—Either birch or chestnut are good woods to make your tool chest of. Make the box, that is the lower part of the chest, and the lid for it of ³⁄₄ inch thick stuff; have the box 9 inches high, 12 inches wide and 30 inches long and have the lid 3 inches high, 12 inches wide and 30 inches long. Screw the boards together as nails will not hold tight enough. See [A Fig. 7].
Screw a strip of wood inside the chest for the tray to rest on; put two or three hinges on the box and lid and be particular how you do it or the lid will not fit evenly on the chest. Fasten a staple on front of the box in the middle near the top and a hasp on the cover so that you can put on a padlock, or better you can put on a regular chest lock which is handier and makes a neater looking job. To keep the lid from falling back when you open it, screw a piece of chain about 8 inches long to it and the box and this will serve as a check.
Fig. 7b. the tray for your tool chest
Finally make a tray of ¹⁄₂ or ⁵⁄₈ inch thick wood as shown at [B in Fig. 7]. Make the ends 6 inches high and 6 inches long and saw out the handle grips with your keyhole saw. Make the sides and partitions 4¹⁄₂ inches high and 28¹⁄₂ inches long, screw them together and put on the bottom. By making the tray narrower than the chest you can slide it back and forth and so get such tools out of the bottom as you may need without lifting the tray each time you do so.
Note.—You can buy any tool I have described in this chapter of any hardware dealer or tool supply company in your town or if one is not at hand Hammacher, Schlemmer and Company, corner of Fourth Avenue and 13th Street, New York City, will supply you with just what you want.
CHAPTER II
SCROLL SAWING, WOOD TURNING, WOOD CARVING, ETC.
As you may have observed, it takes a pretty good sized room for a shop and quite a lot of tools to do carpenter work and cabinet making.
Now if you find it hard to get these things don’t be discouraged because there are other kinds of woodwork that take neither a whole room nor a chest of tools, and the chief ones of these are (1) scroll sawing; (2) wood turning; (3) wood carving and (4) pyrography.