The following class schedule was designed for one-hour class periods. It has been found from experience that the lessons may be covered in approximately one-hour class periods, except No. 20. Additional study of each lesson will be found profitable where time permits.
| PAGES | ||
| 1. | Keyboard, construction and action; taking off keyboard cam frames; cleaning and oiling keyboard cams, | 3-10 |
| 2. | Taking off keyboard; taking apart and cleaning, | 10-12 |
| 3. | Keyrods, escapements, magazines of various models, | 12-25 |
| 4. | Assembling elevator, assembler, assembler slide, assembler slide brake, | 25-33 |
| 5. | Spaceband box; delivery slide, | 33-42 |
| 6. | Metal pot, mouthpiece, metal pot adjustments, | 42-52 |
| 7. | Pot lever; gasoline and gas burners; pressure, mercury, and thermostat governors, | 52-61 |
| 8. | Electric pot, | 61-68 |
| 9. | Molds, | 68-73 |
| 10. | Distributor bar, channel entrance, distributor screws, distributor clutch plate and stopping bar, distributor clutch; construction of spiral automatic, | 73-80 |
| 11. | Distributor box; matrix lift cam, | 80-87 |
| 12. | First elevator slide and adjustments; first elevator jaws; construction of the connecting link, | 87-94 |
| 13. | Second elevator and adjustments; main cams, | 94-98 |
| 14. | First elevator slide guide; transfer slide adjustments; spaceband lever, pawl, and turnbuckle, | 98-101 |
| 15. | Mold slide; lever and slide; mold disk locking studs and blocks; ejector slide and blade; universal ejector, | 101-107 |
| 16. | Mold knife adjustments; adjustments of trimming knives; knife wiper, | 107-114 |
| 17. | Mold gear arm; mold turning cam; square block; justification levers; vise, vise jaws, pump stop, | 114-122 |
| 18. | Driving shaft, friction clutch and adjustments, vertical lever, upper and lower stopping levers, automatic stopping and safety pawls, stay bolt, | 122-127 |
| 19. | Vise automatic; filling piece and safety lug, | 127-130 |
| 20. | Dismantling and reassembling, under the supervision of the instructor |
Index
- PAGE
- Adjustable Mold, [36]-em, [71]
- Advertising Figures, [132]
- Advertising Mold, [70]
- Assembler, [28]
- Assembler Slide, [31]
- Assembler Slide Brake, [31]
- Assembler Troubles, [33]
- Assembling Elevator, [25]
- Assembling Elevator, to Take Off, [28]
- Auxiliary Lever, [93]
- Auxiliary Magazines, [21]
- Burner, Gas, [55]
- Burner, Gasoline, [55]
- Banking Strips, Mold, [109]
- Cams, Main, [95]
- Carbolite Mold, [71]
- Care of Electric Metal Pot, [65]
- Care of the Machine, [133]
- Causes of Bad Assembling, [33]
- Channel Entrance, [74]
- Chute Spring, [28]
- Class Schedule, Mechanism, [149]
- Cleaning a Magazine, [23]
- Cleaning Matrices, [24]
- Cleaning the Throat of Crucible, [44]
- Connecting Link, First Elevator Slide, [92]
- Cracked Crucible, [44]
- Current Consumption, [67]
- Display Molds, [70]
- Distributor, [73]
- Distributor Bar, [73]
- Distributor Box, [80]
- Distributor Box, Lower, Models 2 and 4, [83]
- Distributor Box, to Remove, [87]
- Distributor Box Matrix Lift Cam, [84]
- Distributor Clutch, [76]
- Distributor Screws, [75]
- Distributor Screw Guard, [76]
- Distributor Spiral Automatic, [78]
- Distributor Stopping Mechanism, [77]
- Distributor Troubles, [84]
- Duplex Rails, [26]
- Duplex Rail Operating Blocks, [99]
- Ejector Blade, [105]
- Ejector Blade, to Change, [105]
- Ejector Guide Block, [105]
- Ejector Slide, [104]
- Ejector, the Universal, [106]
- Electric Metal Pot, Care of, [65]
- Electric Pot, [62]
- Electric Pot Definitions, [61]
- Elevator, Second, [94]
- Ems to Running Inch, [142]
- Escapement Mechanism, [14]
- Facts and Suggestions About Trimming Knives, [112]
- Failure of Matrices to Respond (See Keyboard Troubles), [7]
- Failure of Matrices to Respond (due to Troubles Above the Keyboard), [23]
- Filling Piece, First Elevator, [130]
- First Elevator Jaws, [90]
- First Elevator Jaws and Slide, [87]
- First Elevator Jaw Line Stop, [92]
- First Elevator Slide Connecting Link 92
- First Elevator Slide Guide, [98]
- Friction Clutch, [122]
- Friction Clutch Adjustments, [123]
- Friction Clutch Hints, [126]
- Fuses, [68]
- Gas Burner, [55]
- Gas Burners, to Remove, [58]
- Gas Pot Hints, [57]
- Gasoline Burner, [55]
- Governor, Mercury Gas, [59]
- Governor, Pressure, [58]
- Governor, Thermostat Gas, [59]
- Headletter Mold, [70]
- Hints, Friction Clutch, [126]
- Hints, Gas Pot, [57]
- Hints, Magazine, [24]
- Hints, Mold, [72]
- Justification Levers, [118]
- Keyboard, [3]
- Keyboard, to Take Apart, [10]
- Keyboard Parts, [4]
- Keyboard Cams, Cleaning the, [9]
- Keyboard Cams and Parts, [4]
- Keyboard Cam, to Remove, [6]
- Keyboard Cam Frames, to Remove, [9]
- Keyboard Layout, [9]
- Keyboard Rubber Rolls, [6]
- Keyboard Troubles, [7]
- Keyrods, [12]
- Keyrods, Auxiliary, [13]
- Knife Block, [109]
- Knife Block, Wedge Style, [111]
- Knife, Mold, [107]
- Knife Spring Plate, [111]
- Knife Wiper, [113]
- Knife Wiper, Old Style, [114]
- Knives, Trimming, [109]
- Line Delivery Slide, [39]
- Line Stop, First Elevator Jaw, [92]
- Locking Studs and Blocks, [104]
- Magazines, [15]
- Magazines, Auxiliary, [21]
- Magazines and Escapements, [14]
- Magazine, Cleaning a, [23]
- Magazine Channel Entrance, [74]
- Magazine Hints, [24]
- Magazines, Split, [21]
- Magazine, Removing a, [18]
- Magazines, Removing, New Models, [8] and 14-s-k, [20]
- Main Cams, [95]
- Making Machine Changes, [132]
- Matrix Carrier Belt, [32]
- Matrices, Cleaning, [24]
- Mechanism Class Schedule, [149]
- Mechanical Terms, [136]
- Mercury Gas Governor, [59]
- Metal Pot, [42]
- Metal Pot Adjustments, [49]
- Metal Pot Plunger, [42]
- Metal Pot, Removing a, [54]
- Micrometer Caliper, [140]
- Model K, [22]
- Model L, [22]
- Model 14, Single Keyboard, [13]
- Model 9, [130]
- Molds, [68]
- Mold, Universal Adjustable, [69]
- Mold, Recessed, [69]
- Mold, Display and Headletter, [70]
- Mold, Advertising, [70]
- Mold, Carbolite, [71]
- Mold, [36]-em Adjustable, [71]
- Mold Turning Cam Adjusting Shoes, [115]
- Mold Banking Strips, [109]
- Mold Disk Locking Studs and Blocks, 104
- Mold Driving Shaft Friction Clamp, [116]
- Mold Gears, Retiming, [116]
- Mold Hints, [72]
- Mold Knife, [107]
- Mold, Removing and Replacing, [73]
- Mold Slide, [101]
- Mold Turning Cam, Square Block, and Pinion, [114]
- Mold Wipers, [71]
- Mouthpieces, [45]
- Mouthpiece, to Remove a, [47]
- Plunger, Metal Pot, [42]
- Pressure Governor, [58]
- Point System, [141]
- Pot, Electric, [62]
- Pot Lever, [52]
- Pot Returning Cam Shoe, [53]
- Pump Stop, [121]
- Questions, Test, [143]
- Recessed Mold, [69]
- Releasing Lever, [99]
- Removing a Pot, [54]
- Removing a Magazine, [18]
- Removing a Magazine, New Model 8 and 14-s-k, [20]
- Retiming Mold Gears, [116]
- Safety Lug, Mold Disk, [130]
- Second Elevator Safety Catch, [95]
- Second Elevator, [94]
- Second Elevator Starting Spring, [95]
- Slug Troubles, [54]
- Spacebands, the, [33]
- Spaceband Box, [35]
- Spaceband Box, to Remove, [36]
- Spaceband Box Pawls, to Replace, [38]
- Spaceband Box Pawls and Rails, [38]
- Spaceband Lever, [100]
- Spaceband Lever Pawl, [101]
- Spaceband Troubles, [37]
- Spiral Automatic, [78]
- Split Magazines, [21]
- Spring Plate, Knife, [111]
- Stay Bolt, [127]
- Star Wheel, [29]
- Stuck Slug, Removing a, [107]
- Tabular Attachment, [131]
- Test Questions, [143]
- Things You Should Know, [138]
- Transfer Slide, [99]
- Trimming Knives, Facts and Suggestions, [112]
- Trimming Knives, [109]
- Troubles, Distributor, [84]
- Troubles, Slug, [54]
- Thermostat Gas Governor, [59]
- Throat and Mouthpiece Heaters (Electric), [64]
- Universal Adjustable Mold, [69]
- Universal Ejector, [106]
- Verge, to Remove a, [23]
- Vise, the, [119]
- Vise Automatic, [127]
- Vise Jaws, [121]
- Vise Justification, [118]
Transcriber’s Notes
- pg 13 Changed: On the later models 1
to: On the later model 1 - pg 26 Changed: there is assembled in the front
to: there are assembled in the front - pg 28 Changed: pull the gib off dowel pins
to: pull the gib off dowel the pins - pg 30 Changed: remove the chute spring, if the new style, release
to: removing the chute spring, if the new style, releasing - pg 32 Changed: the operating lever when raised
to: the operating lever, when raised - pg 33 Changed: properly, worn detaining plates.
to: properly, or worn detaining plates. - pg 33 Changed: bind; assembler slide worn or dirty
to: bind; or assembler slide worn or dirty - pg 40 Added period after: elevator is raised to send in a line
- pg 49 Changed: lips of the crucible, by driving
to: lips of the crucible by driving - pg 51 Changed plunger pin has been removed, to prevent accidentaly to: accidentally
- pg 57 Changed The hole can be peaned to: peened
- pg 63 Changed controlled by an adjustable dynamic therometer to: thermometer
- pg 68 Changed have a flexibility that requires a varitey to: variety
- pg 70 Changed The cap is construsted to: constructed
- pg 70 Changed The groves in the cap to: grooves
- pg 75 Added the word “the” to: screws are in front of “the” distributor
- pg 81 Changed drawn out a little by peaning to: peening
- pg 84 Changed annoyance and lost time is causd to: caused
- pg 91 Changed The duplex rail sometimes become to: becomes
- pg 106 Changed starting and stopping lever and is conected to: connected
- pg 108 Changed: is should scrape the lead from the mold.
to: it should scrape the lead from the mold. - pg 109 Changed allows for a range form to: from
- pg 112 Changed adjustment if dirt or gum interfers to: interferes
- pg 115 Removed repeated word from: cam and bank against the the shoes.
- pg 129 Changed forced out of action by the vise matic to: automatic
- pg 130 Changed interchangeable magazines, any-one to: any one
- pg 131 Changed operated by the usual keyboard machanism to: mechanism
- pg 135 Changed Test the vice-automatic to: vise-automatic.
- pg 139 Changed Do not change adjustments everytime to: every time
- pg 140 Changed The speed of the machine should be uniform at all tims to: times
- pg 140 Changed for flucuations will interfere to: fluctuations
- pg 143 Removed extra quote from: one matrix dropping, or ‘“running away.”
- pg 143 Changed gone through to change a magzine to: magazine
- pg 143 Changed: How are the rubber roll taken out
to: How is the rubber roll taken out - pg 143 Changed: How change the middle magazine
to: How to change the middle magazine - pg 144 Changed: How adjusted on both old and new styles
to: How is it adjusted on both old and new styles - pg 145 Changed: How replaced and adjusted
to: How is it replaced and adjusted - pg 145 Changed What does a smoth, bright bottom on a slug indicate to: smooth
- pg 145 Changed Explain throughly the care of the gas burner. to: thoroughly
- pg 151 Added word the to: keylevers; the keybar banking bar
- Normalized spelling of vice to vise throughout book.