam Boilers, their Management and Working.By J. Peattie. Fifth edition, 35 illus. 230 pp.crown 8vo. (1906) net
4
6
Treatise on the Richards Steam Engine Indicator.By C. T. Porter. Sixth edition, 3 platesand 73 diagrams, 285 pp. 8vo. (1902)
9
0
Practical Treatise on the Steam Engine. ByA. Rigg. Second edition, 103 plates, 378 pp.demy 4to. (1894)
1
5
0
Slide Valve Simply Explained. By W. J. Tennant.Revised by J. H. Kinealy. 41 illus.83 pp. crown 8vo. (New York, 1899) net
4
6
Shaft Governors. By W. Trinks and C. Hoosum.27 illus. 97 pp. 18mo, boards. (New York, 1905) net
2
0
Slide and Piston Valve Geared Steam Engines.By W. H. Uhland. 47 plates and 314 illus. 155 pp.Two vols. folio, half morocco. (1882)
1
16
0
How to run Engines and Boilers. By E. P.Watson. Fifth edition, 31 illus. 160 pp. crown8vo. (New York, 1904)
3
6
Position Diagram of Cylinder with Meyer Cut-off.By W. H. Weightman. On card. (NewYork) net
1
0
Practical Method of Designing Slide ValveGearing. By E. J. Welch. 69 diagrams, 283 pp.Crown 8vo. (1890)
6
0
Elements of Mechanics. By T. W. Wright.Illustrated, 372 pp. 8vo. (New York, 1896)
10
6
METALLURGY.
Iron and Steel Manufacture.
Life of Railway Axles. By T. Andrews. 8vo,sewed. (1895)
1
0
Microscopic Internal Flaws in Steel Rails andPropeller Shafts. By T. Andrews. 8vo, sewed.(1896)
1
0
Microscopic Internal Flaws, Inducing Fracturein Steel. By T. Andrews. 8vo, sewed. (1896)
2
0
Relations between the Effects of Stresses slowlyapplied and of Stresses suddenly applied in thecase of Iron and Steel: Comparative Testswith Notched and Plain Bars. By P. Breuil.23 plates and 60 illus. 151 pp. 8vo. (1904) net
8
0
Brassfounders’ Alloys. By J. F. Buchanan. Illustrated,129 pp. crown 8vo. (1905) net
4
6
Foundry Nomenclature. The Moulder’s PocketDictionary and concise guide to Foundry Practice.By John F. Buchanan. Illustrated, 225 pp.crown 8vo. (1903) net
5
0
American Standard Specifications for Steel. ByA. L. Colby. Second edition, revised, 103 pp.crown 8vo. (New York, 1902) net
5
0
Galvanised Iron: its Manufacture and Uses. ByJ. Davies. 139 pp. 8vo. (1899) net
5
0
Management of Steel. By G. Ede. Seventhedition, 216 pp. crown 8vo. (1903)
5
0
Galvanising and Tinning, with a special Chapteron Tinning Grey Iron Castings. By W. T.Flanders. 8vo. (New York) net
8
6
Cupola Furnace. A practical treatise on theConstruction and Management of FoundryCupolas. By E. Kirk. Second edition, 78 illus.450 pp. demy 8vo. (New York, 1903) net
15
0
Practical Notes on Pipe Founding. By J. W.Macfarlane. 15 plates, 148 pp. 8vo.
12
6
Atlas of Designs concerning Blast FurnacePractice. By M. A. Pavloff. 127 plates, 14 in.by 10½ in. oblong, sewed. (1902) net
1
1
0
Album of Drawings relating to the Manufactureof Open Hearth Steel. By M. A. Pavloff. Part I. Open Hearth Furnaces. 52plates, 14 in. by 10½ in. oblong folio inportfolio. (1904) net
12
0
Modern Foundry Practice. Including revisedsubject matter and tables from Spretson’s“Casting and Founding.” By J. Sharp. Secondedition, 272 illus. 759 pp. 8vo. (1905) net
1
1
0
Roll Turning for Sections in Steel and Iron.By A. Spencer. Second edition, 78 plates, 4to.(1894)
1
10
0
METRIC TABLES.
French Measure and English Equivalents. By
J. Brook. Second edition, 80 pp. fcap. 32mo,
roan. (1906) net
1
0
A Dictionary of Metric and other useful Measures.
By L. Clark. 113 pp. 8vo. (1891)
6
0
English Weights, with their Equivalents in
kilogrammes per cent. By F. W. A. Logan.
96 pp. fcap. 32mo, roan. (1906)
net
1
0
Metric Weights with English Equivalents. By
H. P. McCartney. 84 pp. fcap. 32mo. (1907)
net
1
0
Metric Tables. By Sir G. L. Molesworth. Fourth
edition, 95 pp. royal 32mo. (1909)
net
2
0
Tables for Setting out Curves from 200 metres
to 4000 metres by tangential angles. By H.
Williamson. 4 illus. 60 pp. 18mo. (1908)
net
2
0
MINERALOGY AND MINING.
Rock Blasting. By G. G. Andre. 12 plates and56 illus. in text, 202 pp. 8vo. (1878)
5
0
Winding Plants for Great Depth. By H. C.Behr. In two parts. 8vo, sewed. (1902) net
2
2
0
Practical Treatise on Hydraulic Mining inCalifornia. By A. J. Bowie, Jun. Tenthedition, 73 illus. 313 pp. royal 8vo. (New York,1905) net
1
1
0
Manual of Assaying Gold, Silver, Copper andLead Ores. By W. L. Brown. Twelfth edition,132 illus. 589 pp. crown 8vo. (New York, 1907) net
10
6
Fire Assaying. By E. W. Buskett. 69 illus.105 pp. crown 8vo. (New York, 1907) net
4
6
Tin: Describing the Chief Methods of Mining, Dressing,etc. By A. G. Charleton. 15 plates, 83 pp.crown 8vo. (1884)
12
6
Gold Mining and Milling in Western Australia,with Notes upon Telluride Treatment, Costs andMining Practice in other Fields. By A. G.Charleton. 82 illus. and numerous plans andtables, 648 pp. super-royal 8vo. (1903) net
1
5
0
Miners’ Geology and Prospectors’ Guide. ByG. A. Corder. 29 plates, 224 pp. crown 8vo.(1907) net
5
0
Blasting of Rock in Mines, Quarries, Tunnels,etc. By A. W. and Z. W. Daw. Second edition,90 illus. 316 pp. demy 8vo. (1909) net
15
0
Handbook of Mineralogy; determination and descriptionof Minerals found in the United States.By J. C. Foye. 18mo, boards. (New York, 1886) net
2
0
Conversations on Mines. By W. Hopton. Ninthedition, 33 illus. 356 pp. crown 8vo. (1891)
4
6
Our Coal Resources at the End of the NineteenthCentury. By Prof. E. Hull. 157 pp. demy 8vo.(1897)
6
0
Simple Rules for the Discrimination of Gems.By T. S. G. Kirkpatrick. 16mo, leather. (1895)
2
0
Hydraulic Gold Miners’ Manual. By T. S. G.Kirkpatrick. Second edition, 12 illus. 46 pp.crown 8vo. (1897)
4
0
Economic Mining. By C. G. W. Lock. 175 illus.680 pp. 8vo. (1895) net
10
6
Gold Milling: Principles and Practice. By C. G. W.Lock. 200 illus. 850 pp. demy 8vo. (1901) net
1
1
0
Mining and Ore-Dressing Machinery. ByC. G. W. Lock. 639 illus. 466 pp. super-royal 4to.(1890)1
5
0
Miners’ Pocket Book. By C. G. W. Lock. Fifthedition, 233 illus. 624 pp. fcap. 8vo, roan, giltedges. (1908) net
10
6
Tests for Ores, Minerals and Metals of CommercialValue. By R. L. McMechen. 152 pp.12mo. (New York, 1907) net
5
6
Practical Handbook for the Working Minerand Prospector, and the Mining Investor. ByJ. A. Miller. 34 illus. 234 pp. crown 8vo.(1897)
7
6
Theory and Practice of Centrifugal VentilatingMachines. By D. Murgue. 7 illus. 81 pp. 8vo.(1883)
5
0
Examples of Coal Mining Plant. By J. Povey-Harper.Second edition, 40 plates, 26 in. by20 in. (1895) net
4
4
0
Examples of Coal Mining Plant, Second Series.By J. Povey-Harper. 10 plates, 26 in. by 20 in.(1902) net
1
12
6
ORGANISATION.
Accounts, Contracts and Management.
Organisation of Gold Mining Business, withSpecimens of the Departmental Report Booksand the Account Books. By Nicol Brown.Second edition, 220 pp. fcap. folio. (1903) net
1
5
0
Manual of Engineering Specifications and Contracts.By L. M. Haupt. Eighth edition, 338 pp.8vo. (New York, 1900) net
12
6
Depreciation of Factories, Mines, and IndustrialUndertakings, and their Valuation. By E.Matheson. Fourth edition in the Press.
Aid Book to Engineering Enterprise. By E.Matheson. Third edition, 916 pp. 8vo, buckram.(1898)1
4
0
Office Management. A handbook for Architectsand Civil Engineers. By W. Kaye Parry.New impression, 187 pp. medium 8vo. (1908) net
5
0
Commercial Organisation of Engineering Factories.By H. Spencer. 92 illus. 221 pp. 8vo.(1907) net
10
6
PHYSICS.
Colour, Heat and Experimental Science.
The Entropy Diagram and its Applications. ByM. J. Boulvin. 38 illus. 82 pp. demy 8vo. (1898)
5
0
Physical Problems and their Solution. By A.Bourgougnon. 224 pp. 18mo, boards. (NewYork, 1897) net
2
0
Heat for Engineers. By C. R. Darling, 110 illus.430 pp. 8vo. (1908) (Finsbury TechnicalManual) net
12
6
The Colourist. A method of determining colourharmony. By J. A. H. Hatt. 2 coloured plates,80 pp. 8vo. (New York, 1908) net
6
6
Engineering Thermodynamics. By C. F. Hirschfeld.22 illus. 157 pp. 18mo, boards. (New York,1907) net
2
0
Experimental Science: Elementary, Practical andExperimental Physics. By G. M. Hopkins.Twenty-third edition, 920 illus. 1100 pp. large 8vo.(New York, 1902) net
1
1
0
Reform in Chemical and Physical Calculations.By C. J. T. Hanssen. Demy 4to. (1897) net
6
6
Introduction to the Study of Colour Phenomena.By J. W. Lovibond. 10 hand coloured plates,48 pp. 8vo. (1905) net
5
0
Practical Laws and Data on the Condensationof Steam in Bare Pipes; to which is added aTranslation of Peclet’s Theory and Experimentson the Transmission of Heat through InsulatingMaterials. By C. P. Paulding. 184illus. 102 pp. demy 8vo. (New York, 1904) net
8
6
The Energy Chart. Practical application toreciprocating steam-engines. By Captain H. R.Sankey. 157 illus. 170 pp. 8vo. (1907) net
7
6
PRICE BOOKS.
Approximate Estimates. By T. E. Coleman.
Third edition, 481 pp. oblong 32mo, leather.
(1907)
net
5
0
Railway Stores Price Book. By W. O. Kempthorne.
500 pp. demy 8vo. (1909)
net
10
6
Spons’ Engineers’ Price Book. A Synopsis of
Current Prices and Rates for Engineering Materials
and Products. Edited by T. G. Marlow.
650 pp. folio. (1904)
net
7
6
Spons’ Architects’ and Builders’ Pocket Price-Book,
Memoranda, Tables and Prices. Edited
by Clyde Young. Revised by Stanford M.
Brooks. Illustrated, 552 pp. 16mo, leather cloth
(size 6½ in. by 3¾ in. by ½ in. thick). Issued
annually
net
3
0
RAILWAY ENGINEERING.
Railroad Curves and Earthwork. By C. F.Allen. Third edition, 4 plates, 198 pp. 12mo,leather, gilt edges. (New York, 1903) net
8
6
Field and Office Tables, specially applicable toRailroads. By C. F. Allen. 293 pp. 16mo,leather. (New York, 1903) net
8
6
The two above combined in one vol. limp leather net
12
6
Up-to-date Air Brake Catechism. By R. H.Blackall. Eighteenth edit. 5 coloured plates, 96illus. 305 pp. crown 8vo. (New York, 1903) net
8
6
Simple and Automatic Vacuum Brakes. By C.Briggs, G.N.R. 11 plates, 8vo. (1892)
4
0
Notes on Permanent-way Material, Plate-laying,and Points and Crossings. By W. H. Cole.Fifth edition, 32 plates, 176 pp. crown 8vo. (1905) net
7
6
Statistical Tables of the Working of Railwaysin various countries up to the year 1904. ByJ. D. Diacomidis. Second edition, 84 pp. smallfolio, sewed. (1906) net
16
0
Locomotive Breakdowns, Emergencies and theirRemedies. By Geo. L. Fowler, M.E. and W. W.Wood. Fifth edition, 92 illus. 266 pp. 12mo.(New York, 1908) net
4
6
Permanent-Way Diagrams. By F. H. Frere.Mounted on linen in cloth covers. (1908) net
3
0
Formulæ for Railway Crossings and Switches.By J. Glover. 9 illus. 28 pp. royal 32mo. (1896)
2
6
Setting out of Tube Railways. By G. M. Halden.9 plates, 46 illus. 68 pp. crown 4to. (1907) net
10
6
Railway Engineering, Mechanical and Electrical.By J. W. C. Haldane. 141 illus. 563 pp. 8vo.(1897)
15
0
Tables for setting-out Railway Curves. By C. P.Hogg. A series of cards in neat cloth case
4
6
The Construction of the Modern Locomotive.By G. Hughes. 300 illus. 261 pp. 8vo. (1894)
9
0
Practical Hints for Light Railways at Home andAbroad. By F. R. Johnson. 6 plates, 31 pp.crown 8vo. (1896)
2
6
Handbook on Railway Stores Management. ByW. O. Kempthorne. 268 pp. demy 8vo. (1907) net
10
6
Railway Stores Price Book. By W. O. Kempthorne.500 pp. demy 8vo. (1909) net
10
6
Tables for setting out Curves for Railways, Roads,Canals, etc. By A. Kennedy and R. W. Hackwood.32mo net
2
0
Railroad Location Surveys and Estimates. ByF. Lavis. 68 illus. 270 pp. 8vo. (New York, 1906) net
12
6
Tables for Computing the Contents of Earthworkin the Cuttings and Embankments ofRailways. By W. Macgregor. Royal 8vo
6
0
Bridge and Tunnel Centres. By J. B. McMasters.Illustrated, 106 pp. 18mo, boards. (New York,1893) net
2
0
Pioneering. By F. Shelford. Illustrated, 88 pp.crown 8vo. (1909) net
3
0
Handbook on Railway Surveying for Studentsand Junior Engineers. By B. Stewart. 55illus. 98 pp. crown 8vo. (1909) net
2
6
Spiral Tables. By J. G. Sullivan. 47 pp. 12mo,leather. (New York, 1908) net
6
6
Modern British Locomotives. By A. T. Taylor.100 diagrams of principal dimensions, 118 pp.oblong 8vo. (1907) net
4
6
Locomotive Slide Valve Setting. By C. E. Tully.Illustrated, 18mo net
1
0
The Walschaert Locomotive Valve Gear. ByW. W. Wood. 4 plates and set of movable cardboardworking models of the valves, 193 pp.crown 8vo. (New York, 1907) net
6
6
The Westinghouse E.T. Air-Brake InstructionPocket Book. By W. W. Wood. 48 illus.including many coloured plates, 242 pp. crown8vo. (New York, 1909) net
8
6
SANITATION, PUBLIC HEALTH AND MUNICIPAL ENGINEERING.
Sewers and Drains for Populous Districts. ByJ. W. Adams. Ninth edition, 81 illus. 236 pp.8vo. (New York, 1902) net
10
6
Public Abattoirs, their Planning, Design and Equipment.By R. S. Ayling. 33 plates, 100 pp.demy 4to. (1908) net
8
6
Sewage Purification. By E. Bailey-Denton. 8plates, 44 pp. 8vo. (1896)
5
0
Water Supply and Sewerage of Country Mansionsand Estates. By E. Bailey-Denton.76 pp. crown 8vo. (1901) net
2
6
Sewerage and Sewage Purification. By M. N.Baker. Second edition, 144 pp. 18mo, boards.(New York, 1905) net
2
0
Sewage Irrigation by Farmers. By R. W. P.Birch. 8vo, sewed. (1878)
2
6
Sanitary House Drainage, its Principles andPractice. By T. E. Coleman. 98 illus. 206 pp.crown 8vo. (1896)
6
0
Stable Sanitation and Construction. By T. E.Coleman. 183 illus. 226 pp. crown 8vo. (1897)
6
0
Public Institutions, their Engineering, Sanitary andother Appliances. By F. Colyer. 231 pp. 8vo.(1889) net
2
0
Discharge of Pipes and Culverts. By P. M.Crosthwaite. Large folding sheet in case net
2
6
A Complete and Practical Treatise on Plumbingand Sanitation: Hot Water Supply, Warmingand Ventilation, Steam Cooking, Gas,Electric Light, Bells, etc., with a completeSchedule of Prices of Plumber’s Work. ByG. B. Davis and F. Dye. 2 vols. 637 illus. and21 folding plates, 830 pp. 4to, cloth. (1899) net
1
10
0
Standard Practical Plumbing.By P. J. Davies.
Vol. I. Fourth edition, 768 illus. 355 pp. royal8vo. (1905) net
7
6
Vol. II. Second edition, 953 illus. 805 pp.(1905) net
10
6
Vol. III. 313 illus. 204 pp. (1905) net
5
0
Conservancy, or Dry Sanitation versus WaterCarriage. By J. Donkin. 7 plates, 33 pp. 8vo,sewed. (1906) net
1
0
House Drainage and Sanitary Plumbing. ByW. P. Gerhard. Tenth edition, 6 illus. 231 pp.18mo, boards. (New York, 1902) net
2
0
Engineering Work in Towns and Cities. ByE. McCulloch. 44 illus. 502 pp. crown 8vo.(New York, 1908) net
12
6
The Treatment of Septic Sewage. By G. W.Rafter. 137 pp. 18mo, boards. (New York,1904) net
2
0
Reports and Investigations on Sewer Air andSewer Ventilation. By R. H. Reeves. 8vo, sewed.(1894)
1
0
The Law and Practice of Paving Private StreetWorks. By W. Spinks. Fourth edition, 256 pp.8vo. (1904) net
Potable Water and Methods of Testing Impurities.By M. N. Baker. 97 pp. 18mo,boards. (New York, 1905) net
2
0
Manual of Hydrology. By N. Beardmore. Newimpression, 18 plates, 384 pp. 8vo. (1906) net
10
6
Boiler Waters, Scale, Corrosion and Fouling. ByW. W. Christie. 77 illus. 235 pp. 8vo, cloth.(New York, 1907) net
12
6
Water Softening and Purification. By H. Collet.Second edition, 6 illus. 170 pp. crown 8vo. (1908) net
5
0
Treatise on Water Supply, Drainage and SanitaryAppliances of Residences. By F. Colyer. 100pp. crown 8vo. (1899) net
1
6
Report on the Investigations into the Purificationof the Ohio River Water at Louisville,Kentucky. By G. W. Fuller. 8 plates, 4to,cloth. (New York, 1898)2
2
0
Purification of Public Water Supplies. By J. W.Hill. 314 pp. 8vo. (New York, 1898)
10
6
Well Boring for Water, Brine and Oil. By C. Isler.90 illus. 8vo, cloth net
10
0
Method of Measuring Liquids Flowing throughPipes by means of Meters of Small Calibre.By Prof. G. Lange. 1 plate, 16 pp. 8vo, sewed net
0
6
On Artificial Underground Water. By G.Richert. 16 illus. 33 pp. 8vo, sewed. (1900) net
1
6
Notes on Water Supply in new Countries. By F.W. Stone. 18 plates, 42 pp. crown 8vo. (1888)
5
0
The Principles of Waterworks Engineering.By J. H. T. Tudsbery and A. W. Brightmore.Third edition, 13 folding plates, 130 illus. 447 pp.demy 8vo. (1905) net
1
1
0
WORKSHOP PRACTICE.
A Handbook for Apprenticed Machinists. ByO. J. Beale. Second edition, 89 illus., 141 pp.16mo. (New York, 1901) net
2
6
Bicycle Repairing. By S. D. V. Burr. Sixthedition, 200 illus. 208 pp. 8vo. (New York, 1903) net
4
6
Practice of Hand Turning. By F. Campin.Third edition, 99 illus. 307 pp. crown 8vo. (1883)
3
6
Calculation of Change Wheels for Screw Cuttingon Lathes. By D. De Vries. 46 illus. 83 pp.8vo. (1908) net
3
0
Boiler Makers’ and Iron Shipbuilders’ Companion.By J. Foden. Fifth edition, 222 pp.fcap. 8vo. (1900)
5
0
French-Polishers’ Manual. By a French-Polisher.31 pp. royal 32mo, sewed. (1902) net
0
6
Art of Copper Smithing. By J. Fuller. Thirdedition, 475 illus. 325 pp. royal 8vo. (New York,1901) net
12
6
Saw Filing and Management of Saws. By R.Grimshaw. New edition, 81 illus. 16mo. (NewYork, 1906) net
3
6
Paint and Colour Mixing. By A. S. Jennings.Third edition. 13 coloured plates, 190 pp. 8vo.(1906) net
5
0
The Mechanician: a Treatise on the Constructionand Manipulation of Tools. By C. Knight.Fifth edition, 96 plates, 397 pp. 4to. (1897)
18
0
Turner’s and Fitter’s Pocket Book. By J. LaNicca. 18mo, sewed
0
6
Tables for Engineers and Mechanics, giving thevalues of the different trains of wheels required toproduce Screws of any pitch. By Lord Lindsay.Second edition, royal 8vo, oblong
2
0
Screw-cutting Tables. By W. A. Martin. Seventhedition, royal 8vo, oblong
1
0
Metal Plate Work, its Patterns and their Geometry,for the use of Tin, Iron and Zinc Plate Workers.By C. T. Millis. Fourth edition, 280 diagrams,470 pp. crown 8vo. (1906)
9
0
Engineers’ and General Smiths’ Work. Thesmith and forgeman’s handbook of practicalsmithing and forging. By T. Moore. 401 illus.248 pp. crown 8vo. (1906) net
5
0
Modern Machine Shop Construction, equipmentand management. By O. E. Perrigo. 208 illus.343 pp. crown 4to. (New York, 1906) net
21
0
Turner’s Handbook on Screw-cutting, Coning,etc. By W. Price. Fcap. 8vo
1
0
Introduction to Eccentric Spiral Turning. ByH. C. Robinson. 12 plates, 23 illus. 48 pp. 8vo.(1906) net
4
6
Manual of Instruction in Hard Soldering. ByH. Rowell. Fifth edition, 7 illus. 66 pp. crown8vo. (New York, 1905) net
3
0
Pocket Book on Boilermaking, Shipbuilding, andthe Steel and Iron Trades in General. By M. J.Sexton. Sixth edition, 85 illus. 319 pp. royal32mo, roan, gilt edges. (1903) net
5
0
Spons’ Mechanics’ Own Book: A Manual forHandicraftsmen and Amateurs. Sixth edition,1430 illus. 720 pp. demy 8vo. (1903)
6
0
Ditto ditto half morocco
7
6
Spons’ Workshop Receipts for Manufacturers,Mechanics and Scientific Amateurs. Newand thoroughly revised edition, crown 8vo.(1909)
Vol. I. Acetylene Lighting to Drying.223 illus. 532 pp net
3
0
Vol. II. Dyeing to Japanning. 259 illus.540 pp net
3
0
Vol. III. Jointing Pipes to Pumps. 500pp net
3
0
Vol. IV. In the Press.
Gauges at a Glance. By T. Taylor. Secondedition, post 8vo, oblong, with tape converter.(1900) net
5
0
The Modern Machinist. By J. T. Usher. Fifthedition. 257 illus. 322 pp. 8vo. (New York, 1904) net
10
6
American Tool Making and Interchangeable Manufacturing.By J. W. Woodworth. 600 illus.544 pp. demy 8vo. (New York, 1905) net
17
0
USEFUL TABLES.
Weights and Measurements of Sheet Lead.By J. Alexander. 32mo, roan net
1
6
Tables of Parabolic Curves for the use of RailwayEngineers and others. By G. T. Allen. Fcap.16mo
4
0
Barlow’s Tables of Squares, Cubes, Square Roots,Cube Roots and Reciprocals. Crown 8vo
6
0
Tables of Squares. By E. E. Buchanan. Ninthedition, 12mo net
4
6
Land Area Tables. By W. Codd. Square 16mo,on a sheet mounted on linen and bound in cloth
3
6
Description of the Amsler Planimeter. By W.Codd. (For use with “Land Area Tables.”) 12mo,sewed net
0
6
Tables for Setting out Curves from 101 to 5000feet radius. By H. A. Cutler and F. J. Edge.Royal 32mo net
2
6
Transition Curves. By W. G. Fox. 18mo, boards.(New York) net
2
0
Tables of some of the Principal Speeds occurringin Mechanical Engineering, expressed in Metresper second. By P. Keerayeff. 18mo, sewed
0
6
Calculating Scale. A Substitute for the Slide Rule.By W. Knowles. Crown 8vo, leather net
1
0
Planimeter Areas. Multipliers for various scales.By H. B. Molesworth. Folding sheet in clothcase net
1
0
Tables of Seamless Copper Tubes. By I. O’Toole.69 pp. oblong fcap. 8vo. (1908) net
3
6
Rownson’s Iron Merchants’ Tables and Memoranda,Weights and Measures. 86 pp. 32mo,leather
3
6
Spons’ Tables and Memoranda for Engineers.By J. T. Hurst, C.E. Twelfth edition, 278 pp.64mo, roan, gilt edges. (1907) net
1
0
Ditto ditto in celluloid case net
1
6
Optical Tables and Data, for the use of Opticians.By Prof. S. P. Thompson. Second edition, 130pp. oblong 8vo. (1907) net
6
0
Traverse Table, showing Latitudes and Departurefor each Quarter degree of the Quadrant, and fordistances from 1 to 100, etc.; 18mo, boards net
2
0
Fifty-four Hours’ Wages Calculator. By H. N.Whitelaw. Second edition, 8vo net
2
6
Practical Wood Carving. By C. J. Woodsend.108 illus. 86 pp. 8vo. (New York, 1897) net
4
6
Wheel Gearing. Tables of Pitch Line Diameters,etc. By A. Wildgoose and A. J. Orr. 175 pp.fcap. 32mo. (1903) net
2
0
MISCELLANEOUS.
Time Chart. The time of day at any place in theWorld at a glance. By Dr. F. J. B. Cordiero.On card net
1
0
Model Steam Engine Design. By R. M. DeVignier. 34 illus. 94 pp. crown 8vo, limp. (NewYork, 1907) net
1
6
Popular Engineering. By F. Dye. 704 illus. 477pp. crown 4to. (1895) net
5
0
The Phonograph, and how to construct it. ByW. Gillett. 6 folding plates, 87 pp. crown 8vo.(1892)
5
0
Particulars of Dry Docks, Wet Docks, Wharves,etc. on the River Thames. By C. N. Jordan.Second edition, 7 coloured charts, 103 pp. oblong8vo. (1904) net
2
6
Flight-Velocity. By A. Samuelson. 4 plates, 42pp. 8vo, sewed. (1906) net
2
0
Resistance of Air and the Question of Flying.By A. Samuelson. 23 illus. 36 pp. 8vo, sewed.(1905) net
2
0
Spons’ Engineer’s Diary and Year Book, issuedannually. 4to
3
6
New Theories in Astronomy. By W. Stirling.335 pp. demy 8vo. (1906) net
8
6
The American Hardware Store. A Manual ofapproved methods of arranging and displayinghardware. By R. R. Williams. 500 illus.448 pp. royal 8vo. (New York, 1896) net
7
6
Inventions, How to Protect, Sell and Buy Them.By F. Wright. Crown 8vo, limp. (New York,1908) net
1
6
SCIENCE ABSTRACTS
SECTION A.—PHYSICS. SECTION B.—ENGINEERING. ISSUED MONTHLY BY THE INSTITUTION OF ELECTRICAL ENGINEERS, WITH THE CO-OPERATION OF The Physical Society of London, The American Physical Society, The American Institute of Electrical Engineers, and The American Electro-Chemical Society.
Section A.—PHYSICS.
Annual Subscription, 18s.net, post-free.
Contents:—General Physics—Light—Heat—Electricity and Magnetism—Chemical Physics and Electro-Chemistry.
During 1907 and 1908 over 4200 Abstracts and References were included under the above headings.
Section B.—ELECTRICAL ENGINEERING.
Annual Subscription, 18s.net, post-free.
Contents:—Steam Plant, Gas and Oil Engines—Industrial Electro-Chemistry, General Electrical Engineering, and Properties and Treatment of Materials—Generators, Motors and Transformers—Electrical Distribution, Traction and Lighting—Telegraphy and Telephony.
During 1907 and 1908 over 2800 Abstracts and References were included under the above headings.
Annual Subscription for Both Sections, 30s.net, post-free.
E. & F. N. SPON, Ltd., 57 Haymarket, London, S.W.
The Journal of the Iron and Steel Institute. Edited by G. C. Lloyd, Secretary.
Published Half-yearly, 8vo, cloth, 16s.
The Journal of the Institution of Electrical Engineers. Edited by P. F. Rowell, Secretary.
The Proceedings of the Incorporated Association of Municipal and County Engineers. Edited by Thomas Cole, Assoc. M. Inst. C.E.
Published Annually, 8vo, cloth, 21s.
The Transactions of the Institution of Mining and Metallurgy. Edited by C. McDermid, Secretary.
Published Annually, boards, 21s. net, or half-bound, 25s. net.
Transactions of the Institution of Gas Engineers. Edited by Walter T. Dunn, Secretary.
Published Annually, 8vo, cloth, 10s. 6d. net.
Proceedings of the International Association for Testing Materials.
E. & F. N. SPON, Ltd., 57 Haymarket, London, S.W.
LONDON: PRINTED BY WILLIAM CLOWES AND SONS, LIMITED.
Transcriber’s notes:
In the text version, italics are represented by _underscores_, and bold and black letter text by =equals= symbols. Superscripts are represented by ^{} and subscripts by _{}
Missing or incorrect punctuation has been repaired.
The following mistakes have been noted:
p. 15. Tranmission has been changed to Transmission.
p. 27. Assuan has been changed to Assuân to match all other instances.
p. 50. urner's has been changed to Turner's after checking the book's
authorship.
