The following method was used in making the above analysis. The weighed material was ignited in a platinum crucible by gently heating until the combustible gases formed were given off. The crucible was then more strongly heated to completely burn off the carbonaceous material left. The residue was extracted with nitric acid and the barium precipitated as the sulphate with dilute sulphuric acid, and the weight of the barium sulphate determined.
Expressed as the ACID NUMBER, or the number of milligrams of potassium hydroxide required to neutralize the free acids in one gram of the substance, the following data was obtained:—
| Barium equivalent | .2606 | .1298 |
| Barium expressed as KOH equiv. | .2131 | .1062 |
| Wt. of material used | 1.1715 | .5860 |
| Milligrams of KOH per gram | 181.9 | 181.3 |
| ACID NUMBER | 181.9 | 181.3 |
The following gives the ACID NUMBER obtained by direct titration of the barium acid; in “A”, barium hydroxide was used and in “B”, sodium hydroxide was used.
A small quantity of the material was dissolved in a sufficient quantity of neutralized alcohol to give a liquid of a light yellow color, Phenolphthalein was used as the indicator, and the alkali was added until a red color was produced.
| “A” | “B” | |
| Wt. of substance | .6160 | .2345 |
| Cc. of alkalie | 4.54 | 1.75 |
| KOH equiv. per gram | 41.40 | 41.90 |
| Acid number | 41.40 | 41.90 |
On evaporating a portion of the alcohol from the material left after titrating with the sodium hydroxide, and adding water to obtain an aqueous solution of the sodium salt, an emulsion was formed, and on standing globules of the free resinous acid separated. From the data thus obtained, it can readily be seen that the acid or acids which constitute the BARIUM ACID must have a number of carboxyl groups and form a different series of salts by precipitation than by direct titration. The salt or salts formed by direct titration, although neutral to phenolthalein may be acid in structure. This is further shown by the fact that the potassium salts produced by direct titration are readily hydrolyzed. The acid number obtained by the precipitation of the barium salt may be called the COMBINING VALUE, and the acid number obtained by titration the TITRATION VALUE.
A number of molecular weight determinations were made on the free barium acid. McCoy’s Boiling Point Apparatus was used and Merk’s benzol (free from thiophene) was used as the solvent. A weighing pipette with a bulb was used to introduce the material, the bulb being weighed before the material was introduced into the apparatus, and afterwards, the difference being the weight of the material used.
| Wt. of pipette (before) | 16.3670 | 14.8895 |
| Wt. of pipette (after) | 14.8895 | 12.4610 |
| Wt. of material used | 1.5225 | 2.4285 |
| Original temperature | 3.53 | 3.53 |
| Final temperature | 3.60 | 3.62-3 |
| Change in temperature | .07 | .09 |
| Volume of solution | 37 cc | 43.5 cc |
| Constant for solvent | 3280 | 3280 |
| Approx. Molecular Wt. | 2000 | 2100 or 1800 |
Combustions were made using the barium acids. By qualitative tests it was found that the acids contained only carbon, hydrogen and oxygen. The following gives the results of the combustions.