The decorative technique of appliquéing occurs commonly at the Harroun Site, principally in combination with brushing and incising on the type Pease Brushed-Incised described above. However, there are five sherds with appliqué strips but with no traces of brushing or incising ([Fig. 14], J). Paste characteristics of these sherds are the same as for the previously described appliquéd sherds of the Pease type, and it is believed that they are from vessels similar to Pease Brushed-Incised except that the panels on the body were left plain instead of being filled with brushing or incised lines.
Punctated Pottery
As stated in previous sections, horizontal rows of punctations occur commonly in combination with brushing on the rims of jars, and punctations also appear in vertical rows on appliqué strips applied to the bodies of Pease Brushed-Incised jars. Thus punctations seem to occur most commonly in association with incising, brushing, and appliquéing. However, eight sherds have punctations as the only decorative technique. Four of them have sections of single rows of closely spaced punctations, all made with the ends of sticks or similar implements ([Fig. 14], H). The other four sherds ([Fig. 14], I) are covered with small, free punctations. On one of the latter the punctations were made with a blunt stick; the other three have paired fingernail impressions.
The punctated sherds are all similar in paste characteristics. All are sherd tempered and one also has a small amount of bone temper. Exterior colors are light to medium brown and gray, while the interiors tend toward darker shades of the same colors. The exterior surfaces were smoothed before the punctations were applied; the interiors are also smoothed.
The punctated sherds are not distinctive enough for typological identification.
Engraved Pottery
Only two complete pottery vessels were found at the Harroun Site, a carinated bowl and a bottle, both engraved and both associated with the burial beneath Mound A.
The carinated bowl ([Fig. 12], B) has a flat, round base and a compound rim which turns sharply inward at the shoulder to form a narrow, almost vertical panel approximately 1.5 cm. high. Above this panel the rim turns sharply outward to form a second panel extending to the lip. Four equally spaced peaks rise from the upper panel of the rim. The bowl stands 9.5 cm. high and measures 21.0 cm. wide between opposing rim peaks. Both the exterior and the interior surfaces have been well smoothed, and marks of the smoothing tool are clearly visible both inside and outside the vessel.
The lower rim panel of the carinated bowl bears a stylized version of the interlocking scroll design, featuring broad, deep, engraved lines with small excised zones. The upper rim panel has elongated triangular designs on the rim peak areas with broad, parallel, vertical, engraved lines within the triangles. An almost identical bowl is pictured by Suhm et al., (1954: Pl. 57, I) as an example of the type Ripley Engraved.
The engraved bottle ([Fig. 12], C) has a broad, squat body and a tall neck with expanded rim. Total height is 23.1 cm. The body is 12.8 cm. high by 18.3 cm. wide; the height of the neck is 10.3 cm., its minimal diameter is 4.5 cm., and the oral diameter is 5.5 cm. An interlocking scroll design is repeated twice (slightly asymmetrically) on the body, and some of the engraved lines have small, pendant triangles which are hachured or excised. There are also several cross hatched, triangular elements. The exterior surface is dark gray in color and has been well smoothed. The bottle has been identified as an example of type Ripley Engraved (Suhm et al., 1954: 346 and Pl. 59).