BELT
Cut eight 6 yd lengths of B, four 5½ yd lengths of A, eight 5 yd lengths of D, four 5 yd lengths of C and six 4½ yd lengths of E. Anchor to 1½ inch ring in the following sequence using RDHH; * 2 B, 1 A, 1 C, 2 D, 3 E, 2 D, 1 C, 1 A, and 2 B *. Repeat between *’s for other half of ring. (NOTE: All yarns are worked 2 strands to a length except E which uses 3 strands as one). * Take E, cross strands over each other and carry to outside in DDHH so that the last knot is approximately 1 inch from the ring. (FIRST ROW SHAPING ONLY) Repeat with all colors, leaving lengths used as leaders untied, until B remains in the center. Pick up E and work to center in DDHH. Repeat with all colors, leaving lengths used as leaders untied until B is on the outside. With E tie 6 VHH, with D tie 5 VHH. Using outside B on the left, work to the right forming a HB. Using outside B on the right, work to the left forming a HB *. Repeat between *’s twice having the last knot of DDHH 1 inch below last HB. There will be 3 sections worked in the same manner.