Knott’s Counter-high Buttered Pop-Corn Tank

Water jacketed, gas burner, galvanized sheet steel

Retail business where buttered pop-corn is sold fast must handle the making in the way to produce the best buttered pop-corn at the lowest price for materials.

Make by recipe on [page 49]. Mix on Knott’s Pop-corn Mixing Machine and sell from the buttered corn tank where the buttered corn is kept hot by the hot water jacket.

From the time the kettle comes off of the fire to the time the corn is buttered ready for customers, is twelve (12) seconds. That is why this method makes the best, every kernel of pop-corn has a drop of butter on it. Delicious, why, you cannot refuse coming back for more.

Stock No. 2006-1

This paddle is turned and finished from one piece of stock of straight and close grain. Made to our special design, you will find it will take less strokes to mix your batch than is possible with any other.

Stock No. 2009-1

This is the knife to use with racks (Stock No. [2008-1]) for cutting the corn into Bricks, Bars, etc.

It is a quality product. Hand forged from the best grade of cast steel, hand ground and carefully tempered.

Stock No. 2016-7

Individual Motor Drive is the most flexible and economical method of driving pop-corn machines. No shafting, no belts, no dirt or grease.

We have found by experience that this type of motor can be relied on at all times. Cheaper motors may be bought, but they are not cheap to run. Here are the motors you should have:

Also three phase Motors

CHAPTER IV
RAW MATERIALS

MEASURE your raw materials accurately for every batch. Have your color, flavor, salt, butter, etc., put up in bottles or wax paper, the measured quantity for each batch, and thus maintain uniform quality. Buy these of a Confectioners’ Supply House.