Gear case hinge pin and centre key are permanently assembled and should not be removed.
Gear Casing.—Push forward and remove receiver lock pin and unhook gear casing from gear case hinge pin.
Mainspring Group.
To strip completely the parts assembled in gear casing, raise the gear stop with the point of a bullet, and allow mainspring to unwind.
Gear.—Then unscrew the collet pin and shake out gear.
Mainspring.—Pushing with a bullet through the gear against mainspring collet forces out mainspring casing from which mainspring, with its locating rivets and mainspring collet, may also be removed by the use of a bullet.
Gear Stop.—The gear stop and gear stop spring should not be stripped, but in case of necessity they may be removed by driving out the gear stop pin.
Guard Group.
The assembled guard contains trigger mechanism and butt latch. To strip, punch out trigger pin and sear pin.
Trigger.—Pull back trigger and lift out.