Equipment
Use jars made especially for home canning so the jars will be the right size for the processing time and temperature used, properly heat tempered, and resistant to mechanical shock. Always check jars before using to be sure they do not have nicks or cracks. Wash jars in hot, soapy water and rinse well.
It is important to use standard jar closures. They are designed to fit home canning jars correctly, and are made from suitable materials to provide a proper seal. One of the most popular types is the two-piece lid with a metal ring or band and a flat metal disk with a sealing compound. Flat metal disks can be used only once since they may not seal properly if reused. Metal bands may be used repeatedly if they are not rusted or dented.
Screw ring band and disk.
Wash and rinse lids and bands. Metal lids with sealing compound may need boiling or holding in boiling water for a few minutes; follow the manufacturer’s directions. Porcelain-lined zinc caps with rubber shoulder rings can also be used to seal jars. Rubber rings should be used only once.
Water-bath canners are readily available on the market. However, any large metal container may be used for a water-bath canner if it is deep enough so the water is well over the tops of the jars and has space to boil freely. Allow 2 to 4 inches above jar tops for brisk boiling. The container or canner must have a tight fitting cover and a rack to allow water to circulate under the jars.
The steam-pressure canner is made of heavy metal and has a cover which fastens to make the pan steam-tight. The cover is fitted with a safety valve, a petcock or vent, and a gage—either weighted or dial. All parts of the canner must be clean and in good working order. Check the gage before the canning season, and also during the season if canner is used often. The weighted ones need only be checked to determine if they are thoroughly clean. A dial gage can be tested for accuracy by a county Extension agent or an equipment manufacturer.
A pressure saucepan may be used for canning pint jars of food. However, 20 minutes must be added to the processing time recommended for a particular food canned with the pressure canner. This is because pressure saucepans heat and cool more rapidly than pressure canners do. Thus additional time is needed to compensate for the otherwise reduced exposure of the food to heat.