PLAN No. 393. MAKING RAISED-LETTER SIGNS
A young man in Detroit, with an invalid mother and two small sisters to support, found it difficult to earn sufficient to meet necessary expenses, until a friend of the family told him of the opportunity afforded for good returns through the making of raised-letter signs by means of an air-pencil outfit. He even loaned the young man $2.50 with which to purchase one of the outfits, and assured him he needed no experience, as a little practice would enable him to become proficient in the work.
These raised letter signs are easy to make, can be produced in any color, in gold, silver, bronze and metallics, are more attractive than embossed work, and can be made and sold at a profit for considerably less than painted signs, as they cost only 1 to 3 cents and sell readily at 10 to 25 cents each, made on cardboard of any color. With a little practice anyone can easily make 50 to 200 of these signs in a day.
The young man took the advice of his friend, bought an air-pencil outfit, and practiced until he had acquired considerable skill in the making of signs. Then he went among the merchants of the city and soon had orders for all the work he could do, at prices that brought him a good income. He closely followed these instructions which come with the outfit:
Mix in a cup or saucer the dry powder and liquid medium which comes with each outfit, to the consistency of thick paste. Use a knife or flat tool in mixing, to crush any lumps that may be in the powder. Unscrew the tube from the bulb—holding the bulb in a vertical position—placing over the opening the funnel, compress the bulb, and while compressed fill the funnel to any desired extent with the paste, then allow the bulb gradually to expand to its natural shape until the paste is drawn in. Remove the funnel and replace the tube and the air-pencil is ready for use. To insure good work, the pencil should not be allowed to touch the article to be decorated.
After using the instrument the tube should be unscrewed and thoroughly cleaned. The bulb should be cleaned by placing it in a basin of water and allowing it to soak until the compound is dissolved. The tube can be cleaned with a small wire.