Fig. 7—Once you set the axis indicator as shown by dotted fingers, each cylindrical lens in the instrument automatically positions itself exactly at that axis, as indicated by the arrow.
By merely setting the Ski-optometer’s axis indicator ([Fig. 7]), each cylindrical lens in the instrument automatically positions itself, so that it will appear at the opening at the exact axis indicated.
This is readily accomplished by placing the thumb on the small knob, or handle of the axis indicator, drawing it outward so as to release it from spring tension. The indicator may then be set at any desired axis; and, on releasing the handle, every cylinder in the instrument becomes locked, making it impossible for any lens to appear at an axis other than the one specified by the indicator.
This insures the absolute accuracy of the axis of every cylinder as it appears before the patient’s eye. Subsequent shifting of the axis even to a single degree is impossible, although it is a common occurrence where trial-case lenses are employed.
Obtaining Correct Focus
After setting the axis indicator, the only remaining move is to obtain the correct cylindrical strength or focus. This is readily accomplished by merely turning the Ski-optometer’s larger or extreme outer single reel, which contains concave cylindrical lenses from .25D to 2D in quarters ([Fig. 8a]). It should again be borne in mind that a downward turn increases concave cylinder power, while an upward turn decreases it. The operation of the cylinder reel is greatly facilitated by carefully noting position of thumb and index finger ([Fig. 8]). Thus accuracy of result, simplicity of operation and the saving of much valuable time is invariably assured.
Fig. 8A—Inner cog-wheel construction, showing arrangement of Ski-optometer cylinders. This simple construction assures accuracy and avoidance of the slightest shifting of axes.
As each cylinder appears before the patient’s eye, it simultaneously registers its focus at the indicator marked “CC CYL” shown in [Fig. 8]. Examinations of greater accuracy could not possibly be made than those obtained through the Ski-optometer, hence no refractionist should hesitate to employ it throughout an entire examination—wherever trial-case lenses are used.
The range of the Ski-optometer’s cylinder lens battery includes up to 2D. in quarters. An axis scale and a cell is located at the back of the instrument for insertion of an additional trial-case cylinder lens, when stronger cylindrical power is required. For example, if an additional -2D. cylinder is added, it will increase the range up to 4D. cylinder; or if twelfths are desired, a 0.12D. cylinder lens may be inserted. In this connection, it is interesting to note that considerable experimenting with twelfths in the Ski-optometer proved them to be needless, inasmuch as the instrument’s cylindrical lenses set directly next to the patient’s eyes overcome all possible loss of refraction, as explained in a later paragraph.