Broad Irrigation
Broad irrigation, or sewage farming, is the oldest process of sewage purification, but the constant increase in population has made it necessary for cities to adopt other methods because of the area of land necessary for such a plant. Two processes are used, surface irrigation and filtration, a greater area of land being required for the former. Sometimes the two are combined into one process. For filtration and irrigation the sewage is generally first subjected to sedimentation or screening and then flows on carefully prepared land on which crops are usually grown. The areas are underdrained and are equipped with distribution systems.
Local conditions determine the method of irrigation, the ridge and furrow system being most generally used. The efficiency of the process depends upon the quality of the soil and proper management. Among the factors which should enter into the selection of the site are the quality of the soil, composition of sewage, method of disposal, kind of crops to be planted, contours and slope of surface, nature of the sub-soil, sub-soil waters, transportation facilities, nature of streams, nature of adjacent property, and availability of water supply. The best lands consist of a fine layer of alluvium overlaying a sub-soil of gravel, chalk or other porous material. Various kinds of crops are grown on sewage farms and the revenues therefrom help to reduce the cost of operation. They also assist in the purification. The principal drawback are heavy transportation cost and a prejudice against sewage-grown produce. During the rainy season when the quantity of sewage requiring treatment is greatest, less sewage can be used for irrigation and the growing of crops of sewage farms. All evidence points to the fact that broad irrigation is on a steady decline, although the efficiency of the treatment under favorable conditions is very high.