In broadleaved forest, besides the selection forest, the natural result of the sprouting capacity of the hardwood had led to a coppice method which was extensively relied upon for fuel production. This was rarely, however, a simple coppice, for, intentionally or unintentionally, some seedlings or sprouts would be allowed to grow on, leading to a composite forest and finally to a regular coppice with standards (1569, etc.), with an intentional holding over of the valuable oak and ash for standards. Probably, however, large areas of unconsciously produced composite forest exhibited sad pictures of branchy overwood with suppressed underwood of poor sprouts, injured by game and cattle—a scrubby growth, into which crept softwoods of birch and aspen. Attempts at pruning such scrub growths into shape on quite an extensive scale are on record.

The recognition that more wood per acre could be secured by lengthening the rotation of the coppice, which seems to have been mostly twelve years or less, led to twenty and thirty year turns and finally to fifty, sixty and even eighty year rotations or so-called polewood management (Brunswick, 1745), also called Hochwald (high forest).

A full description and working plan for such a forest to be managed in eighty year rotation, the city forest of Mainz in the Odenwald and Spessart mountains, dates from 1773, and this polewood forest management became quite general after the middle of the 18th century, but in the last half of the 19th century it was generally replaced by the true high forest management under nursetrees, the experiences with the natural reproduction of conifer forest having proved the advantages of this method.

The primitive beginnings of this so-called Femelschlag method (Compartment selection or shelterwood method) are found, in 1720, in Hesse Darmstadt, where Oberforstmeister von Minnigerode prescribed regular fellings progressing from north to south, in which all material down to polewood size (in selection or virgin forest) was to be removed, excepting only a number of clean boles, one every ten to twelve paces being left for seed and nursetrees. The good results in reproduction stimulated owners of adjoining estates to imitate the method (1737).

The observation that in beech forest the young crop needed protection and succeeded better when gradually freed from the shade of the seed trees, especially on south and west aspects where drought, frost and weeds are apt to injure it on sudden exposure, led to the elaboration of the principle of successive fellings.

In the ordinance of Hanau, as early as 1736, three grades of fellings were developed, the cutting for seed, the cutting for light, which was to begin when the young crop was knee-high, and the removal cutting when the crop was high.

This method spread rapidly and was further developed by the addition (in 1767) of a preparatory cutting, to secure a desirable seedbed, and by lengthening the period of regeneration and elaborating other detail, so that, by 1790, the principles of natural regeneration under nursetrees for beech forest were fully developed in Western Germany.

In other parts, hardwood forest management was but little developed. The Prussian Forest Ordinance of 1786 contented itself with forbidding the selection method, by declaring natural regeneration, as practiced in the pineries, not applicable; while the Austrian Ordinance of 1786 recognizes only clearing followed by planting as the general rule.


b. Artificial Reforestation. Although sporadic attempts at sowing and planting are on record as early as the beginning of the 14th century, extensive artificial reforestation did not begin until the middle of the 18th century, by which time planting methods were quite fully developed.