CHOKER
Cut four 1½ yd. lengths each of A, E, D, C. Cut four 2½ yd. lengths of B. Anchor to 1 inch ring, using the RDHH, in this manner: * (one half of the ring) 1 B, 1 A, 1 C, 1 D, 2 E, 1 D, 1 C, 1 A, and 1 B. Repeat from * on other half of ring. (NOTE: All yarns are worked two strands to a length). One half of choker is worked, then the other. * Starting with E, cross them over one another and work in opposite directions in DDHH having last knot 1 inch below ring. Repeat with all colors leaving lengths used as leaders untied until B is in the center. With B tie 3 VHH. Pick up E and work each to center in DDHH. Repeat with all colors, leaving lengths used as leaders untied until B is on the outside. With E tie 3 VHH *. Using outside B on left, work to right forming a HB. Do not tie B onto B. Using outside B on the right work to the left forming a HB. Repeat between *’s once, having the last knot of the DDHH 1 inch below last HB. Using outside B on the left, work to the right forming a HB. With this length and the right outside length of B tie 14 VHH. This will be sewn into place forming a loop. With a yarn needle or crochet hook weave in the ends on the back side for at least ½ inch. Trim. BRAID: Cut 6 one yard lengths of B. Tie all lengths together with an OHK two inches from beginning. Braid, using 2 strands of yarn as one, for twenty inches. Tie an OHK. Cut lengths 2 inches below OHK. Insert braid through loops for fastening.