Essays on the Microscope / Containing a Practical Description of the Most Improved Microscopes, a General History of Insects, etc., etc.

by George Adams

A DESCRIPTION OF THE SEVERAL IMPROVEMENTS MADE UPON MR. ADAMS’S LUCERNAL MICROSCOPE. BY THE EDITOR.

The lucernal microscope being unquestionably the only instrument for exhibiting all sorts of opake objects under a brilliant and magnified appearance, was, as formerly constructed by the late Mr. G. Adams, attended with some inconveniences and imperfections. Upon a proper inquiry into various improvements, and from some observations made by myself, I can recommend, as a complete instrument, one with the following emendations, being, in my opinion, the best of any hitherto made known.

The lucernal microscope, when placed up for use, as represented in Fig. 1. [Plate III.] is of some considerable length. When the eye at L is viewing the image of the object upon the glasses, the objects themselves in the sliders placed at kl at the stage, are without the reach of the hand; so that the indispensible change of the parts of an object, or of one object to another, can only be obtained by the observer’s moving himself from the object to the eye-piece, and vice versa. This adjustment, therefore, proves uncertain and troublesome. The application of rack-work motion to the stage has been contrived and applied to the lucernal microscope by Mr. W. Jones, of Holborn, accompanied with Hooke’s joint and handle, and a lever rod; so that, without altering his position, the observer may change both the horizontal and vertical position of the sliders, and thereby readily investigate all the variety of the objects, and their parts, and with the same exactness as by other microscopes.

For persons who may not wish to be at the expense of the lucernal, as formerly mounted by Mr. Adams, Mr. Jones has altered the manner of its support; which, as well as the other particulars, and the method of using it, may be understood from the following description.

[Plate IX.] Fig. 3, is a representation of the instrument as placed up for use. AA, the top of a mahogany chest, about two feet long, thirteen inches and an half high, and eight inches broad, which serves both as a case to contain the instrument, and to support and preserve it steady when in use. A groove is cut in the top of the box, and another in the inside at the bottom, in both of which the base of the instrument is made to slide. When the instrument is placed inside, a long slip of mahogany slides in at the top, to secure the groove, and make the top perfect. Thus the instrument may be most readily slid out of its case, and then into the groove at top for use, and in much less time than by the brass frame and jointed stand adopted by Mr. Adams. Fig. 3 B, is the stage for the objects, with the condensing lens a, and concave mirror b, the same as in Mr. Adams’s. C, the brass slider case for opake objects, with a rack cut into its lower edge, and which is turned by a pinion. To this pinion is applied an handle, D, with Hooke’s universal joint; this contrivance gives a certain horizontal motion to the objects while viewing. The stage at C is also made to slide vertically, and a lever-rod or handle, E, to apply through the top, to bring the objects to a just height. Hence, by applying the left hand to the handle, E, and the right to the rod D, the adjustment or the changing of the objects, while under exhibition on the large lenses at F, is produced in the most convenient and accurate manner, and the observer has no occasion, for one slider, to shift from his seat or position.

Rack-work might be applied to the vertical motion, but it is not essentially necessary; for when once the center of the slider is observed, there requires very little change from that position for the complete exhibition of the objects. The whole of the stage, with the lense and mirror, is fixed to a brass dove-tailed slider at G, which slides in another brass piece fixed to the wooden slider or base of the instrument. A long brass rod, H, with an adjusting screw at its end, passes through the two brass pillars, K, K, to the stage at f, upon which it acts; and according as it is turned to the right or left hand while examining the objects, moves the objects nearer to or farther from the magnifiers screwed on at L, and produces the just distance for rendering the appearance of the objects the most distinct and brilliant upon the glasses at F.

The management of the light from the lamp, through the lens, a, and from the concave mirror, b, to the objects, is exactly the same as before directed by Mr. Adams. For the exhibiting of transparent objects, the stage, C, is to be slid away, and the body, Fig. 4, applied in its place, in that position, with the large lens outwards next the lamp. The slider with the objects passes through at a, and the focus for the different magnifiers is adjusted by turning the long rod, D, to the right or left, as with the opake objects. In this case the lamp is to be raised to the center of the body of the microscope, or even with the magnifiers at L. The image of the objects may also, as in Mr. Adams’s, be best received on the rough glass placed at F, for the simple reflected light through the body will sometimes be so strong, as to irritate the eye; the operator must, therefore, both modify that from the lamp, and place the roughed glass to his own ease and pleasure. The guide for the eye, N, in this instance is not necessary. Care being taken that the roughed glass at F be kept in as dark a situation as possible, there will be a certainty of a clear and well-defined view of the object.

A tin chimney placed over the glass of the lamp about ten inches long, with a suitable aperture to admit the light to pass through it to the glasses, is of material service; it excludes all superfluous light from the eye of the observer, keeps the room sufficiently darkened, and enables the observer to view his object with the proper brilliancy. As a pleasing relief to the eye, the interposition of a small piece of blue or green glass at the sight hole, N, Mr. Jones has sometimes found necessary, but it gives rather a false teint to the colour of the objects.

In the year 1789 the same artist applied a brass screw pillar and arm to the top of the box at O, on which is occasionally slid the condensing lens, a. The lamp being then applied at the side of the box at O, instead of the end, and the lens, a, moved to such a distance as to give the strongest possible light upon the opake objects at C; they were found to be more strongly illuminated by this simple refracted light than by the refracted and reflected light before used. Light is always somewhat diminished by reflection, although condensed; therefore, as it is sometimes best to view the objects from oblique reflected light, and sometimes from direct refracted, he constructs the apparatus so as to give the operator the means of easily using either. The dotted lines, O P, shew the manner that the glass semiglobe, a, is occasionally applied to refract or converge directly the light from the lamp to the objects on the stage.

It is scarcely necessary to observe to the reader, the propriety of all the glasses of the apparatus being perfectly clean before the observations; for if, after being laid aside some time, or by dust, &c. they should appear soiled, it will be necessary to wipe them previously with a piece of soft shammy leather usually sent in the box for that purpose, or a clean soft cloth. The two large lenses at F, Fig. 3, may be readily separated by turning aside the two brass screws that act upon a brass ring.

From the various ingenious admirers of this sort of instrument, many improvements and alterations have been suggested; among several that have been communicated, those by the two following gentlemen appear to me the most deserving of notice, and which I shall leave to the reader’s judgment and experience.

The Rev. John Prince, LL. D. now of Salem, Massachuset’s States, North America, a valuable correspondent and friend of our late author, transmitted to him an alteration in the construction; and of which I here insert the brief account, in nearly the words given by Mr. Adams.

Dr. Prince applies a strong joint similar to that of a telescope at about the middle of the center part of the pyramidical box, and a sort of adjusting screw at the large end. The joint is nearly in the center of gravity, so that a very small motion is sufficient to bring any object less than an inch in diameter into the field of view. This motion is effected by two screws at right angles to each other; one screw raising or levelling the body, the other moving it sidewise, the screw at the same time forming a double joint to accommodate the parts to the movement.[31]

[31] A figure of this, with an explanation, as recommended by Mr. John Hill, Wells, in Norfolk, may be seen in the Gentleman’s Magazine, Vol. LXVI. 2d part, page 897. In this particular, as well as in the deviation from the parallel position of the glasses to the surfaces of the objects, I think the construction not so simple and perfect, as that by rack-work and pinion applied by Mr. Jones. Probably, Dr. Prince had not, at the time of his contriving the joint-work to the box, seen or heard of the other method. His subsequent contrivances shew real ingenuity; and to the inquisitive in this instrument, will afford much useful entertainment and advantage.

To secure the image formed upon the rough glass more completely from the light, at times essentially necessary, there is a pyramidical mahogany box, of the same size, to pack, when not used, in the body of the microscope; when in use, the broad end of this screen box is to be slid into the groove, from which the exterior cover at the end has been taken. This method is peculiarly useful in the day-time; as, by screening the large lenses from the light, it may even then be used with satisfaction.

One of the large lenses may occasionally be placed on the outer edge of the screen box, the other lens being taken out; the view on the rough glass is by these means magnified, and appears to greater advantage. But, besides the grey glass used in the former construction, there is a second in this, placed farther within the body, about half way; and, when the large lens is in the screen box, objects appear better in this than in the former way. It has a still greater effect upon those who are unacquainted with the nature of lenses, as it makes them judge the distance and magnitude much greater than they really are, and is therefore more pleasing than the grey glass in front. Only one grey glass can be used at a time; both being removed when opake objects are viewed.

The stage, F, Fig. 5, is considerably different from that at C, Fig. 3; it is judged more convenient and commodious than the other, and serves, with a small alteration, for both transparent and opake objects. A truncated cone can also be here applied for cutting off superfluous rays of light occasionally.

The method of illuminating the objects is also different. The mode now adopted answers better for opake and transparent objects, throws a stronger light, and is more convenient in application. It consists of two lenses, 1 and 2, Fig. 5; the larger one is to be placed at the end of the bar next the lamp. The smaller one to be adjusted so as to give a strong light. A third is also added, to be used occasionally with opake objects; it is to be applied close to the large lens. Experience will shew when it is to be used, or not. By moving the bar, G, on which these lenses are placed round the stage pillar, M, you bring it so much fronting the stage as effectually to enlighten opake objects by means of the lamp. The light thus afforded is received directly, and none lost by reflection. The objects are fixed on circular wheels of wood, see Fig. 7, the brass centers of which, are fitted to the hole, b, of the stage, Fig. 5; and about this center they are to be turned by the hand for the changing of the objects.

As some objects, such as sections of wood, are seen to advantage both as transparent and opake, a frame containing a plane and a concave mirror is added to this instrument, serving two purposes: by bringing the bar to the front of the stage, removing the large lens, and putting the mirror in its place, the object may be viewed either way, without moving from the seat, by turning the instrument a little round. This experience will discover. The light of the sun may be thrown by the plane mirror on the condensing lens, so as to produce a strong full field of light on the grey glass. This has a grand effect when the large lens is at the end of the screen box, and could not be applied in this manner in former constructions. It becomes also an opake solar microscope, by turning the bar round to enlighten opake objects.

By bringing the concave mirror to a focus that will burn objects, a set of very curious and entertaining experiments may be made and exhibited on the grey glass. The object for combustion should be put in the nippers, and a piece of slate tied as a ground on the stage. The ebullition of a piece of alum viewed in this manner is very beautiful; the bubbles, as they rise and pass off rapidly, appear tinged with all the colours of the rainbow.

There are large-sized magnifiers for the purpose of throwing transparent objects on a screen, in imitation of the solar microscope. By removing the large lenses in front and the grey glass, and placing the black tin cylinder represented in the drawing by dotted marks, over the lamp, they may be shewn in that manner to several persons; thus, this instrument in a great degree supersedes the use of a lanthorn. The image may be contracted occasionally by one of the large lenses.

The following improvement consists in the manner of applying the lamp, by Mr. Hill. By attaching it to the instrument, it renders the light more permanent and steady, and reduces considerably the bulk as well as the trouble of this appendage, and is to be preferred when the lamp is not wanted separately for other uses or experiments.

H, a brass support to the arm, G, for sustaining the weight of the lamp; it turns round with the bar on the pillar, M. At about I is a brass cap soldered to the above support, and which slips over the slider carrying the larger lens, 2. At K, is a strong joint connected with the said cap, and by which an horizontal motion of the cap is given, when an oblique light is required. To the end of this the lamp is fixed, and in such a manner as to admit of its being easily slid upwards or downwards in a perpendicular direction, to procure the just height of the flame. L is a square brass rod to be occasionally screwed into the reservoir of the lamp, for supporting the tin cylinder screen, when transparent objects are to be represented on a screen in a darkened room.

The transparent microscope, part of the lucernal, is sometimes adapted to a large japanned tin lanthorn, such as represented at Fig. 6. A brass female screw is soldered to the front of the lanthorn, which has a motion upwards or downwards, fitted to the male screw of the transparent microscope. A tall chimney is placed at the top of the lanthorn to conduct the heated air from an Argand’s lamp withinside. The transparent objects in the sliders are magnified by the lenses screwed on at a, and shewn on the screen A; this screen may be about three feet square, of white paper, the objects on which, if represented in a field larger than twelve or eighteen inches, will not be sufficiently vivid.

Mr. Jones has found that a large square glass, from twelve to sixteen inches in the side, rough ground on one of its surfaces, exhibits the objects the best of any other contrivance; answers tolerably well for opake objects, and gives the artist the means of tracing their figure most correctly on its surface. Such sort of objects he fixes upon slips of glass for that purpose, or applies them to a pair of nippers shewn at b, sent with the microscope. A concave silver speculum screws on at c, before the magnifiers, which reflects upon the objects the light that issues from the lamp through the body of the microscope. The least dimensions of the lanthorn are about ten inches square, and fourteen inches high.

This microscope and lanthorn, when made as a separate apparatus from the lucernal, is called the LANTHORN MICROSCOPE. Its effect is considerably short of what is produced by the solar microscope, and not equal to what is much wished for in this manner of magnifying minute objects; see [note], [page 77].

Partly from the improvements just described, Mr. Jones is now constructing a lucernal microscope that he conceives will be the most simple and perfect yet made. It could not be completed in time to be described in this work; but its improvement and advantages will be quite evident to any reader who has attended to the description which I have just given.

DESCRIPTION OF CUFF’S DOUBLE-CONSTRUCTED MICROSCOPE, REPRESENTED AT Fig. 1. [Plate VII. A.][32]

[32] The compound or double microscope is in more general use than any other sort. Besides its being less expensive than the lucernal or complete solar, it is found commodious and portable in the observer’s apartment, when only a confined degree of microscopical pursuit is intended, and that chiefly for a few hours amusement; it may be used both by day and night. In the most improved of this kind the objects appear magnified in a field of view from about 12 to 15 inches in diameter. It is better adapted to transparent than to opake objects, yet the latter may often be viewed to great advantage by the assistance of the sun’s rays or the light of a candle condensed on them. The intelligent reader, by attending to the accounts of the different microscopes described in this work, will be enabled to select that best adapted to the kind of objects he wishes to explore, and the manner in which he is desirous of having them exhibited. Edit.

This instrument was first described by Mr. Baker, and recommended by him. It was also described by my father in the fourth edition of his Micrographia Illustrata, page xix.

A B C represents the body of this microscope; it contains an eye-glass at A, a large lens at B, and a magnifier which is screwed on at C, one of which is represented at Q.

The body of the microscope is supported by the arm D E, from which it may be removed at pleasure.

The arm D E is fixed on the sliding bar F, and may be raised or depressed to any height within its limits.

The main pillar a b is fixed in the box b e, and by means of the brass foot d is screwed to the mahogany pedestal X Y, in which is a drawer containing all the apparatus.

O, a milled-headed screw, to tighten the bar F when the adjusting screw c g is used.

p q is the stage or plate which carries the objects; it has a hole at the center n.

G, a concave mirror, that may be turned in any direction, to reflect the light of the candle, or the sky, upon the object.

A LIST OF THE APPARATUS TO CUFF’S DOUBLE-CONSTRUCTED MICROSCOPE.[33]

[33] This microscope is made oftentimes with a joint at the bottom of the main pillar at e, to admit placing the instrument into any oblique situation, and connected to the bottom of a mahogany chest; on which account, it is by some of the instrument makers called the Chest Compound Microscope. Edit.

H, a convex lens, to collect the rays of light from the sun or a candle, and condense them on the object, or to magnify a flower or other large object placed upon the stage.

L, a cylindrical tube, open at each side, with a concave silver speculum screwed to the lower end h.

P, the slider-holder; it consists of a cylindrical tube, in which an inner tube is forced upwards by a spiral spring, it is used to receive an ivory slider K, which is to be slid between the plates h and i. The cylinder P fits the hole n in the stage: the hollow part at k is designed to receive a glass tube N.

R is a brass cone, to be put under the bottom of the cylinder P, to intercept occasionally some of the rays of light.

S, a box containing a concave and a flat glass, between which a small living insect may be confined; it is to be placed over the hole n.

T, a flat glass to lay any occasional object upon; there is also a concave one u, for fluids.

O, a long steel wire, with a small pair of pliers at one end, and a point at the other, designed to stick or hold objects; it slips backwards and forwards in the short tube o; the pin p fits into an hole m, in the stage for that purpose.

W, a little round ivory box, to hold a supply of talc and rings for the sliders.

Z, a hair brush, to wipe any dust off the glasses, or to take up by the other end a drop of any liquid.

V, a small ivory cylinder, that fits on the pointed end of the steel wire O; it is designed for opake objects. Light-coloured ones are to be stuck upon the dark side, and vice versa.

Y, a common magnifying glass for any occasional purpose.

M, a fish-pan whereon to fasten a small fish, to view the circulation of the blood: the tail is to be spread across the oblong hole at the small end k, and tied fast by means of a ribband fixed thereto; the knob l is to be put through the slit made in the stage, and the tail may be brought under the magnifier.

X is a wire to clean the glass tubes by.

TO USE THIS MICROSCOPE.

Screw the magnifier you intend to use to the end C of the body, place the slider-holder P in the hole n, and the ivory slider K with the object, between the plates h i of the slider-holder; set the upper edge of the bar D E to coincide with the division which corresponds to the magnifier you have in use, and tighten it by the milled nut O; now reflect a proper quantity of light upon the object, by means of the concave mirror G, and regulate the body exactly to the eye and the focus of the glasses by the adjusting screw c g, at the same time you are viewing the object.

To view opake objects, take away the slider-holder P, and place the object on a flat glass u, under the center of the body, or on one end of the jointed nippers o. Then screw the silver concave speculum to the end of the cylinder L, and slide this cylinder on the lower part of the body, so that the upper edge thereof may coincide with the line which has the same mark with the magnifier that is then used; reflect the light from the concave mirror G to the silver speculum, from which it will be again reflected on the object. The glasses are to be adjusted to their focal distance as before directed.

THE DESCRIPTION AND USE OF JONES’S IMPROVED COMPOUND OR DOUBLE MICROSCOPES, REPRESENTED IN Fig. 1 AND 2. [Plate IV.] BY THE EDITOR.

The chief imperfections of Cuff’s microscope, as well as of others formerly made, are, their construction rendering them only compound microscopes, the body of the instrument having but a fixed position over the object, and the smallness of the field of view by the old construction of the glasses in the body. To obviate these defects, as well as for the application of material improvements, the late Messrs. Martin and Adams, and the present Messrs. W. and S. Jones, have constructed this kind of microscope in various ways. Two microscopes by the latter artists, which I am now going to describe, appear to me to be the best of any hitherto invented.

Fig. 1 is a representation of the second best sort of compound microscopes. The improvements, though few in number, are essential to the use thereof. The field of view is considerably larger than in the former microscope. The stage and the mirrors are both moveable, so that their respective distances may be easily varied. The magnifiers may be moved about over the object. There is also a condensing glass, for increasing the density of the light, when it is reflected by the mirror from a candle or lamp. It is furnished with two mirrors, one plane and the other concave, and may likewise be used as a complete single microscope.

A B, Fig. 1. represents the body of the microscope, containing a double eye glass, and a body glass; it is here shewn as screwed to the arm C D, from whence it may be occasionally removed, either for the convenience of packing, or when the instrument is to be used as a single microscope.

The eye glasses and the body glasses are contained in a tube which fits into the exterior tube A B; by pulling out a little this tube, when the microscope is in use, the magnifying power of each lens is increased.

The body A B of the microscope is supported by the arm C D; this arm is moveable in a square socket cut in the head that is connected to the main pillar E F, which is screwed firmly to the mahogany pedestal G H; there is a drawer to this pedestal, which holds the apparatus. This arm may be slid backwards and forwards in its socket, carrying the magnifiers and the body of glasses, and also turned horizontally quite round upon the pillar, giving a general motion all over the object on the stage below; which is a material improvement and advantage of this microscope over a similar one described in the former edition of this work, as any unavoidable motion of the living object to be viewed may be followed, by the observer’s hand moving the arm C D as the object changes its place.

N I S is the plate or stage which carries the slider-holder K, this stage is moved up or down the pillar E F, by turning the milled nut M; this nut is fixed to a pinion, that works in a toothed rack cut on one side of the pillar. By means of this pinion the stage may be gradually raised or depressed, and the object adjusted to the focus of the different lenses.

K is the slider-holder, which fits into a hole that is in the middle of the stage N I S; it is used to confine and guide either the motion of the sliders which contain the objects, or the glass tubes that are designed to confine small fishes, for viewing the circulation of the blood. The sliders and tubes are to be passed between the two upper plates.

L is a brass tube, in the upper part of which is fixed the condensing lens before spoken of; it screws into the wire arm a, which is placed in the hole I of the stage, with the glass underneath, and may be set at different distances from the object, according to its distance from the mirror or the candle.

O is the frame which holds the two reflecting mirrors, one of which is plane, the other concave. These mirrors may be moved in various directions, in order to reflect the light properly, by means of the pivots on which they move, in the semicircle Q, and the motion of the semicircle itself on the pin R; the concave mirror generally answers best in the day-time; the plane mirror combines better with the condensing lens in L, and a lamp or candle at night.

At S is a hole and slit for receiving either the nippers b, or the fish-pan c; when these are used, the slider-holder K must be removed.

T, a hole to receive the pin of the convex lens and illuminator d.

There are six magnifying lenses contained in a brass wheel screwed in a circular brass box P; this wheel is moveable about its center with the finger, and stops by a click when the magnifiers are each centrally under the body A B above, or the hole in the arm C D. They are marked from No. 1, to 6, and the proper number shewn in a small opening made in the side of the brass box. This wheel P screws into the arm C D, and may occasionally be taken off to admit of the silver speculum, or a single magnifier, hereafter to be described.

There is a small line cut on the edge of the arm C D, which must be brought to the right hand edge of its socket, in order to center the magnifier to the body and the stage.

By unscrewing the body A B, the single magnifiers in the wheel P being then only left, the instrument readily forms a single microscope.

A small pocket hand single or opake microscope may easily be extracted from this apparatus. When the body A B is screwed off, and the arm C D slipt away from its frame with the wheel of magnifiers, and the forceps, wire, and joint b applied to it, by a hole made in the arm for that purpose, as represented at V, it is then ready for the examination of any small object that may present itself in the garden, &c. and will be found very convenient whenever the whole instrument is not required.

LIST OF APPARATUS GENERALLY MADE TO THIS MICROSCOPE.

The wheel, with the magnifiers, P. Fig. 1.

The body of the microscope, A B.

The slider-holder, K.

The tube, with the condensing lens L, to be used by candle-light.

The pin and arm a, either for the above lens, or for the silver concave speculum e.

The silver concave speculum e, fitted to the arm above, and used common to all the magnifiers in the wheel and body A B, it is to reflect the light from the concave or plane mirror O below, upon the opake objects, then called the compound opake microscope.

A silver concave speculum f, with a single magnifier; it screws to the under part of the arm C D in room of the wheel of magnifiers, and forms then the single opake microscope.

A brass cone g, to place under the stage N I S, and serves to diminish the reflected light when necessary.

The jointed nippers b, fitted to the stage, to hold any small insect, or other opake object.

A cylinder of ivory h, to fix on the pointed end of the nippers, black on one side and white on the other, to make a contrast to the opake object used.

Six ivory sliders, i, each having four holes, and objects contained between two talcs confined together by brass circular wires. One of the sliders is usually sent without objects, to be supplied at pleasure. When used, they are placed between the perforated plates of the slider-holder K; where also is to be applied the brass frame slider k, containing in one brass piece four small concave glasses fixed; a narrow slip of glass slides over these, all within the frame; so that any very small living object, as a mite, &c., may be viewed with the proper security.

A set of glass tubes, l, three in number, to contain tadpoles, water newts, small frogs, eels, &c. which are curious objects for affording a fine view of the circulation of the blood, &c. They are also to be placed in the slider-holder K. There is a small hole at one end to admit air, the other end is to be stopped with cork, to contain the fluid and prevent the escape of the animal. A brass twisted wire is sent, to assist in the cleaning of these tubes.

A small ivory box, m, containing talcs and wires to supply the ivory sliders with, should any be lost or damaged.

A lens set in a brass cell, n, of such a focus as to view objects under a magnifying power sufficient for the applying them to the instrument for further inspection; hence it has been called the explorator. It may occasionally be screwed to the arm C D, and is then well adapted for viewing objects of the larger kind, or the whole of an insect, &c. before the observing of it in part under the regular magnifiers.

A concave, or a circular plane glass, o, for transparent objects, or animalcula in fluids, &c. it is fitted to the side, I, of the stage.

It is necessary to describe the lens and frame, d, noticed at [page 95]; it is either for converging the sun’s rays upon opake objects laid upon the stage, or for magnifying a flower, or other large objects applied to the stage, or on the nippers or point, b. By its pin and spring socket it is easily raised to any height, for the sun, candle, or the eye of the observer.

A brass insect box, h, consisting of a concave and plane glass that screw close together; by means of which a louse, flea, &c. may be secured, viewed alive, and retained for any time. It is applied to the hole I, of the stage, Fig. 1.

A pair of small brass forceps, q, by which any small object may be conveniently taken up or moved.

This microscope packs into a mahogany pyramidical shaped case, about seven inches square at its base, and fourteen inches in height. For its price, see the general [list] annexed to this work.

TO USE THIS MICROSCOPE.

It will be obvious to the reader from the preceding description that it must be put together as represented in the figure; that he has to place the slider-holder, K, to the stage, N I S, with one slider of objects; to reflect as strong a light as possible from the concave mirror, O, below, by turning it into the best position, and moving it upwards or downwards all the while he is looking down the body, A B. Then, for a distinct view of the object, to turn the pinion, M, in a slow and gentle manner. A small degree of practice will render the management very familiar.

For opake objects, the slider-holder, K, is to be removed; the silver speculum, e, screwed to the arm, a, and by its pin placed in the hole, I, of the stage, with the concave part downward above the stage; the glass, o, or the nippers, b, with ivory, h, placed at the stage: then the light reflected from the mirror, O, up to the speculum above, which will again reflect the light very strongly upon the object. Practice also in this case can make it easy to the beginner. The use of the rest of the apparatus has been sufficiently explained.