ENGLISH-FRENCH AND FRENCH-ENGLISH DICTIONARY OF THE MOTOR CAR, CYCLE AND BOAT
FREDERICK LUCAS
ENGLISH-FRENCH AND FRENCH-ENGLISH
DICTIONARY OF THE MOTOR CAR, CYCLE, AND BOAT
BY FREDERICK LUCAS
NEW IMPRESSION
London E. & F. N. SPON, Limited, 67 HAYMARKET
New York SPON & CHAMBERLAIN, 123 LIBERTY STREET
1915
ALL RIGHTS RESERVED
PREFACE
The object of this work is to assist those interested in the motor industry and pastime to read the foreign technical literature devoted to the subject. I have translated into the respective languages the technical terms used in the various journals and the catalogues of the leading English and French makers. The work embodies all the component parts of the vehicles and machinery at present on the market, and should therefore be of service to the user, the manufacturer, and the patent agent.
The technical terms which are peculiar to cycles are printed in italics.
Engineering Work in Public Buildings. By R. O. Allsop. 77 illus. 168 pp. demy 4to. (1912)
net
12
6
The Hydropathic Establishment and its Baths. By R. O. Allsop. 8 plates, 107 pp. demy 8vo. (1891)
5
0
The Turkish Bath, its Design and Construction. By R. O. Allsop. 27 illus. 152 pp. demy 8vo. (1890)
6
0
Public Abattoirs, their Planning, Design and Equipment. By R. S. Ayling. 33 plates, 100 pp. demy 4to. (1908)
net
8
6
The Builder's Clerk. By T. Bales. Second edition, 92 pp. fcap. 8vo. (1904)
1
6
Glossary of Technical Terms used in Architecture and the Building Trades. By G. J. Burns. 136 pp. crown 8vo. (1895)
3
6
Chimney Design and Theory. By W. W. Christie. Second edition, 54 illus. 200 pp. crown 8vo. (New York, 1902)
net
12
6
Approximate Estimates. By T. E. Coleman. Third ed. 481 pp. ob. 32mo, leather. (1907)
net
5
0
Stable Sanitation and Construction. By T. E. Coleman. 183 illus. 226 pp. crown 8vo. (1897)
6
0
House Plans and Building Construction for General Contractors and House Builders. By M. M. Dustman. 511 illus. 239 pp. oblong folio. (New York, 1912)
net
8
6
Architectural Examples in Brick, Stone, Wood and Iron. By W. Fullerton. Third edition 245 plates, 254 pp. demy 4to. (1908)
net
15
0
Bricklaying System. By F. B. Gilbreth. 240 illus. 321 pp. 8vo. (New York, 1909)
net
12
6
Field System. By F. B. Gilbreth. 194 pp. 12mo. leather. (New York, 1908)
net
12
6
The Building Trades Pocket Book. Compiled by R. Hall. 12mo. With diary
net
1
0
The Economics of Contracting. By D. J. Hauer. 10 illus. viii. + 269 pp. crown 8vo. (New York, 1911)
net
12
0
The Clerk of Works' Vade Mecum. By G. G. Hoskins. Seventh edition, 52 pp. fcap. 8vo. (1901)
1
6
Paint and Colour Mixing. By A. S. Jennings. Fourth ed. 14 col. plates, 190 pp. 8vo. (1910)
net
5
0
A Handbook of Formulæ, Tables, and Memoranda for Architectural Surveyors. By J. T. Hurst. Fifteenth edition, 512 pp. royal 32mo, roan. (1905)
net
5
0
Quantity Surveying. By J. Leaning. Fifth ed. new impression, 936 pp. 8vo. (1912)
net
1
5
0
Builders' Quantities. By H. M. Lewis. 6 illus. 44 pp. cr. 8vo. (S. & C. Series No. 40.) (1911)
net
1
6
Obstruction to Light. A Graphic Method of determining Problems of Ancient Lights. By H. B. Molesworth. 9 folding plates, 4to. (1902)
net
6
0
Suburban Houses. A series of practical plans. By J. H. Pearson. 46 plates and 12 pp. text, crown 4to. (1905)
net
7
6
Solid Bitumens, their Physical and Chemical Properties. By S. F. Peckham. 23 illus. 324 pp. 8vo. (New York, 1909)
1
1
0
Roman Architecture, Sculpture and Ornament. By G. B. Piranesi. 200 plates, reproduced in facsimile from the original. 2 vols. imperial folio, in wrappers. (1900)
net
2
2
0
The Seven Periods of English Architecture, defined and illustrated. By E. Sharpe. Third edition, 20 steel plates, royal 8vo. (1888)
12
6
Our Factories, Workshops and Warehouses, their Sanitary and Fire-Resisting Arrangements. By B. H. Thwaite. 183 ill. 282 pp. cr. 8vo. (1882)
9
0
Elementary Principles of Carpentry. By T. Tredgold and J. T. Hurst. Eleventh edition, 48 plates, 517 pp. crown 8vo. (1904)
12
6
Treatise on the Design and Construction of Mill Buildings. By W. G. Tyrrell. 652 illus. 490 pp. demy 8vo. (New York, 1911)
net
17
0
Practical Stair Building and Handrailing. By W. H. Wood. 32 plates, 91 pp. crown 4to. (1894)
10
6
Spons' Architects' and Builders' Pocket Price-Book, Memoranda, Tables and Prices. Edited by Clyde Young. Revised by Stanford M. Brooks. 16mo, leather cloth (size 6½ in. by 3¾ in. by ½ in. thick). Issued annually in two Sections.
Prices and Diary, in green cover, 239 pp. with Diary showing a week at an opening
net
2
6
Memoranda and Tables, in red cover. Illustrated, 372 pp.
Strains in Ironwork. By Henry Adams. Fourth edition, 8 plates, 65 pp. crown 8vo. (1904)
5
0
Designing Ironwork. By Henry Adams. Second series. 8vo, sewed.
Part I. A Steel Box Girder. (1894)
net
0
9
„ II. Built-up Steel Stanchions. (1901)
net
1
3
„ III. Cisterns and Tanks. (1902)
net
1
0
„ IV. A Fireproof Floor. (1903)
net
1
0
Columns and Struts. Theory and Design. By Wm. Alexander. 101 illus. xii + 265 pp. demy 8vo. (1912)
net
10
6
A Practical Treatise on Segmental and Elliptical Oblique or Skew Arches. By G. J. Bell. Second edition, 17 plates, 125 pp. royal 8vo. (1906)
net
1
1
0
Economics of Construction in relation to Framed Structures. By R. H. Bow. Third thousand, 16 plates, 88 pp. 8vo. (1873)
5
0
Theory of Voussoir Arches. By Prof. W. Cain. Third edition, 201 pp. 18mo, boards. (New York, 1905)
net
2
0
New Formulæ for the Loads and Deflections of Solid Beams and Girders. By W. Donaldson. Second edition, 8vo. (1872)
4
6
Plate Girder Railway Bridges. By M. Fitzmaurice. 4 plates, 104 pp. 8vo. (1895)
6
0
Pocket Book of Calculations in Stresses. By E. M. George. 66 illus. 140 pp. royal 32mo, half roan. (1895)
3
6
Strains on Braced Iron Arches and Arched Iron Bridges. By A. S. Heaford. 39 pp. 8vo. (1883)
6
0
Tables for Roof Framing. By G. D. Inskip. Second edition, 451 pp. 8vo, leather. (New York, 1905)
net
12
6
Stresses in Girder and Roof Frames, for both dead and live loads, by simple Multiplication, etc. By F. R. Johnson. 28 plates, 215 pp. crown 8vo. (1894)
6
0
A Graphical Method for Swing Bridges. By B. F. La Rue. 4 plates, 104 pp. 18mo, boards. (New York, 1892)
net
2
0
Bridge and Tunnel Centres. By J. B. McMasters. Illustrated, 106 pp. 18mo, boards. (New York, 1893)
net
2
0
Notes on Cylinder Bridge Piers and the Well System of Foundations. By J. Newman. 144 pp. 8vo. (1893)
6
0
Calculation of Columns. By T. Nielsen. 4 plates, 36 pp. 8vo. cloth. (1911)
net
4
6
A New Method of Graphic Statics applied in the Construction of Wrought Iron Girders. By E. Olander. 16 plates, small folio. (1887)
10
6
Steel Bar and Plate Tables. Giving Weight of a Lineal Foot of all sizes of L and T Bars, Flat Bars, Plates, Square and Round Bars. By E. Read. On large folding card. (1911)
net
1
0
Reference Book for Statical Calculations. By F. Ruff. With diagrams, 140 pp. crown 8vo. (1906)
net
5
0
Suspension Bridges and Cantilevers. By D. B. Steinmann. vii. + 185 pp. 18mo, boards. (Van Nostrand Series, No. 127.) (New York, 1911)
net
2
0
The Strength and Proportion of Riveted Joints. By B. B. Stoney. 87 pp. 8vo. (1885)
5
0
The Anatomy of Bridgework. By W. H. Thorpe. 103 illus. 190 pp. crown 8vo. (1906)
Portland Cement: its Manufacture, Testing and Use, By D. B. Butler. Second edition, 97 illus. 396 pp. demy 8vo. (1905)
net
16
0
Theory of Steel-Concrete Arches and of Vaulted Structures. By W. Cain. Fourth edition, 27 illus. 212 pp. 18mo, boards. (New York, 1906)
net
2
0
Reinforced Concrete Construction. Elementary Course. By M. T. Cantell. 65 illus. 135 pp. crown 8vo. (1911.)
net
4
6
Reinforced Concrete Construction. Advanced Course. By M. T. Cantell. 242 illus. xvi + 240 pp. super-royal 8vo. (1912)
net
12
6
Graphical Reinforced Concrete Design. A series of Diagrams on sheets (measuring 17½ in. by 22½ in.) for Designing and Checking. With 48-page pamphlet. By J. A. Davenport. Complete in roll. (1911)
net
5
0
Cement Users' and Buyers' Guide. By Calcare. 115 pp. 32mo, cloth. (1901)
net
1
6
Diagrams for Designing Reinforced Concrete Structures. By G. F. Dodge. 31 illus. 104 pp. oblong folio. (New York, 1910)
net
17
0
Cements, Mortars, and Concretes; their Physical properties. By M. S. Falk. 78 illus. 176 pp. 8vo. (New York, 1904)
net
10
6
Concrete Construction, Methods and Cost. By H. P. Gillette and C. S. Hill. 310 illus. 690 pp. 8vo. (New York, 1908)
net
1
1
0
Engineers' Pocket-Book of Reinforced Concrete. By E. L. Heidenreich. 164 illus. 364 pp. crown 8vo, leather, gilt edges. (New York, 1909)
net
12
6
Concrete Inspection. By C. S. Hill. 15 illus. 179 pp. 12mo. (New York, 1909)
net
4
6
Practical Silo Construction. By A. A. Houghton. 18 illus. 69 pp. crown 8vo. (S. & C. Series, No. 27.) (New York, 1911)
net
1
6
Molding Concrete Chimneys, Slate and Roof Tiles. By A. A. Houghton. 15 illus. 61 pp. crown 8vo. (S. & C. Series, No. 28.) (New York, 1911)
net
1
6
Molding and Curing Ornamental Concrete. By A. A. Houghton. 5 illus. 58 pp. crown 8vo. (S. & C. Series, No. 29.) (New York, 1911)
net
1
6
Concrete Monuments, Mausoleums and Burial Vaults. By A. A. Houghton. 18 illus. 65 pp. crown 8vo. (S. & C. Series, No. 31.) (New York, 1911)
net
1
6
Concrete Floors and Sidewalks. By A. A. Houghton. 8 illus. 63 pp. crown 8vo. (S. & C. Series, No. 32.) (New York, 1911)
net
1
6
Molding Concrete Baths, Tubs, Aquariums and Natatoriums. By A. A. Houghton. 16 illus. 64 pp. crown 8vo. (S. & C. Series, No. 33.) (New York, 1911)
net
1
6
Concrete Bridges, Culverts and Sewers. By A. A. Houghton. 14 illus. 58 pp. crown 8vo. (S. & C. Series, No. 34.) (New York, 1912)
net
1
6
Constructing Concrete Porches. By A. A. Houghton. 18 illus. 62 pp. crown 8vo. (S. & C. Series, No. 35.)
net
1
6
Molding Concrete Flower-Pots, Boxes, Jardinières, etc. By A. A. Houghton. 8 illus. 52 pp. crown 8vo. (S. & C. Series, No. 36.) (New York, 1912)
net
1
6
Molding Concrete Fountains and Lawn Ornaments. By A. A. Houghton. 14 illus. 56 pp. crown 8vo. (S. & C. Series, No. 37). (New York, 1912)
net
1
6
Reinforced Concrete. By E. McCulloch. 28 illus. 128 pp. crown 8vo. (New York, 1908)
net
6
6
Concrete and Reinforced Concrete. By H. A. Reid. 715 illus. 884 pp. royal 8vo. (New York, 1907)
net
21
0
Theory and Design of Reinforced Concrete Arches. By A. Reuterdahl. 41 illus. 126 pp. 8vo. (New York, 1908)
net
8
6
Specification for Concrete Flags. Issued by the Institution of Municipal and County Engineers. Folio, sewed. (1911)
net
2
6
Practical Cement Testing. By W. P. Taylor. With 142 illus. 329 pp. demy 8vo. (New York, 1906)
net
12
6
Concrete Bridges and Culverts. By H. G. Tyrrell. 66 illus. 251 pp. cr. 8vo, leather.
Practical Hints to Young Engineers Employed on Indian Railways. By A. W. C. Addis. With 14 illus. 154 pp. 12mo. (1910)
net
3
6
Levelling, Barometric, Trigonometric and Spirit. By I. O. Baker. Second edition, 15 illus. 145 pp. 18mo, boards. (New York, 1903)
net
2
0
Punjab Rivers and Works. By E. S. Bellasis. 47 illus. 85 pp. folio, cloth. (1911)
net
8
0
Notes on Instruments best suited for Engineering Field Work in India and the Colonies. By W. G. Bligh. 65 illus. 218 pp. 8vo. (1899)
7
6
Practical Designing of Retaining Walls. By Prof. W. Cain. Fifth edition, 14 illus. 172 pp. 18mo, boards. (New York, 1908)
net
2
0
Land Area Tables. By W. Codd. Sheet mounted on linen, in cloth case, with explanatory booklet
3
6
The Maintenance of Macadamised Roads. By T. Codrington. Second ed., 186 pp. 8vo. (1892)
7
6
The Civil Engineers' Cost Book. By Major T. E. Coleman, R.E. xii. + 289 pp. Pocket size (6½ in. × 3⅝ in.), leather cloth. (1912)
net
5
0
Retaining Walls in Theory and Practice. By T. E. Coleman. 104 ill. 160 pp. cr. 8vo. (1909)
net
5
0
On Curved Masonry Dams. By W. B. Coventry. 8vo, sewed. (1894)
2
0
A Practical Method of Determining the Profile of a Masonry Dam. By W. B. Coventry. 8vo, sewed. (1894)
2
6
The Stresses on Masonry Dams (oblique sections). By W. B. Coventry. 8vo, sewed. (1894)
2
0
Handbook of Cost Data for Contractors and Engineers. By H. P. Gillette. 1854 pp. crown 8vo, leather, gilt edges. (New York, 1910)
net
1
1
0
Rock Excavation, Methods and Cost. By H. P. Gillette. New edition in preparation.
High Masonry Dams. By E. S. Gould. With illus. 88 pp. 18mo, boards. (New York, 1897)
net
2
0
Railway Tunnelling in Heavy Ground. By C. Gripper. 3 plates, 66 pp. royal 8vo. (1879)
7
6
Levelling and its General Application. By T. Holloway. (Third edition in preparation)
Waterways and Water Transport. By J. S. Jeans. 55 illus. 520 pp. 8vo. (1890)
net
9
0
Table of Barometrical Heights to 20,000 Feet. By Lt.-Col. W. H. Mackesy. 1 plate, 24 pp. royal 32mo. (1882)
3
0
Aid Book to Engineering Enterprise. By E. Matheson. Third edition, illustrated, 916 pp. medium 8vo, buckram. (1898)
1
4
0
A Treatise on Surveying. By R. E. Middleton and O. Chadwick. Third edition, royal 8vo. (1911)
Part I. 11 plates 162 illus. 285 pp.
10
6
„ II. 152 illus. and 2 plates, 340 pp.
10
6
A Pocket Book of Useful Formulæ and Memoranda, for Civil and Mechanical Engineers. By Sir G. L. Molesworth and H. B. Molesworth. With an Electrical Supplement by W. H. Molesworth. Twenty-sixth edition, 760 illus. 901 pp. royal 32mo, French morocco, gilt edges. (1908)
net
5
0
The Pocket Books of Sir G. L. Molesworth and J. T. Hurst, printed on India paper and bound in one vol. Royal 32mo, russia, gilt edges
net
10
6
Metallic Structures: Corrosion and Fouling and their Prevention. By J. Newman. Illustrated, 385 pp. crown 8vo. (1896)
9
0
Scamping Tricks and Odd Knowledge occasionally practised upon Public Works. By J. Newman. New imp., 129 pp. cr. 8vo. (1908)
net
2
0
Co-ordinate Geometry applied to Land Surveying. By W. Pilkington. 5 illus. 44 pp. 12mo. (1909)
net
1
6
Pioneering. By F. Shelford. Illustrated, 88 pp. crown 8vo. (1909)
net
3
0
Topographical Surveying. By G. J. Specht. Second edition, 2 plates and 28 illus. 210 pp. 18mo, boards. (New York, 1898)
net
2
0
Spons' Dictionary of Engineering, Civil, Mechanical, Military and Naval. 10,000 illus. 4300 pp. super royal 8vo. (1874, Supplement issued in 1881).
Complete, in 4 vols.
net
3
3
0
Surveying and Levelling Instruments. By W. F. Stanley. (Fourth edition in preparation)
Surveyor's Handbook. By T. U. Taylor. 116 illus. 310 pp. crown 8vo, leather, gilt edges. (New York, 1908)
net
8
6
Logarithmic Land Measurement. By J. Wallace. 32 pp. royal 8vo. (1910)
net
5
0
The Drainage of Fens and Low Lands by Gravitation and Steam Power. By W. H. Wheeler. 8 plates, 175 pp. 8vo. (1888)
12
6
Stadia Surveying, the theory of Stadia Measurements. By A. Winslow. Fifth edition, 148 pp. 18mo, boards. (New York, 1902)
net
2
0
Handbook on Tacheometrical Surveying. By C. Xydis. 55 illus. 3 plates, 63 pp. 8vo. (1909)
Food Adulteration and its Detection. By J. P. Battershall. 12 plates, 328 pp. demy 8vo. (New York, 1887)
15
0
Practical Hints on Taking a House. By H. P. Boulnois. 71 pp. 18mo. (1885)
1
6
The Cooking Range, its Failings and Remedies. By F. Dye. 52 pp. fcap. 8vo, sewed. (1888)
0
6
Spices and How to Know Them. By W. M. Gibbs. With 47 plates, including 14 in colours, 179 pp. 8vo. (New York, 1909)
net
15
0
The Kitchen Boiler and Water Pipes. By H. Grimshaw. 8vo, sewed. (1887)
net
1
0
Cookery and Domestic Management, including economic and middle class Practical Cookery. By K. Mellish. 56 coloured plates and 441 illus. 987 pp. super-royal 8vo. (1901)
net
16
0
Spons' Household Manual. 250 illus. 1043 pp. demy 8vo. (1902)
Practical Electric Bell Fitting. By F. C. Allsop. Tenth edition, 186 illus. including 8 folding plates, 185 pp. crown 8vo. (1903)
3
6
Telephones: their Construction and Fitting. By F. C. Allsop. Eighth edition, new impression, 184 illus. 222 pp. crown 8vo. (1912)
net
3
6
Auto-Transformer Design. By A. H. Avery. 25 illus. 60 pp. 8vo. (1909)
net
3
6
Principles of Electric Power (Continuous Current) for Mechanical Engineers. By A. H. Bate. 63 illus. 204 pp. crown 8vo. (1905) (Finsbury Technical Manual)
net
4
6
Practical Construction of Electric Tramways. By W. R. Bowker. 93 illus. 119 pp. 8vo. (1903)
net
6
0
The Electric Motor and its Practical Operation. By E. E. Burns. 78 illus. vi + 91 pp. crown 8vo. (New York, 1912)
net
7
0
Electrical Ignition for Internal Combustion Engines. By M. A. Codd. 109 illus. 163 pp. crown 8vo. (1911)
net
3
0
Design and Construction of Induction Coils. By A. F. Collins. 155 illus. 272 pp. demy 8vo. (New York, 1909)
net
12
6
Plans and Specification for Wireless Telegraph Sets. By A. F. Collins. Crown 8vo. (S. & C. Series, Nos. 41 and 42). (New York, 1912)
each net
1
6
Part I. An Experimental Set and a One to Five Miles Set. 37 illus. viii + 45 pp.
Part II. A Five to Ten Mile Set and a Ten to Twenty Mile Set. 63 illus. viii + 72 pp.
Switchboard Measuring Instruments for Continuous and Polyphase Currents. By J. C. Connan. 117 illus. 150 pp. 8vo. (1908)
net
5
0
Electric Cables, their Construction and Cost. By D. Coyle and F. J. O. Howe. With many diagrams and 216 tables, 466 pp. crown 8vo, leather. (1909)
net
15
0
Management of Electrical Machinery. By F. B. Crocker and S. S. Wheeler. Eighth edition, 131 illus. 223 pp. crown 8vo. (New York, 1909)
net
4
6
Electric Lighting: A Practical Exposition of the Art. By F. B. Crocker. Royal 8vo. (New York.)
Vol. I. The Generating Plant. Sixth edition, 213 illus. 470 pp. (1904)
net
12
6
Vol. II. Distributing Systems and Lamps. Second edition, 391 illus. 505 pp. (1905)
net
12
6
The Care and Management of Ignition Accumulators. By H. H. U. Cross. 12 illus. 74 pp. crown 8vo. (S. & C. Series, No. 19.) (1910)
net
1
6
Elements of Telephony. By A. Crotch. 51 illus. 90 pp. cr. 8vo. (S. & C. Series, No. 21.) (1911)
net
1
6
Elementary Telegraphy and Telephony. By Arthur Crotch. New impression, 238 illus. viii + 223 pp. 8vo. (Finsbury Technical Manual.) (1912)
net
4
6
Electricity and Magnetism in Telephone Maintenance. By G. W. Cummings. 45 illus. 137 pp. 8vo. (New York, 1908)
net
6
6
Grouping of Electric Cells. By W. F. Dunton. 4 illus. 50 pp. fcap. 8vo. (1906)
net
1
6
Wireless Telegraphy for Intending Operators. By C. K. P. Eden. 20 illus. 80 pp. crown 8vo. (S. & C. Series, No. 24.) In preparation.
Magnets and Electric Currents. By Prof. J. A. Fleming. Second edition, 136 illus. 417 pp. crown 8vo. (1902)
net
5
0
Notes on Design of Small Dynamo. By George Halliday. Second edition, 8 plates, 8vo. (1895)
2
6
Practical Alternating Currents and Power Transmission. By N. Harrison. 172 illus. 375 pp. crown 8vo. (New York, 1906)
net
10
6
Making Wireless Outfits. By N. Harrison. 27 illus. 61 pp. crown 8vo. (S. & C. Series, No. 11.) (New York, 1909)
net
1
6
Wireless Telephone Construction. By N. Harrison. 43 illus. 73 pp. crown 8vo. (S. & C. Series, No. 12.) (New York, 1909)
net
1
6
Testing Telegraph Cables. By Colonel V. Hoskiœr. Third edition, 11 illus. viii + 75 pp. crown 8vo. (1889)
4
6
Long Distance Electric Power Transmission. By R. W. Hutchinson. 136 illus. 345 pp. crown 8vo. (New York, 1907)
net
12
6
Theory and Practice of Electric Wiring. By W. S. Ibbetson. 119 ill. 366 pp. cr. 8vo. (1909)
net
5
0
Practical Electrical Engineering for Elementary Students. By W. S. Ibbetson. 61 illus. 155 pp. crown 8vo. (1910)
net
3
6
Form of Model General Conditions recommended by The Institution of Electrical Engineers for use in connection with Electrical Contracts. New edition in preparation.
Telegraphy for Beginners. By W. H. Jones. 19 illus. 58 pp. crown 8vo. (New York, 1910)
net
2
0
A Handbook of Electrical Testing. By H. R. Kempe. Seventh edition, 285 illus. 706 pp. demy 8vo. (1908)
net
18
0
Electromagnets, their design and construction. By A. N. Mansfield. 36 illus. 155 pp. 18mo, boards. (New York, 1901)
net
2
0
Telephone Construction, Methods and Cost. By C. Mayer. With Appendices on the cost of materials and labour by J. C. Slippy. 103 illus. 284 pp. crown 8vo. (New York, 1908)
net
12
6
Storage Batteries, Stationary and Portable. By J. P. Niblett. 22 illus. 80 pp. crown 8vo. (New York, 1911)
net
2
6
House Wiring. By T. W. Poppe. 73 illus. 103 pp. 12mo, limp. (New York, 1912)
net
3
0
Practical Electrics: a Universal Handybook on Every Day Electrical Matters. Seventh edition, 126 illus. 135 pp. 8vo. (S. & C. Series, No. 13.) (New York, 1902)
net
1
6
Electroplating. By H. C. Reetz. 62 illus. 99 pp. crown 8vo. (New York, 1911)
net
2
0
Wiring Houses for the Electric Light. By N. H. Schneider. 40 illus. 85 pp. crown 8vo. (S. & C. Series, No. 25.) (New York, 1911)
net
1
6
Induction Coils. By N. H. Schneider. Second edition, 79 illus. 285 pp. crown 8vo. (New York, 1901)
net
4
6
Electric Gas Lighting. By N. H. Schneider. 57 illus. 101 pp. cr. 8vo. (S. & C. Series, No. 8). (New York, 1901)
net
1
6
How to Install Electric Bells, Annunciators and Alarms. By N. H. Schneider. 59 illus. 63 pp. crown 8vo, limp. (S. & C. Series, No. 2.) (New York, 1905)
net
1
6
Modern Primary Batteries, their construction, use and maintenance. By N. H. Schneider. 54 illus. 94 pp. crown 8vo. (S. & C. Series, No. 1.) (New York, 1905)
net
1
6
Practical Engineers' Handbook on the Care and Management of Electric Power Plants. By N. H. Schneider. 203 illus. 274 pp. crown 8vo. (New York, 1906)
net
5
0
Electrical Circuits and Diagrams, illustrated and explained. By N. H. Schneider. 8vo. (S. & C. Series, Nos. 3 and 4.) (New York)
No. 3, Part 1. New edition in preparation.
No. 4, Part 2. 73 pp. (1909)
net
1
6
Electrical Instruments and Testing. By N. H. Schneider. Third edition. 133 illus. 239 pp. crown 8vo. (New York, 1907)
net
4
6
Experimenting with Induction Coils. By N. H. Schneider. 26 illus. 73 pp. crown 8vo. (S. & C. Series, No. 5.) (New York, 1906)
net
1
6
Study of Electricity for Beginners. By N. H. Schneider. 54 illus. 88 pp. crown 8vo. (S. & C. Series, No. 6.) (New York, 1905)
net
1
6
Wiring Houses for the Electric Light: Low Voltage Battery Systems. 44 illus. 86 pp. crown 8vo. (S. & C. Series, No. 25.) (New York, 1911)
net
1
6
Low Voltage Electric Lighting with the Storage Battery. By N. H. Schneider. 23 illus. 85 pp. crown 8vo. (S. & C. Series, No. 26.) (New York, 1911)
net
1
6
Dry Batteries: how to Make and Use them. By a Dry Battery Expert. With additional notes by N. H. Schneider. 30 illus. 59 pp. crown 8vo. (S. & C. Series, No. 7.) (New York, 1905)
net
1
6
The Diseases of Electrical Machinery. By E. Schulz. Edited, with a Preface, by Prof. S. P. Thompson. 42 illus. 84 pp. crown 8vo
net
2
0
Electricity Simplified. By T. O. Sloane. Tenth edition, 29 illus. 158 pp. crown 8vo. (New York, 1901)
net
4
6
How to become a Successful Electrician. By T. O. Sloane. Third edition, 4 illus. 202 pp. crown 8vo. (New York, 1899)
net
4
6
Electricity: its Theory, Sources and Applications. By J. T. Sprague. Third edition, 109 illus. 658 pp. crown 8vo (1892)
net
7
6
Telegraphic Connections. By C. Thom and W. H. Jones. 20 plates, 59 pp. oblong 8vo. (New York, 1892)
net
3
6
Dynamo Electric Machinery. By Prof. S. P. Thompson. Seventh edition, demy 8vo. (Finsbury Technical Manual.)
Vol. I. Continuous-Current Machinery. With 4 coloured and 30 folding plates, 573 illus. 984 pp. (1904)
net
1
10
0
Vol. II. Alternating Current Machinery. 15 coloured and 24 folding plates, 546 illus. 900 pp. (1905)
net
1
10
0
Design of Dynamos (Continuous Currents). By Prof. S. P. Thompson. 4 coloured and 8 folding plates, 243 pp. demy 8vo. (1903)
net
12
0
Schedule for Dynamo Design, issued with the above. 6d. each, 4s. per doz., or 18s. per 100
net
Curves of Magnetic Data for Various Materials. A reprint on transparent paper for office use of Plate I from Dynamo Electric Machinery, and measuring 25 in. by 16 in.
net
0
7
The Electromagnet. By C. R. Underhill. 67 illus. 159 pp. crown 8vo. (New York, 1903)
net
6
6
Practical Guide to the Testing of Insulated Wires and Cables. By H. L. Webb. Fifth edition, 38 illus. 118 pp. crown 8vo. (New York, 1902)
net
4
6
Wiring Rules. With Extracts from the Board of Trade Regulations and the Home Office Regulations for Factories and Workshops. Issued by The Institution of Electrical Engineers. Sixth edition, 42 pp. 8vo, sewed. (1911)
English Prices with Russian Equivalents (at Fourteen Rates of Exchange). English prices per lb., with equivalents in roubles and kopecks per pood. By A. Adiassewich. 182 pp. fcap. 32mo, roan. (1908)
net
1
0
English Prices with German Equivalents (at Seven Rates of Exchange). English prices per lb., with equivalents in marks per kilogramme. By St. Koczorowski. 95 pp. fcap. 32mo, roan. (1909)
net
1
0
English Prices with Spanish Equivalents. At Seven Rates of Exchange. English prices per lb., with equivalents in pesetas per kilogramme. By S. Lambert. 95 pp. 32mo, roan. (1910)
net
1
0
English Prices with French Equivalents (at Seven Rates of Exchange). English prices per lb. to francs per kilogramme. By H. P. McCartney. 97 pp. 32mo, roan. (1907)
net
1
0
Principles of Foreign Exchange. By E. Matheson. Fourth edition, 54 pp. 8vo, sewed. (1905)
Gas Analyst's Manual (incorporating Hartley's “Gas Analyst's Manual” and “Gas Measurement”). By J. Abady. 102 illus. 576 pp. demy 8vo. (1902)
net
18
0
Gas Works: their Arrangement, Construction, Plant and Machinery. By F. Colyer. 31 folding plates, 134 pp. 8vo. (1884)
net
8
6
Transactions of the Institution of Gas Engineers. Edited by Walter T. Dunn, Secretary. Published annually. 8vo
net
10
6
Lighting by Acetylene. By F. Dye. 75 illus. 200 pp. crown 8vo. (1902)
net
6
0
A Comparison of the English and French Methods of Ascertaining the Illuminating Power of Coal Gas. By A. J. Van Eijndhoven. Illustrated, crown 8vo. (1897)
4
0
Gas Lighting and Gas Fitting. By W. P. Gerhard. Second edition, 190 pp. 18mo, boards. (New York, 1894)
net
2
0
A Treatise on the Comparative Commercial Values of Gas Coals and Cannels. By D. A. Graham. 3 plates, 100 pp. 8vo. (1882)
4
6
The Gas Engineers Laboratory Handbook. By J. Hornby. Third edition, revised, 70 illus. 330 pp. crown 8vo. (1911)
Extracts from the Private Letters of the late Sir William Fothergill Cooke, 1836-9, relating to the Invention and Development of the Electric Telegraph; also a Memoir by Latimer Clark. Edited by F. H. Webb, Sec. Inst. E.E. 8vo. (1895)
3
0
A Chronology of Inland Navigation in Great Britain. By H. R. De Salis. Crown 8vo. (1897)
4
6
A History of Electric Telegraphy to the year 1837. By J. J. Fahie. 35 illus. 542 pp. crown 8vo. (1889)
2
0
History and Development of Steam Locomotion on Common Roads. By W. Fletcher. 109 illus. 288 pp. 8vo.
5
0
Life as an Engineer: its Lights, Shades, and Prospects. By J. W. C. Haldane. New edition, 23 plates, 390 pp. crown 8vo. (1910)
net
5
0
Philipp Reis, Inventor of the Telephone: a Biographical Sketch. By Prof. S. P. Thompson. 8vo, cloth. (1883)
7
6
The Development of the Mercurial Air Pump. By Prof. S. P. Thompson. Illustrated, royal 8vo, sewed. (1888)
The Suction Caused by Ships explained in popular language. By E. S. Bellasis. 2 plates, 26 pp. 8vo, sewed. (1912)
net
1
0
Hydraulics with Working Tables. By E. S. Bellasis. Second edition, 160 illus. xii + 311 pp. 8vo. (1911)
net
12
0
Pumps: Historically, Theoretically and Practically Considered. By P. R. Björling. Second edition, 156 illus. 234 pp. crown 8vo. (1895)
7
6
Pump Details. By P. R. Björling. 278 illus. 211 pp. crown 8vo. (1892)
7
6
Pumps and Pump Motors: A Manual for the use of Hydraulic Engineers. By P. R. Björling. Two vols. 261 plates, 369 pp. royal 4to. (1895)
net
1
10
0
Practical Handbook on Pump Construction. By P. R. Björling. Second edition, 9 plates, 90 pp. crown 8vo. (1904)
5
0
Water or Hydraulic Motors. By P. R. Björling. 206 illus. 287 pp. crown 8vo. (1903)
9
0
Hydraulic Machinery, with an Introduction to Hydraulics. By R. G. Blaine. Second edition, with 307 illus. 468 pp. 8vo. (Finsbury Technical Manual.) (1905)
net
14
0
Practical Hydraulics. By T. Box. Fifteenth edition, 8 plates, 88 pp. crown 8vo. (1909)
net
5
0
Pumping and Water Power. By F. A. Bradley. 51 illus., vii + 118 pp. demy 8vo. (1912)
net
4
6
Hydraulic, Steam, and Hand Power Lifting and Pressing Machinery. By F. Colyer. Second edition, 88 plates, 211 pp. imperial 8vo. (1892)
net
10
6
Pumps and Pumping Machinery. By F. Colyer.
Vol. I. Second edition, 53 plates, 212 pp. 8vo (1892)
net
10
6
Vol. II. Second edition, 48 plates, 169 pp. 8vo. (1900)
net
10
6
Construction of Horizontal and Vertical Waterwheels. By W. Cullen. Second edition, small 4to. (1871)
5
0
Donaldson's Poncelet Turbine and Water Pressure Engine and Pump. By W. Donaldson. 2 plates, viii + 32 pp. demy 4to. (1883)
5
0
Principles of Construction and Efficiency of Waterwheels. By W. Donaldson. 13 illus. 94 pp. 8vo. (1876)
5
0
Practical Hydrostatics and Hydrostatic Formulæ. By E. S. Gould. 27 illus. 114 pp. 18mo, boards. (New York, 1903)
net
2
0
Hydraulic and other Tables for purposes of Sewerage and Water Supply. By T. Hennell. Third edition, 70 pp. crown 8vo. (1908)
net
4
6
Tables for Calculating the Discharge of Water in Pipes for Water and Power Supplies. Indexed at side for ready reference. By A. E. Silk. 63 pp. crown 8vo. (1899)
5
0
Simple Hydraulic Formulæ. By T. W. Stone. 9 plates, 98 pp. crown 8vo. (1881)
4
0
A B C of Hydrodynamics. By Lt.-Col. R. de Villamil, R.E. (retd.). 48 illus. xi + 135 pp. demy 8vo. (1912)
Perfumes and their Preparation. By G. W. Askinson. Translated from the Third German Edition by I. Fuest. Third edition, 32 illus. 312 pp. 8vo. (New York, 1907)
net
12
6
Brewing Calculations, Gauging and Tabulation. By C. H. Bater. 340 pp. 64mo, roan, gilt edges. (1897)
net
1
6
A Pocket Book for Chemists, Chemical Manufacturers, Metallurgists, Dyers, Distillers, etc. By T. Bayley. Seventh edition, new impression, 550 pp. royal 32mo, roan, gilt edges. (1912)
net
5
0
Practical Receipts for the Manufacturer, the Mechanic, and for Home use. By Dr. H. R. Berkeley and W. M. Walker. New impression, 250 pp. demy 8vo. (1912)
net
5
0
A Treatise on the Manufacture of Soap and Candles, Lubricants and Glycerine. By W. L. Carpenter and H. Leask. Second edition, 104 illus. 456 pp. crown 8vo. (1895)
12
6
A Text Book of Paper Making. By C. F. Cross and E. J. Bevan. Third edition, 97 illus. 411 pp. crown 8vo. (1907)
net
12
6
C.B.S. Standard Units and Standard Paper Tests. By C. F. Cross, E. J. Bevan, C. Beadle and R. W. Sindall. 25 pp. crown 4to. (1903)
net
2
6
Pyrometry. By C. R. Darling. 60 illus. 200 pp. crown 8vo. (1911)
net
5
0
Soda Fountain Requisites. A Practical Receipt Book for Druggists, Chemists, etc. By G. H. Dubelle. Third edition, 157 pp. crown 8vo. (New York, 1905)
net
4
6
Spices and How to Know Them. By W. M. Gibbs. 47 plates, including 14 in colours, 176 pp. 8vo. (New York, 1909)
net
15
0
The Chemistry of Fire and Fire Prevention. By H. and H. Ingle. 45 illus. 290 pp. crown 8vo. (1900)
9
0
Ice-Making Machines. By M. Ledoux and others. Sixth edition, 190 pp. 18mo, boards. (New York, 1906)
net
2
0
Brewing with Raw Grain. By T. W. Lovibond. 75 pp. crown 8vo. (1883)
5
0
The Chemistry, Properties, and Tests of Precious Stones. By J. Mastin. 114 pp. fcap. 16mo, limp leather, gilt top. (1911)
net
2
6
Sugar, a Handbook for Planters and Refiners. By the late J. A. R. Newlands and B. E. R. Newlands. 236 illus. 876 pp. 8vo. (1909)
net
1
5
0
Principles of Leather Manufacture. By Prof. H. R. Procter. 101 illus. 520 pp. medium 8vo. (1908)
net
18
0
Leather Industries Laboratory Handbook of Analytical and Experimental methods. By H. R. Procter. Second edition, 4 plates, 46 illus. 450 pp. demy 8vo. (1908)
net
18
0
Leather Chemists' Pocket Book. A short compendium of Analytical Methods. By Prof. H. R. Procter. Assisted by Dr. E. Stiasny and H. Brumwell. (In the Press.)
Theoretical and Practical Ammonia Refrigeration. By I. I. Redwood. Sixth thousand, 15 illus. 146 pp. square 16mo. (New York, 1909)
net
4
6
Breweries and Maltings. By G. Scammell and F. Colyer. Second edition, 20 plates, 178 pp. 8vo. (1880)
net
6
0
Factory Glazes for Ceramic Engineers. By H. Rum-Bellow. Folio. Series A, Leadless Sanitary Glazes. (1908)
net
2
2
0
Spons' Encyclopædia of the Industrial Arts, Manufactures and Commercial Products. 1500 illus. 2100 pp. super-royal 8vo. (1882)
In 2 Vols, cloth
net
2
2
0
The Absorption Refrigerating Machine. By G. T. Voorhees. 42 illus. 144 pp. narrow crown 8vo. (New York, 1911)
net
8
6
Tables for the Quantitative Estimation of the Sugars. By E. Wein and W. Frew. Crown 8vo. (1896)
6
0
The Puering, Bating and Drenching of Skins. By J. T. Wood. 33 illus. xv + 300 pp. demy 8vo. (1912)
net
12
6
Workshop Receipts. For the use of Manufacturers, Mechanics and Scientific Amateurs. New and thoroughly Revised Edition, crown 8vo. (1909)
each net
3
0
Vol. I. Acetylene Lighting to Drying. 223 illus. 532 pp.
Vol. II. Dyeing to Japanning. 259 illus. 540 pp.
Vol. III. Jointing Pipes to Pumps. 256 illus. 528 pp.
Vol. IV. Rainwater Separators to Wire Rope, Splicing. 321 illus. 540 pp.
Practical Handbook on the Distillation of Alcohol from Farm Products. By F. B. Wright. Second edition, 60 illus. 271 pp. crown 8vo. (New York, 1907)
net
4
6
The Manufacture of Chocolate and other Cacao Preparations. By P. Zipperer. Second edition, 87 illus. 280 pp. royal 8vo. (1902)
The Wide Range Dividend and Interest Calculator, showing at a glance the Percentage on any sum from One Pound to Ten Thousand Pounds, at any Interest, from 1% to 12½%, proceeding by ¼%. By A. Stevens. 100 pp. super royal 8vo, cloth
net
6
0
Quarter morocco, cloth sides
net
7
6
The Wide Range Income Tax Calculator, showing at a glance the Tax on any sum from One Shilling to Thousand Pounds, at the Rate of 9d., 1/- and ½ in the Pound. By A. Stevens. On folding card, imperial 8vo
Aldum's Pocket Folding Mathematical Tables. Four-figure logarithms, and Anti-logarithms, Natural Sines, Tangents, Cotangents, Cosines, Chords and Radians for all angles from 1 to 90 degrees. And Decimaliser Table for Weights and Money. On folding card. Net 4d. 20 copies, net 6s.
Tables of Seven-figure Logarithms of the Natural Numbers from 1 to 108,000. By C. Babbage. Stereotype edition, 8vo
net
5
0
Four-Place Tables of Logarithms and Trigonometric Functions. By E. V. Huntington. Ninth thousand, 34 pp. square 8vo, limp buckram, with cut lateral index. (New York, 1911)
net
3
0
Short Logarithmic and other Tables. By W. C. Unwin. Fourth edition, small 4to
3
0
Logarithmic Land Measurement. By J. Wallace. 32 pp. royal 8vo. (1910)
net
5
0
A B C Five-figure Logarithms with Tables, for Chemists. By C. J. Woodward. Crown 8vo
net
2
6
A B C Five-figure Logarithms for general use, with lateral index for ready reference. By C. J. Woodward. Second edition, with cut lateral Index, 116 pp. 12mo, limp leather
Marine Propellers. By S. W. Barnaby. Fifth edition, 5 plates, 56 illus. 185 pp. demy 8vo. (1908)
net
10
6
Marine Engineer's Record Book: Engines. By B. C. Bartley. 8vo, roan
net
5
0
The Suction Caused by Ships and the Olympic-Hawke Collision. By E. S. Bellasis. 1 chart and 5 illus. in text, 26 pp. 8vo, sewed. (1912)
net
1
0
Yachting Hints, Tables and Memoranda. By A. C. Franklin. Waistcoat pocket size, 103 pp. 64mo, roan, gilt edges
net
1
0
Steamship Coefficients, Speeds and Powers. By C. F. A. Fyfe. 31 plates, 280 pp. fcap. 8vo, leather. (1907)
net
10
6
Steamships and Their Machinery, from first to last. By J. W. C. Haldane. 120 illus. 532 pp. 8vo. (1893)
15
0
Tables for Constructing Ships' Lines. By A. Hogg. Third edition, 3 plates, 20 pp. 8vo, sewed (1911)
net
3
0
Submarine Boats. By G. W. Hovgaard. 2 plates, 98 pp. crown 8vo. (1887)
5
0
Tabulated Weights of Angle, Tee, Bulb, Round, Square, and Flat Iron and Steel for the use of Naval Architects, Ship-builders, etc. By C. H. Jordan. Sixth edition, 640 pp. royal 32mo, French morocco, gilt edges. (1909)
net
7
6
Particulars of Dry Docks, Wet Docks, Wharves, etc. on the River Thames. Compiled by C. H. Jordan. Second edition, 7 coloured charts, 103 pp. oblong 8vo. (1904)
net
2
6
Marine Transport of Petroleum. By H. Little. 66 illus. 263 pp. crown 8vo. (1890)
10
6
Questions and Answers for Marine Engineers, with a Practical Treatise on Breakdowns at Sea. By T. Lucas. 12 folding plates, 515 pp. gilt edges, crown 8vo. (New York, 1902)
net
8
0
Reed's Engineers' Handbook to the Board of Trade Examinations for certificates of Competency as First and Second Class Engineers. Nineteenth edition, 37 plates, 358 illus. 696 pp. 8vo
net
14
0
Key to Reed's Handbook
net
7
6
Reed's Marine Boilers. Second edition, crown 8vo
net
4
6
Reed's Useful Hints to Sea-going Engineers. Fourth edition, 8 plates, 50 illus. 312 pp. crown 8vo. (1903)
Imaginary Quantities. By M. Argand. Translated by Prof. Hardy. 18mo, boards. (New York)
net
2
0
Text Book of Practical Solid Geometry. By E. H. de V. Atkinson. Revised by Major B. R. Ward, R.E. Second edition, 17 plates, 8vo. (1901)
7
6
Quick and Easy Methods of Calculating, and the Theory and Use of the Slide Rule. By R. G. Blaine. Fourth edition, 6 illus. xii + 152 pp. 16mo, leather cloth. (1912)
net
2
6
Symbolic Algebra, or the Algebra of Algebraic Numbers. By W. Cain. 18mo, boards. (New York)
net
2
0
Nautical Astronomy. By J. H. Colvin. 127 pp. crown 8vo. (1901)
net
2
6
Chemical Problems. By J. C. Foye. Fourth edition, 141 pp. 18mo, boards. (New York, 1898)
net
2
0
Primer of the Calculus. By E. S. Gould. Second edition, 24 illus. 122 pp. 18mo, boards. (New York, 1899)
net
2
0
Elementary Treatise on the Calculus for Engineering Students. By J. Graham. Third edition, 276 pp. crown 8vo. (Finsbury Technical Manual.) (1905)
7
6
Manual of the Slide Rule. By F. A. Halsey. Second edition, 31 illus. 84 pp. 18mo, boards. (New York, 1901)
net
2
0
Reform in Chemical and Physical Calculations. By C. J. T. Hanssen. 4to. (1897)
net
6
6
Algebra Self-Taught. By P. Higgs. Third edition, 104 pp. crown 8vo. (1903)
2
6
A Text-book on Graphic Statics. By C. W. Malcolm. 155 illus. 316 pp. 8vo. (New York, 1909)
net
12
6
Galvanic Circuit investigated Mathematically. By G. S. Ohm. Translated by William Francis. 269 pp. 18mo, boards. (New York, 1891)
net
2
0
Elementary Practical Mathematics. By M. T. Ormsby. Second edition, 128 illus. xii + 410 pp. medium 8vo. (1911)
net
5
0
Elements of Graphic Statics. By K. Von Ott. Translated by G. S. Clarke. 93 illus. 128 pp. crown 8vo. (1901)
5
0
Figure of the Earth. By F. C. Roberts. 18mo, boards. (New York)
net
2
0
Arithmetic of Electricity. By T. O'C. Sloane. Thirteenth edition, 5 illus. 162 pp. crown 8vo. (New York, 1901)
net
4
6
Graphic Method for Solving certain Questions in Arithmetic or Algebra. By G. L. Vose. Second edition with 28 illus. 62 pp. 18mo, boards. (New York, 1902)
net
2
0
Problems in Electricity. A Graduated Collection comprising all branches of Electrical Science. By R. Weber. Translated from the French by E. A. O'Keefe. 34 illus. 366 pp. crown 8vo. (1902)
Engineers' Sketch Book of Mechanical Movements. By T. W. Barber. Fifth edition, 3000 illus. 355 pp. 8vo. (1906)
net
10
6
The Repair and Maintenance of Machinery. By T. W. Barber. 417 illus. 476 pp. 8vo. (1895)
10
6
Practical Treatise on Mill Gearing. By T. Box. Fifth edition, 11 plates, 128 pp. crown 8vo. (1892)
7
6
The Mechanical Engineers' Price Book, 1912. Edited by G. Brooks. 176 pp. pocket size (6½ in. by 3¾ in. by ½ in. thick), leather cloth, with rounded corners. (1912)
net
4
0
Safety Valves. By R. H. Buell. Third edition, 20 illus. 100 pp. 18mo, boards. (New York, 1898)
net
2
0
Machine Design. By Prof. W. L. Cathcart. Part I. Fastenings. 123 illus. 291 pp. demy 8vo. (New York, 1903)
net
12
6
Chimney Design and Theory. By W. W. Christie. Second edition, 54 illus. 192 pp. crown 8vo. (New York, 1902)
net
12
6
Furnace Draft: its Production by Mechanical Methods. By W. W. Christie. 5 illus. 80 pp. 18mo, boards. (New York, 1906)
net
2
0
The Stokers' Catechism. By W. J. Connor. 63 pp. limp cloth. (1906)
net
1
0
Treatise on the use of Belting for the Transmission of Power. By J. H. Cooper. Fifth edition, 94 illus. 399 pp. demy 8vo. (New York, 1901)
net
12
6
The Steam Engine considered as a Thermodynamic Machine. By J. H. Cotterill. Third edition, 39 diagrams, 444 pp. 8vo. (1896)
15
0
Fireman's Guide, a Handbook on the Care of Boilers. By K. P. Dahlstrom. Eleventh edition, fcap. 8vo, limp. (S. & C. Series, No. 16.) (New York, 1906)
net
1
6
Heat for Engineers. By C. R. Darling. Second edition, 110 illus. 430 pp. 8vo. (Finsbury Technical Manual.) (1912)
net
12
6
Diseases of a Gasolene Automobile, and How to Cure Them. By A. L. Dyke. 127 illus. 201 pp. crown 8vo. (New York, 1903)
net
6
6
Belt Driving. By G. Halliday. 3 folding plates, 100 pp. 8vo. (1894)
3
6
Worm and Spiral Gearing. By F. A. Halsey. 13 plates, 85 pp. 18mo, boards. (New York, 1903)
net
2
0
Commercial Efficiency of Steam Boilers. By A. Hanssen. Large 8vo, sewed. (1898)
0
6
Corliss Engine. By J. T. Henthorn. Third edition, 23 illus. 95 pp. square 16mo. (S. & C. Series, No. 23.) (New York, 1910)
net
1
6
Liquid Fuel for Mechanical and Industrial Purposes. By E. A. Brayley Hodgetts. 106 illus. 129 pp. 8vo. (1890)
5
0
Elementary Text-Book on Steam Engines and Boilers. By J. H. Kinealy. Fourth edition, 106 illus. 259 pp. 8vo. (New York, 1903)
net
8
6
Centrifugal Fans. By J. H. Kinealy. 33 illus. 206 pp. fcap. 8vo, leather. (New York, 1905)
net
12
6
Mechanical Draft. By J. H. Kinealy. 27 original tables and 13 plates, 142 pp. crown 8vo. (New York, 1906)
net
8
6
The A B C of the Steam Engine, with a description of the Automatic Governor. By J. P. Lisk. 6 plates, crown 8vo. (S. & C. Series, No. 17.) (New York, 1910)
net
1
6
Valve Setting Record Book. By P. A. Low. 8vo, boards
1
6
The Lay-out of Corliss Valve Gears. By S. A. Moss. Second edition, 3 plates, 108 pp. 18mo, boards. (New York, 1906)
net
2
0
Steam Boilers, their Management and Working. By J. Peattie. Fifth edition, 35 illus. 230 pp. crown 8vo. (1906)
net
4
6
Treatise on the Richards Steam Engine Indicator. By C. T. Porter. Sixth edition, 3 plates and 73 diagrams, 285 pp. 8vo. (1902)
9
0
Practical Treatise on the Steam Engine. By A. Rigg. Second edition, 103 plates, 378 pp. demy 4to. (1894)
15
0
Power and its Transmission. A Practical Handbook for the Factory and Works Manager. By T. A. Smith. 76 pp. fcap. 8vo. (1910)
net
2
0
Drawings for Medium Sized Repetition Work. By R. D. Spinney. With 47 illus. 130 pp. 8vo. (1909)
net
3
6
Slide Valve Simply Explained. By W. J. Tennant. Revised by J. H. Kinealy. 41 illus. 83 pp. crown 8vo. (New York, 1899)
net
4
6
Shaft Governors. By W. Trinks and C. Hoosum. 27 illus. 97 pp. 18mo, boards. (New York, 1905)
net
2
0
Treatise on the Design and Construction of Mill Buildings. By H. G. Tyrrell. 652 illus. 490 pp. 8vo. (New York, 1911)
net
17
0
Slide and Piston Valve Geared Steam Engines. By W. H. Uhland. 47 plates and 314 illus. 155 pp. Two vols. folio, half morocco. (1882)
1
16
0
How to run Engines and Boilers. By E. P. Watson. Fifth edition, 31 illus. 160 pp. crown 8vo. (New York, 1904)
3
6
Position Diagram of Cylinder with Meyer Cut-off. By W. H. Weightman. On card. (New York)
net
1
0
Practical Method of Designing Slide Valve Gearing. By E. J. Welch. 69 diagrams, 283 pp. crown 8vo. (1890)
6
0
Elements of Mechanics. By T. W. Wright. Eighth edition, illustrated, 382 pp. 8vo. (New York, 1909)
Life of Railway Axles. By T. Andrews. 8vo, sewed. (1895)
1
0
Microscopic Internal Flaws in Steel Rails and Propeller Shafts. By T. Andrews. 8vo, sewed. (1896)
1
0
Microscopic Internal Flaws, Inducing Fracture in Steel. By T. Andrews. 8vo, sewed. (1896)
2
0
Practical Alloying. A compendium of Alloys and Processes for Brassfounders, Metal Workers, and Engineers. By John F. Buchanan. With 41 illus. 205 pp. 8vo, cloth. (New York, 1911)
net
10
6
Brassfounders' Alloys. By J. F. Buchanan. Illustrated, 129 pp. crown 8vo. (1905)
net
4
6
The Moulder's Dictionary (Foundry Nomenclature). A concise guide to Foundry Practice. By John F. Buchanan. New impression, 26 illus. viii + 225 pp. crown 8vo. (1912)
net
3
0
American Standard Specifications for Steel. By A. L. Colby. Second edition, revised, 103 pp. crown 8vo. (New York, 1902)
net
5
0
Pyrometry. By C. R. Darling. 60 illus. 200 pp. crown 8vo. (1911)
net
5
0
Galvanised Iron: its Manufacture and Uses. By J. Davies. 139 pp. 8vo. (1899)
net
5
0
Management of Steel. By G. Ede. Seventh edition, 216 pp. crown 8vo. (1903)
5
0
The Frodair Handbook for Ironfounders. 160 pp. 12mo. (1910)
net
2
0
Cupola Furnace. A practical treatise on the Construction and Management of Foundry Cupolas. By E. Kirk. Third edition, 106 illus. 484 pp. demy 8vo. (New York, 1910)
net
15
0
Practical Notes on Pipe Founding. By J. W. Macfarlane. 15 plates, 148 pp. 8vo. (1888)
12
6
Atlas of Designs concerning Blast Furnace Practice. By M. A. Pavloff. 127 plates, 14 in. by 10½ in. oblong, sewed. (1902)
net
1
1
0
Album of Drawings relating to the Manufacture of Open Hearth Steel. By M. A. Pavloff.
Part I. Open Hearth Furnaces. 52 plates, 14 in. by 10½ in. oblong folio, in portfolio. (1904)
net
12
0
Metallography Applied to Siderurgic Products. By H. Savoia. Translated by R. G. Corbet. 94 illus. 180 pp. crown 8vo. (1910)
net
4
6
Modern Foundry Practice. Including revised subject matter and tables from Spretson's “Casting and Founding.” By J. Sharp. Second edition, New impression, 272 illus. 759 pp. 8vo. (1911)
net
1
1
0
Roll Turning for Sections in Steel and Iron. By A. Spencer. Second edition, 78 plates, 4to. (1894)
Rock Blasting. By G. G. Andre. 12 plates and 56 illus. in text, 202 pp. 8vo. (1878)
5
0
Winding Plants for Great Depths. By H. C. Behr. In two parts. 8vo, sewed. (1902)
net
2
2
0
Practical Treatise on Hydraulic Mining in California. By A. J. Bowie, Jun. Tenth edition, 73 illus. 313 pp. royal 8vo. (New York, 1905)
net
1
1
0
Tables for the Determination of Common Rocks. By O. Bowles. 64 pp. 18mo, boards. (Van Nostrand Series, No. 125.) (New York, 1910)
net
2
0
Manual of Assaying Gold, Silver, Copper and Lead Ores. By W. L. Brown. Twelfth edition, 132 illus. 589 pp. crown 8vo. (New York, 1907)
net
10
6
Fire Assaying. By E. W. Buskett. 69 illus. 105 pp. crown 8vo. (New York, 1907)
net
4
6
Tin: Describing the Chief Methods of Mining, Dressing, etc. By A. G. Charleton. 15 plates, 83 pp. crown 8vo. (1884)
12
6
Gold Mining and Milling in Western Australia, with Notes upon Telluride Treatment, Costs and Mining Practice in other Fields. By A. G. Charleton. 82 illus. and numerous plans and tables, 648 pp. super-royal 8vo. (1903)
net
1
5
0
Miners' Geology and Prospectors' Guide. By G. A. Corder. 29 plates, 224 pp. crown 8vo. (1907)
net
5
0
Blasting of Rock in Mines, Quarries, Tunnels, etc. By A. W. and Z. W. Daw. Second edition, 90 illus. 316 pp. demy 8vo. (1909)
net
15
0
Handbook of Mineralogy; determination and description of Minerals found in the United States. By J. C. Foye. 180 pp. 18mo, boards. (New York, 1886)
net
2
0
Our Coal Resources at the End of the Nineteenth Century. By Prof. E. Hull. 157 pp. demy 8vo. (1897)
6
0
Hydraulic Gold Miners' Manual. By T. S. G. Kirkpatrick. Second edition, 12 illus. 46 pp. crown 8vo. (1897)
4
0
Economic Mining. By C. G. W. Lock. 175 illus. 680 pp. 8vo. (1895)
net
10
6
Gold Milling: Principles and Practice. By C. G. W. Lock. 200 illus. 850 pp. demy 8vo. (1901)
net
1
1
0
Mining and Ore-Dressing Machinery. By C. G. W. Lock. 639 illus. 466 pp. super-royal 4to. (1890)
1
5
0
Miners' Pocket Book. By C. G. W. Lock. Fifth edition, 233 illus. 624 pp. fcap. 8vo, leather, gilt edges. (1908)
net
10
6
Chemistry, Properties and Tests of Precious Stones. By J. Mastin. 114 pp. fcap. 16mo, limp leather, gilt top. (1911)
net
2
6
Tests for Ores, Minerals and Metals of Commercial Value. By R. L. McMechen. 152 pp. 12mo. (New York, 1907)
net
5
6
Practical Handbook for the Working Miner and Prospector, and the Mining Investor. By J. A. Miller. 34 illus. 234 pp. crown 8vo. (1897)
7
6
Theory and Practice of Centrifugal Ventilating Machines. By D. Murgue. 7 illus. 81 pp. 8vo. (1883)
5
0
Examples of Coal Mining Plant. By J. Povey-Harper. Second edition, 40 plates, 26 in. by 20 in. (1895)
net
4
4
0
Examples of Coal Mining Plant, Second Series. By J. Povey-Harper. 10 plates, 26 in. by 20 in. (1902)
Organisation of Gold Mining Business, with Specimens of the Departmental Report Books and the Account Books. By Nicol Brown. Second edition, 220 pp. fcap. folio. (1903)
net
1
5
0
Cost Keeping and Management Engineering. A Treatise for those engaged in Engineering Construction. By H. P. Gillette and R. T. Dana. 184 illus. 346 pp. 8vo. (New York, 1909)
net
15
0
Manual of Engineering Specifications and Contracts. By L. M. Haupt. Eighth edition, 338 pp. 8vo. (New York, 1900)
net
12
6
Handbook on Railway Stores Management. By W. O. Kempthorne. 268 pp. demy 8vo. (1907)
net
10
6
Depreciation of Factories, Municipal, and Industrial Undertakings, and their Valuation. By E. Matheson. Fourth edition, 230 pp. 8vo. (1910)
net
10
6
Aid Book to Engineering Enterprise. By E. Matheson. Third edition, 916 pp. 8vo, buckram. (1898)
1
4
0
Office Management. A handbook for Architects and Civil Engineers. By W. Kaye Parry. New impression, 187 pp. medium 8vo. (1908)
net
5
0
Commercial Organisation of Engineering Factories. By H. Spencer. 92 illus. 221 pp. 8vo. (1907)
The Entropy Diagram and its Applications. By M. J. Boulvin. 38 illus. 82 pp. demy 8vo. (1898)
5
0
Physical Problems and their Solution. By A. Bourgougnon. 224 pp. 18mo, boards. (New York, 1897)
net
2
0
Heat for Engineers. By C. R. Darling. Second edition, 110 illus. 430 pp. 8vo. (Finsbury Technical Manual.) (1912)
net
12
6
The Colourist. A method of determining colour harmony. By J. A. H. Hatt. 2 coloured plates, 80 pp. 8vo. (New York, 1908)
net
6
6
Engineering Thermodynamics. By C. F. Hirschfeld. 22 illus. 157 pp. 18mo, boards. (New York, 1907)
net
2
0
Experimental Science: Elementary, Practical and Experimental Physics. By G. M. Hopkins. Twenty-third edition, 920 illus. 1100 pp. large 8vo. (New York, 1902)
net
1
1
0
Reform in Chemical and Physical Calculations. By C. J. T. Hanssen. Demy 4to. (1897)
net
6
6
Introduction to the Study of Colour Phenomena. By J. W. Lovibond. 10 hand coloured plates, 48 pp. 8vo. (1905)
net
5
0
Practical Laws and Data on the Condensation of Steam in Bare Pipes; to which is added a Translation of Peclet's Theory and Experiments on the Transmission of Heat through Insulating Materials. By C. P. Paulding. 184 illus. 102 pp. demy 8vo. (New York, 1904)
net
8
6
The Energy Chart. Practical application to reciprocating steam-engines. By Captain H. R. Sankey. 157 illus. 170 pp. 8vo. (1907)
The Mechanical Engineers' Price Book, 1912. By G. Brooks. 176 pp. pocket size (6½ in. by 3¾ in. by ½ in. thick), leather cloth, with rounded corners. (1912)
net
4
0
Approximate Estimates. By T. E. Coleman. Third edition, 481 pp. oblong 32mo, leather. (1907)
net
5
0
The Civil Engineers' Cost Book. By Major T. E. Coleman. xii. + 289 pp. pocket size (6½ in. by 3¾ in.), leather cloth. (1912)
net
5
0
Railway Stores Price Book. By W. O. Kempthorne. 500 pp. demy 8vo. (1909)
net
10
6
Handbook of Cost Data for Contractors and Engineers. By H. P. Gillette. 1854 pp. cr. 8vo, leather, gilt edges. (New York, 1910)
net
1
1
0
Spons' Architects' and Builders' Pocket Price-Book and Diary, 1912. Edited by Clyde Young. Revised by Stanford M. Brooks. Illustrated, 239 pp. green leather cloth. With Diary showing a week at an opening. (Size 6½ in. by 3¾ in. by ½ in. thick). Issued annually
Practical Hints to Young Engineers Employed on Indian Railways. By A. W. C. Addis. 14 illus. 154 pp. 12mo. (1910)
net
3
6
Field and Office Tables, specially applicable to Railroads. By C. F. Allen. 293 pp. 16mo, leather. (New York, 1903)
net
8
6
Up-to-date Air Brake Catechism. By R. H. Blackall. Twenty-third edit. 5 coloured plates, 96 illus. 305 pp. crown 8vo. (New York, 1908)
net
8
6
Prevention of Railroad Accidents, or Safety in Railroading. By Geo. Bradshaw. 64 illus. 173 pp. square crown 8vo. (New York, 1912)
net
2
6
Simple and Automatic Vacuum Brakes. By C. Briggs, G.N.R. 11 plates, 8vo. (1892)
4
0
Notes on Permanent-way Material, Plate-laying, ad Points and Crossings. By W. H. Cole. Sixth edition, revised, 44 illus. in 39 plates, 203 pp. crown 8vo. (1912)
net
7
6
Statistical Tables of the Working of Railways in various countries up to the year 1904. By J. D. Diacomidis. Second edition, 84 pp. small folio, sewed. (1906)
net
16
0
Locomotive Breakdowns, Emergencies and their Remedies. By Geo. L. Fowler, M.E., and W. W. Wood. Fifth edition, 92 illus. 266 pp. 12mo. (New York, 1911)
net
4
6
Permanent-Way Diagrams. By F. H. Frere. Mounted on linen in cloth covers. (1908)
net
3
0
Formulæ for Railway Crossings and Switches. By J. Glover. 9 illus. 28 pp. royal 32mo. (1896)
2
6
Setting out of Tube Railways. By G. M. Halden. 9 plates, 46 illus. 68 pp. crown 4to. (1907)
net
10
6
Railway Engineering, Mechanical and Electrical. By J. W. C. Haldane. New edition, 141 illus. xx + 583 pp. 8vo. (1908)
15
0
The Construction of the Modern Locomotive. By G. Hughes. 300 illus. 261 pp. 8vo. (1894)
9
0
Practical Hints for Light Railways at Home and Abroad. By F. R. Johnson. 6 plates, 31 pp. crown 8vo. (1896)
2
6
Handbook on Railway Stores Management. By W. O. Kempthorne. 268 pp. demy 8vo. (1907)
net
10
6
Railway Stores Price Book. By W. O. Kempthorne. 487 pp. demy 8vo. (1909)
net
10
6
Railroad Location Surveys and Estimates. By F. Lavis. 68 illus. 270 pp. 8vo. (New York, 1906)
net
12
6
Pioneering. By F. Shelford. Illustrated, 88 pp. crown 8vo. (1909)
net
3
0
Handbook on Railway Surveying for Students and Junior Engineers. By B. Stewart. 55 illus. 98 pp. crown 8vo. (1909)
net
2
6
Modern British Locomotives. By A. T. Taylor. 100 diagrams of principal dimensions, 118 pp. oblong 8vo. (1907)
net
4
6
Locomotive Slide Valve Setting. By C. E. Tully. Illustrated, 18mo
net
1
0
The Railway Goods Station. By F. W. West. 23 illus., xv + 192 pp. crown 8vo. (1912)
net
4
6
The Walschaert Locomotive Valve Gear. By W. W. Wood. 4 plates and set of movable cardboard working models of the valves, 193 pp. crown 8vo. (New York, 1907)
net
6
6
The Westinghouse E.T. Air-Brake Instruction Pocket Book. By W. W. Wood. 48 illus. including many coloured plates, 242 pp. crown 8vo. (New York, 1909)
Sewers and Drains for Populous Districts. By J. W. Adams. Ninth edition, 81 illus. 236 pp. 8vo. (New York, 1902)
net
10
6
Engineering Work in Public Buildings. By R. O. Allsop. 77 illus. ix + 158 pp. demy 4to. (1912)
net
12
6
Public Abattoirs, their Planning, Design and Equipment. By R. S. Ayling. 33 plates, 100 pp. demy 4to. (1908)
net
8
6
Sewage Purification. By E. Bailey-Denton. 8 plates, 44 pp. 8vo. (1896)
5
0
Water Supply and Sewerage of Country Mansions and Estates. By E. Bailey-Denton. 76 pp. crown 8vo. (1901)
net
2
6
Sewerage and Sewage Purification. By M. N. Baker. Second edition, 144 pp. 18mo, boards. (New York, 1905)
net
2
0
Sewage Irrigation by Farmers. By R. W. P. Birch. 8vo, sewed. (1878)
2
6
Sanitary House Drainage, its Principles and Practice. By T. E. Coleman. 98 illus. 206 pp. crown 8vo. (1896)
6
0
Stable Sanitation and Construction. By T. E. Coleman. 183 illus. 226 pp. crown 8vo. (1897)
6
0
Public Institutions, their Engineering, Sanitary and other Appliances. By F. Colyer. 231 pp. 8vo. (1889)
net
2
0
Discharge of Pipes and Culverts. By P. M. Crosthwaite. Large folding sheet in case
net
2
6
A Complete and Practical Treatise on Plumbing and Sanitation: Hot Water Supply, Warming and Ventilation, Steam Cooking, Gas, Electric Light, Bells, etc., with a complete Schedule of Prices of Plumber's Work. By G. B. Davis and F. Dye. 2 vols. 637 illus. and 21 folding plates, 830 pp. 4to, cloth. (1899)
net
1
10
0
Standard Practical Plumbing. By P. J. Davies.
Vol. I. Fourth edition, 768 illus. 355 pp. royal 8vo. (1905)
net
7
6
Vol. II. Second edition, 953 illus. 805 pp. (1905)
net
10
6
Vol. III. 313 illus. 204 pp. (1905)
net
5
0
Conservancy, or Dry Sanitation versus Water Carriage. By J. Donkin. 7 plates, 33 pp. 8vo, sewed. (1906)
net
1
0
Sewage Disposal Works, their Design and Construction. By W. C. Easdale. With 160 illus. 264 pp. demy 8vo. (1910)
net
10
6
House Drainage and Sanitary Plumbing. By W. P. Gerhard. Tenth edition, 6 illus. 231 pp. 18mo, boards. (New York, 1902)
net
2
0
Central Station Heating. By B. T. Gifford. 37 illus. 208 pp. 8vo, leather. (New York, 1912)
net
17
0
Housing and Town Planning Conference. Report of Conference held by the Institution of Municipal and County Engineers. Edited by T. Cole, Secretary. 30 plates, 240 pp. demy 8vo. (1911)
net
10
6
Engineering Work in Towns and Cities. By E. McCulloch. 44 illus. 502 pp. crown 8vo. (New York, 1908)
net
12
6
The Treatment of Septic Sewage. By G. W. Rafter. 137 pp. 18mo, boards. (New York, 1904)
net
2
0
Reports and Investigations on Sewer Air and Sewer Ventilation. By R. H. Reeves. 8vo, sewed. (1894)
1
0
The Law and Practice of Paving Private Street Works. By W. Spinks. Fourth edition, 256 pp. 8vo. (1904)
Potable Water and Methods of Testing Impurities. By M. N. Baker. 97 pp. 18mo, boards. (New York, 1905)
net
2
0
Manual of Hydrology. By N. Beardmore. New impression, 18 plates, 384 pp. 8vo. (1906)
net
10
6
Boiler Waters, Scale, Corrosion and Fouling. By W. W. Christie. 77 illus. 235 pp. 8vo, cloth. (New York, 1907)
net
12
6
Water Softening and Purification. By H. Collet. Second edition, 6 illus. 170 pp. crown 8vo. (1908)
net
5
0
Treatise on Water Supply, Drainage and Sanitary Appliances of Residences. By F. Colyer. 100 pp. crown 8vo. (1899)
net
1
6
Purification of Public Water Supplies. By J. W. Hill. 314 pp. 8vo. (New York, 1898)
10
6
Well Boring for Water, Brine and Oil. By C. Isler. Second edition, 105 illus. 296 pp. 8vo. (1911)
net
10
6
Method of Measuring Liquids Flowing through Pipes by means of Meters of Small Calibre. By Prof. G. Lange. 1 plate, 16 pp. 8vo, sewed
net
0
6
On Artificial Underground Water. By G. Richert. 16 illus. 33 pp. 8vo, sewed. (1900)
net
1
6
Notes on Water Supply in new Countries. By F. W. Stone. 18 plates, 42 pp. crown 8vo. (1888)
5
0
The Principles of Waterworks Engineering. By J. H. T. Tudsbery and A. W. Brightmore. Third edition, 13 folding plates, 130 illus. 447 pp. demy 8vo. (1905)
A Handbook for Apprenticed Machinists. By O. J. Beale. Second edition, 89 illus., 141 pp. 16mo. (New York, 1901)
net
2
6
Practice of Hand Turning. By F. Campin. Third edition, 99 illus. 307 pp. crown 8vo. (1883)
3
6
Artistic Leather Work. By E. Ellin Carter. 6 plates and 21 illus. in text, xii + 51 pp. crown 8vo. (1912)
net
2
6
Calculation of Change Wheels for Screw Cutting on Lathes. By D. De Vries. 46 illus. 83 pp. 8vo. (1908)
net
3
0
Milling Machines and Milling Practice. By D. de Vries. With 536 illus. 464 pp. medium 8vo. (1910)
net
14
0
French-Polishers' Manual. By a French-Polisher. New impression, 31 pp. royal 32mo, sewed. (1912)
net
0
6
Art of Copper-Smithing. By J. Fuller. Fourth edition, 483 illus. 319 pp. royal 8vo. (New York, 1911)
net
12
6
Hand Forging and Wrought Iron Ornamental Ironwork. By T. F. Googerty. 122 illus. 197 pp. crown 8vo. (New York, 1912)
net
4
6
Saw Filing and Management of Saws. By R. Grimshaw. New edition, 81 illus. 16mo. (New York, 1906)
net
4
6
Paint and Colour Mixing. By A. S. Jennings. Fourth edition. 14 coloured plates, 190 pp. 8vo. (1910)
net
5
0
The Mechanician: a Treatise on the Construction and Manipulation of Tools. By C. Knight. Fifth edition, 96 plates, 397 pp. 4to. (1897)
18
0
Turner's and Fitter's Pocket Book. By J. La Nicca. 18mo, sewed
0
6
Tables for Engineers and Mechanics, giving the values of the different trains of wheels required to produce Screws of any pitch. By Lord Lindsay. Second edition, royal 8vo, oblong.
2
0
Screw-cutting Tables. By W. A. Martin. Seventh edition, royal 8vo, oblong
net
1
0
Metal Plate Work, its Patterns and their Geometry, for the use of Tin, Iron and Zinc Plate Workers. By C. T. Millis. Fourth edition, 280 diagrams, 470 pp. crown 8vo. (1906)
9
0
The Practical Handbook of Smithing and Forging. Engineers' and General Smiths' Work. By T. Moore. New impression, 401 illus. 248 pp. crown 8vo. (1912)
net
5
0
Modern Machine Shop Construction, equipment and management. By O. E. Perrigo. 208 illus. 343 pp. crown 4to. (New York, 1906)
net
1
1
0
Turner's Handbook on Screw-cutting, Coning, etc. By W. Price. New impression, fcap. 8vo. (1912)
net
0
6
Introduction to Eccentric Spiral Turning. By H. C. Robinson. 12 plates, 23 illus. 48 pp. 8vo. (1906)
net
4
6
Manual of Instruction in Hard Soldering. By H. Rowell. Sixth edition, 7 illus. 66 pp. crown 8vo. (New York, 1910)
net
3
0
Forging, Stamping, and General Smithing. By B. Saunders. 728 illus. ix + 428 pp. demy 8vo. (1912)
net
11
0
Pocket Book on Boilermaking, Shipbuilding, and the Steel and Iron Trades in General. By M. J. Sexton. Sixth edition, New impression, 85 illus. 319 pp. royal 32mo, roan, gilt edges. (1912)
net
5
0
Power and its Transmission. A Practical Handbook for the Factory and Works Manager. By T. A. Smith. 76 pp. fcap. 8vo. (1910)
net
2
0
Spons' Mechanics' Own Book: A Manual for Handicraftsmen and Amateurs. Sixth edition, New impression, 1430 illus. 720 pp. demy 8vo. (1912)
6
0
Ditto ditto half French morocco
7
6
Spons' Workshop Receipts for Manufacturers, Mechanics and Scientific Amateurs. New and thoroughly revised edition, crown 8vo. (1909)
each net
3
0
Vol. I. Acetylene Lighting to Drying. 223 illus. 532 pp.
Vol. II. Dyeing to Japanning. 259 illus. 540 pp.
Vol. III. Jointing Pipes to Pumps. 257 illus. 528 pp.
Vol. IV. Rainwater Separators to Wire Ropes. 321 illus. 540 pp.
Gauges at a Glance. By T. Taylor. Second edition, post 8vo, oblong, with tape converter. (1900)
net
5
0
Simple Soldering, both Hard and Soft. By E. Thatcher. 52 illus. 76 pp. crown 8vo. (S. & C. Series, No. 18.) (New York, 1910)
net
1
6
The Modern Machinist. By J. T. Usher. Fifth edition. 257 illus. 322 pp. 8vo. (New York, 1904)
net
10
6
Knots, Splices, and Rope-Work. By A. H. Verrill. 148 illus. 102 pp. 12mo. (New York, 1912)
net
3
0
Practical Wood Carving. By C. J. Woodsend. 108 illus. 86 pp. 8vo. (New York, 1897)
net
4
6
American Tool Making and Interchangeable Manufacturing. By J. W. Woodworth. 600 illus. 544 pp. demy 8vo. (New York, 1905)
Weights and Measurements of Sheet Lead. By J. Alexander. 32mo, roan
net
1
6
Barlow's Tables of Squares, Cubes, Square Roots, Cube Roots and Reciprocals, of all Integer Numbers from 1 to 10,000. Crown 8vo, leather cloth
net
4
0
Tables of Squares. Of every foot, inch and 1/16 of an inch from 1/16 of an inch to 50 feet. By E. E. Buchanan. Eleventh edition, 102 pp. 16mo, limp. (New York, 1912)
net
4
6
Land Area Tables. By W. Codd. On sheet mounted on linen, in cloth case with explanatory pamphlet. (1910)
3
6
Tables of some of the Principal Speeds occurring in Mechanical Engineering, expressed in Metres per second. By P. Keerayeff. 18mo, sewed
net
0
6
Calculating Scale. A Substitute for the Slide Rule. By W. Knowles. Crown 8vo, leather
net
1
0
Planimeter Areas. Multipliers for various scales. By H. B. Molesworth. Folding sheet in cloth case
net
1
0
Tables of Seamless Copper Tubes. By I. O'Toole. 69 pp. oblong fcap. 8vo. (1908)
net
3
6
Steel Bar and Plate Tables. Giving Weight per Lineal Foot of all sizes of L and T Bars, Flat Bars, Plates, Square, and Round Bars. By E. Read. On large folding card. (1911)
net
1
0
Rownson's Iron Merchants' Tables and Memoranda, Weights and Measures. 86 pp. 32mo, leather
3
6
Spons' Tables and Memoranda for Engineers. By J. T. Hurst, C.E. Twelfth edition, 278 pp. 64mo, roan, gilt edges. (1907)
net
1
0
Ditto ditto in celluloid case
net
1
6
Optical Tables and Data, for the use of Opticians. By Prof. S. P. Thompson. Second edition, 130 pp. oblong 8vo. (1907)
net
6
0
Traverse Table, showing Latitudes and Departure for each Quarter degree of the Quadrant, and for distances from 1 to 100, etc.; 18mo, boards
net
2
0
Fifty-four Hours' Wages Calculator. By H. N. Whitelaw. Second edition, 79 pp. 8vo.
net
2
6
Wheel Gearing. Tables of Pitch Line Diameters, etc. By A. Wildgoose and A. J. Orr. 175 pp. fcap. 32mo. (1903)
The Atmosphere: Its Characteristics and Dynamics. By F. J. B. Cordeiro. 35 illus. 129 pp. crown 4to. (New York, 1910)
net
10
6
Popular Engineering. By F. Dye. 704 illus. 477 pp. crown 4to. (1895)
net
5
0
The Phonograph, and how to construct it. By W. Gillett. 6 folding plates, 87 pp. crown 8vo. (1892)
5
0
Engineering Law. By A. Haring. Demy 8vo, cloth. (New York.)
Vol. I. The Law of Contract. 518 pp. (1911)
net
17
0
The Gyroscope, an Experimental Study. By V. E. Johnson. 34 illus. 40 pp. crown 8vo. (S. & C. Series, No. 22.) (1911)
net
1
6
Particulars of Dry Docks, Wet Docks, Wharves, etc. on the River Thames. By C. N. Jordan. Second edition, 7 coloured charts, 103 pp. oblong 8vo. (1904)
net
2
6
New Theories in Astronomy. By W. Stirling. 335 pp. demy 8vo. (1906)
net
8
6
The American Hardware Store. A Manual of approved methods of arranging and displaying hardware. By R. R. Williams. 500 illus. 448 pp. royal 8vo. (New York, 1896)
net
7
6
Inventions, How to Protect, Sell and Buy Them. By F. Wright. 118 pp. crown 8vo. (S. & C. Series, No. 10.) (New York, 1908)
net
1
6
The Journal of the Iron and Steel Institute.
Edited by G. C. Lloyd, Secretary.
Published Half-yearly, 8vo, cloth, 16s.net.
Carnegie Scholarship Memoirs.
Published Annually, 8vo, cloth.
The Journal of the Institution of Electrical
Engineers.
Edited by P. F. Rowell, Secretary.
The Proceedings of the Institution of Municipal
and County Engineers.
Edited by Thomas Cole, Assoc. M. Inst. C.E. Secretary.
Published Annually, 8vo, cloth, 21s.net.
The Transactions of the Institution of Mining and
Metallurgy.
Edited by C. McDermid, Secretary.
Published Annually, boards, 21s. net, or half-bound, 25s. net.
Transactions of the Institution of Gas Engineers.
Edited by Walter T. Dunn, Secretary.
Published Annually, 8vo, cloth, 10s. 6d. net.
Proceedings of the International Association
for Testing Materials.
(English Edition.)
Transactions of the American Institute of
Chemical Engineers.
Published Annually, 8vo, cloth, 25s. net.
LONDON: PRINTED BY WILLIAM CLOWES AND SONS, LIMITED.
Transcriber's Note
This book contains a dictionary plus a book advertisements section. The punctation has been homogenized in the dictionary but not in the advertisements. The spelling of some names in the dictionary can differ between the French/English part and the English/French part; this has not been fixed. An alphabetical index was added in the Contents section for the reader's comfort.
The following typos have been fixed in the dictionary:
p55: corrected “concassés” into “concassées”
(“Route en pierres concassées”)
p68: corrected “Rétard” into “Retard” (“Retard à l'allumage.”)
In the advertisements section, for the two book entries “Steel Bar and Plate Tables.”, L and T were set in bold, instead of a distinct font.
Note de transcription
Ce livre contient un dictionnaire, plus une section publicités. La ponctuation a été homogénéisée dans le dictionnaire, mais pas dans les publicités. L'ortographe de certains mots diffère dans le dictionnaire entre les versions French/English et English/French; celle-ci n'a pas été corrigée. Un index alphabétique à été ajouté dans la section Contents pour le confort du lecteur.
Les erreurs suivantes ont été corrigées:
p55: corrige «concassés» en «concassées»
(«Route en pierres concassées»),
p68: corrige «Rétard» en «Retard» («Retard à l'allumage.»).
Dans les publicités, pour les 2 livres intitulés «Steel Bar and Plate Tables.», L et T ont été mis en gras, au lieu d'utiliser une autre police.
