An Introductory Course of Quantitative Chemical Analysis / With Explanatory Notes - Henry Paul Talbot

Temperature Density. Volume.
Centigrade.

4° 1.000000 1.000000 15° 0.999126 1.000874 16° 0.998970 1.001031 17° 0.998801 1.001200 18° 0.998622 1.001380 19° 0.998432 1.001571 20° 0.998230 1.001773 21° 0.998019 1.001985 22° 0.997797 1.002208 23° 0.997565 1.002441 24° 0.997323 1.002685 25° 0.997071 1.002938 26° 0.996810 1.003201 27° 0.996539 1.003473 28° 0.996259 1.003755 29° 0.995971 1.004046 30° 0.995673 1.004346

Authority: Landolt, Börnstein, and Meyerhoffer's !Tabellen!, third edition.

CORRECTIONS FOR CHANGE OF TEMPERATURE OF STANDARD SOLUTIONS

The values below are average values computed from data relating to a considerable number of solutions. They are sufficiently accurate for use in chemical analyses, except in the comparatively few cases where the highest attainable accuracy is demanded in chemical investigations. The expansion coefficients should then be carefully determined for the solutions employed. For a compilation of the existing data, consult Landolt, Börnstein, and Meyerhoffer's !Tabellen!, third edition.

Corrections for 1 cc.
Concentration. of solution between
15° and 35°C.

Normal .00029
0.5 Normal .00025
0.1 Normal or more dilute solutions .00020

The volume of solution used should be multiplied by the values given, and that product multiplied by the number of degrees which the temperature of the solution varies from the standard temperature selected for the laboratory. The total correction thus found is subtracted from the observed burette reading if the temperature is higher than the standard, or added, if it is lower. Corrections are not usually necessary for variations of temperature of 2°C. or less.

INTERNATIONAL ATOMIC WEIGHTS