The Italian and Spanish rapiers were sometimes of great length, three feet or three feet six inches and more in the blade, and they were often beautifully finished, the work of the hilts being frequently both elaborate and costly. The blade itself, which was double-edged and inclined to be flat, tapered gradually from hilt to point, and was strengthened by a ridge running almost its entire length.
The French duelling-sword of modern days is sometimes spoken of as a “rapier;” but this is incorrect, as the popular Gallic dispute-settler is three-sided, and is, as it has no edge, exclusively used for pointing.
For details of historical research, and other particulars, the reader is referred to Mr. Egerton Castle’s work on the sword.
The Modern Cut-and-Thrust Sword.
The word “Broad-sword” may be taken to include all kinds of cut-and-thrust swords. It is the generic term for ship’s cutlass, infantry sword, and heavy cavalry sabre, which are all cutting weapons, and, though varying in length and curvature of blade, can be used for pointing.
Fig. 14.—Grip for the light cutlass.
The method of holding the broad-sword depends entirely upon the weight and length of the blade. If you have a light cutlass weighing, say, about one and a half pound, and measuring about thirty-four inches in the blade, you may hold it in the same way as in single-stick play, viz. with the thumb on the back of the hilt, as in the sketch, and you will probably find that in this way the guards are made with greater facility. At the same time, when guarding, say, with the hanging guard (see [Fig. 15]), the thumb is liable to a severe sprain; and this is more particularly the case when the opposing blade meets the foible, or half nearest the point of your blade, at right angles, or nearly so.
To be more explicit. If A B C, in [Fig. 16], represent your blade lying flat on the paper, d o the intersection of a plane at right angles to the plane of the paper and also at right angles to the tangent to the curve at the point o, where we will suppose the edges of the blades to meet, it will be seen at a glance that the leverage from o to C is considerable, and that a great strain is thrown upon the thumb which is endeavouring to keep the guard in position.