The miscellaneous brushed sherds appear to have come, by and large, from jars with outcurved rims, the bodies brushed vertically and the rims brushed horizontally. The body and rim areas were probably separated in most cases by a horizontal row of closely spaced punctations made with the end of a stick, and similar rows of punctations were placed on some rims just below the lip at the top of the brushed zone. The juncture of the body and the rim usually formed a distinct angle. There is the possibility that some vessels with brushed bodies had plain or incised rims, or, conversely, that some with brushed rims had plain or incised bodies. The horizontally brushed rims, some with punctations, are quite similar to the rims of type Pease Brushed-Incised, and it is quite likely that some of the brushed sherds came from Pease vessels. It is also possible that some of the brushed body sherds are from vessels with incised rims of the Maydelle Incised type (Suhm et al., 1954: 324 and Pl. 46) described later.
Incised Pottery
Thirty-nine sherds with incised lines were found at the Harroun Site, 31 of them body sherds and the other eight from rims. The incised sherds are all sherd tempered with varying amounts of sand included in the paste. Bone tempering is also present in eight. Surface colors are predominantly light browns and grays, indicating an oxidizing atmosphere during firing. The characteristic surface treatment of the exteriors is smoothing (done before incising), and all the interiors are smoothed. Wall thickness varies from 4 to 8 mm. Two sherds have red slips.
Eleven of the incised sherds have vertical or diagonal appliqué strips marking off the vessel body into panels, each panel being decorated with parallel incised lines ([Fig. 13], E-F). These have all the characteristics of Pease Brushed-Incised body sherds, and they have all been assigned to that type.
One sherd ([Fig. 14], E) with punctation-filled incised panels is unmistakably from a bowl of type Crockett Curvilinear Incised of the Alto Focus, Gibson Aspect (Newell and Krieger, 1949: 98-101 and Fig. 36). This sherd has a straight rim with a squarish lip; the exterior was smoothed before decorating and the interior is poorly smoothed. Decoration consists of a portion of one curvilinear panel outlined with incised lines and filled with small, crescentic punctations. Part of a crack-lacing hole is retained on one edge of the sherd. This specimen was found in a disturbed area at Mound B.
A sharply incurving rimsherd ([Fig. 13], H) with four parallel incised lines in the broad, flat lip is from a vessel which was not of traditional Caddoan shape or decoration. It was found over four feet deep in Zone IIb of the floodplain near Mound A. The incurving rim, the flat lip, and the position of the incised lines are all quite similar to styles of the Lower Mississippi Area—especially as exemplified by the types Coles Creek Incised and Chase Incised (Ford, 1951: 74-77). Another interesting feature of this sherd is a bright red slip which covers both the interior and the exterior surfaces.
A second sherd ([Fig. 13], I) with characteristically Lower Mississippi design is also from Zone IIb of the floodplain. This sherd came from the neck area of a jar and has portions of a decorated rim and a plain body. The decoration consists of two sets of parallel lines crossing each other at an angle so as to form a series of diamond-shaped elements. Inside each diamond is a triangular punctation made with the corner of an angular instrument. There is an abrupt decrease in wall thickness at the bottom of the rim so that a typically Lower Mississippian “overhanging line” effect is produced. In design and general execution this sherd is similar to the type Beldeau Incised (Ford, 1951: 81-83) of the Coles Creek period in the Lower Mississippi Area, but its paste appears to be more in the Caddoan than in the Baytown tradition.
The 25 incised sherds not assignable to any specific type comprise five rimsherds and 20 body sherds. Fifteen of the body sherds bear thin lines sliced into the plastic clay with a sharp instrument; the other 10 were incised with a blunt-tipped implement which gouged out, rather than sliced, the lines. Two sherds ([Fig. 14], G) have a horizontal row of closely spaced punctations in the neck area. Of the five rimsherds, one has three widely spaced, horizontal, incised lines; three ([Fig. 14], F) have a design of widely spaced, cross hatched incised lines; the fifth bears traces of two horizontal incised lines on the lower part of the rim above a plain body. Some of the smaller body sherds could have come from Pease Brushed-Incised vessels and the three rimsherds with cross hatched design could well be from Maydelle Incised vessels.
Thus the 39 incised sherds include at least 11 from vessels of type Pease Brushed-Incised, one is type Crockett Curvilinear Incised, and two appear to be intrusions from the late Coles Creek period of the Lower Mississippi Area. The unidentified sherds are all typically Caddoan in their general characteristics, and three of them may represent type Maydelle Incised of the Frankston Focus.