DETAILED STRIPPING.
Buttstock Group.
It is best never to strip this group, but if found necessary, the screws securing buttplate and butt tang to buttstock are readily removed.
Receiver Group.
See that the feed operating arm is pushed to the right, then pull back and remove feed cover.
Feed Cover.—From the feed cover the stop pawl, rebound pawl and cartridge guide spring are readily removed with the point of a bullet.
Back Sight.—The back sight may be stripped from feed cover by removing bed spring screw.
Feed Operating Arm.—Remove feed operating arm complete, by pushing forward on feed operating arm latch and then lifting clear of magazine post. The feed pawl and feed pawl spring are removed from feed operating arm by lifting them clear of the studs. The latch should not be removed.
Ejector.—With the point of a bullet lift and pull out ejector cover and the ejector.
Safety.—The safeties may be prised out of the receiver with a bullet point.