The net itself, figure 31, must have a welting all around it, doubled so as to form a groove for the reception of the rods. In the center of the upper part or point it must have a small piece of chamois leather, so as to form a kind of hinge; this must be bound round the welting and divided in the middle, so as to prevent the cross pieces from slipping over each other; it shows about four inches of the gauze turned up, so as to form a bag; there are strings for the purpose of passing through the staple, to which the net is firmly drawn on each side. When the net is used a handle is to be held in each hand.
If it is intended to take insects on the wing, by means of this net, for which it is admirably adapted, it may be folded together in an instant. If the gauze is fine enough, and preserved whole, even the smallest insect cannot escape. It may be also applied in catching coleopterous insects, which are never on the wing, as well as caterpillars. When used for this purpose the entomologist must hold it expanded under trees, while another must beat the branches with a stick. Great numbers of both insects and larvæ will fall in the gauze, and by this means many hundreds may be captured in a day.
Another method is to spread a large table-cloth under trees and bushes, and then beat them with a stick. An umbrella reversed has frequently been used for the same purpose. Bose, the celebrated naturalist, used this last method—he held the umbrella in the left hand, while he beat the bushes with the other.
The Hoop or Aquatic Net, Figure 26. This net is used for capturing aquatic insects, which are either lurking at the bottom, swimming through the liquid element, or adhering to plants. It may also be successfully used in sweeping amongst grass and low herbage for coleopterous insects and others which are generally to be found in such situations. The socket, for the handle, may be made of such dimensions as will answer the second joint of the entomological net-rod, which will save carrying another handle; or a walking-stick may be made to fit it.
A Phial, Figure 33. This may either be made of tin or crystal, and used for collecting coleopterous and other creeping insects. The mouth should be nearly an inch wide, and a cork exactly fitted to it, in the center of which must be inserted a small quill, to afford air, and inserted about an inch beyond the cork, to prevent the insects from escaping. If the bottle is made of tin, and of a larger size, a tin tube must be introduced into its side, and terminating externally at the surface.
A Digger, Figure 28. The instrument is either made of iron or steel, and is about six or seven inches in length, fixed into a turned wooden handle. It is used for collecting the pupæ of lepidopterous insects, at the roots and in the clefts of the bark of trees; and also for pulling off the bark, particularly from decayed trees, under which many curious and rare insects are frequently found. It is most useful with an arrow-headed point.
Setting Needles, Figure 29. Fitted into a small wooden handle, the needle itself should be about three inches long, and about the thickness of a small darning-needle, slightly bent from about the middle. Figure 30 is a straight needle which is used for extending the parts of insects; at one end of the handle is the needle, and at the other a camel-hair pencil, which is used for removing any dirt or dust which may be on the insects. The pencil may be occasionally drawn through the lips, brought to a fine point, and used for disposing the antennæ and palpi of insects of the minute kinds.
Brass Pliers, Figure 25. These are used for picking up small insects from the roots of grass, etc. They may also be used for laying hold of small insects, while they are yet free and not set up.
Fan Forceps. This very useful instrument to the entomologist, must be made of steel or iron, and about eight or ten inches in length; its general construction is like that of a pair of scissors, and it is held and used in the same manner. Towards the points are formed a pair of fans, which may either be square, oval, hexagonal, or octagonal in the edges, and the centers covered with fine gauze. The general size of the fans is from four to six inches. These are used for capturing bees, wasps, and muscæ. They are also used for catching butterflies, moths, and sphinges. If an insect is on a leaf, both leaf and insect may be inclosed within the fans; or if they are on a wall or the trunk of a tree, they may be very easily secured by them.
If a butterfly, sphinx, or moth, are captured by the forceps, while yet between the fans, they should be pressed pretty smoothly with the thumb-nail, on the thorax or body, taking care, however, not to crush it. It may then be taken into the hand, and a pin passed through the thorax, and then stuck into the bottom of your hunting-box.