| Moisture, | 11.89 | percent |
| Protein, | 8.75 | „ |
| Ether extract, | 1.58 | „ |
| Ash, | 1.85 | „ |
| Fiber, | .52 | „ |
| Starch and sugar, | 75.41 | „ |
| Calories per gram, | 3,854 |
The above is the composition of a white flour more finely ground and bolted than is advisable for palatable purposes. In the grinding of the above flour the germ which contains a greater part of ether extract is eliminated and also a large quantity of the bodies rich in protein. The composition of a less highly refined flour and one which is more palatable and more nutritious is given in the following data:
| Moisture, | 11.19 | percent |
| Protein, | 9.81 | „ |
| Ether extract, | 2.33 | „ |
| Ash, | 1.53 | „ |
| Fiber, | .73 | „ |
| Starch and sugar, | 74.41 | „ |
| Calories per gram, | 3,954 |
Milling Process.
—In the preparation of the so-called highest grade of buckwheat flour, that is, that which is most carefully ground and thoroughly bolted, the process employed is as follows: During the process of milling the buckwheat grains pass to a receiving separator which removes all the coarse particles, stones, straws, etc., by means of a series of sieves. At the same time any dust which they contain is blown out by a current of air. The sifted grains pass next to the scouring machines, in which they are thoroughly scoured, cleaned, and polished. From these machines the grains pass to a separator containing magnets, by means of which any pieces of metal, in the form of nails, screws, pieces of wire, etc., are removed.
The grains next pass through a steam dryer for removing the greater portion of the water employed for the scouring. As soon as they are dry they are again treated to a blast of air, which removes any dirt, dust, or light particles which may have been detached during the process of drying. The grains next pass to the shelling rolls, where the greater part of the outer hulls is removed. This process is accomplished by means of an apparatus which is called a sieve scalper. After the separation of the outer hulls the residue of the material passes to a drying chamber, where the moisture is reduced to about 10 percent, thus insuring the keeping qualities of the flour. After drying the grains are ready for the rolls. After entering the rolls the process is practically the same as that which is employed in milling wheat, consisting of a series of breaks and reductions, with the attendant bolting and grading, and this process is prolonged until the flour is practically removed from the feed or middlings. The sifting cloths used in the bolting of buckwheat flour are somewhat coarser than those for wheat, and this allows some of the dark particles of the inner hulls to pass into the flour, which gives it a dark color on baking. It is quite possible to make a buckwheat flour as white as that from wheat, but in this country the public taste requires a darker product, so that the white flour does not readily sell. The requisite degree of darkness is secured by using bolting cloths which will allow a part of the inner hulls (middlings) to pass into the flour. Two grades of flour are generally produced—a whiter one in which finer cloths are used, and a darker flour made by using coarser bolting cloths, allowing larger quantities of middlings to pass through. The outer hulls which are first removed are used for fuel, although from their composition it is seen that they contain a large quantity of carbohydrates and might be very profitably used in connection with some highly nitrogenous food, such as cottonseed meal or flaxseed meal for feeding cattle. The middlings are used principally as cattle food, and especially by dairymen.
The above process, while it makes a white and fine-looking flour, is not to be compared with the meal made in the old-fashioned way of grinding between stones and separating the principal part of the outer hull by bolting. This old-fashioned flour is more nutritious, that is, it contains more fat and protein, has a greater fuel value, or in other words has a greater number of calories and makes a much more palatable cake than the fine modern flour.
Buckwheat Cakes.
—Buckwheat cakes are prepared from batter made by mixing buckwheat flour into a paste of the proper consistency, seeding it with yeast, and allowing it to remain in a moderately warm place until fermentation takes place. The proteins of buckwheat have some agglutinating power, and thus, when treated as above, make a cake capable of a considerable degree of aeration. Baking powders are often used as a substitute for yeast and permit of preparation in a few minutes instead of waiting for the fermentation above mentioned. The product made in this way cannot be considered so palatable or nutritious as the old-fashioned product. The batter is baked on a smooth hot iron or soapstone, polished and kept bright in order to prevent the sticking of the cake. The proper polishing of the iron is a better means of preventing sticking than greasing. The batter is poured over the smooth iron and is of a consistency to flatten out without help and to form a film over the baking iron, which produces a cake about one-fourth of an inch in thickness. The cake is to be turned as soon as the side in contact with the iron is brown. It is evident that in this baking process there can be no very profound change in the starch granules, but this does not appear to materially interfere with the digestibility of the product. Buckwheat cakes are eaten hot, usually with butter and sirup. Maple sirup, sorghum sirup, or cane sirup in a pure state are highly prized for use with buckwheat cakes. These sirups are both condimental and nutritious. Mixed sirups made of glucose, melted brown sugar, or molasses, or mixtures of all these bodies are more commonly furnished to the consumer than the pure sirup mentioned above. Honey is also used very extensively as a condimental flavor for cakes of this kind.