Every-day Science: Volume 6. The Conquest of Nature

by Henry Smith Williams; Edward Huntington Williams

"An admirable and most forcible way to drive up water by fire; not by drawing or sucking it upwards, for that must be as the philosopher calleth it, intra sphæram activitatis, which is but at such a distance. But this way hath no bounder, if the vessel be strong enough: for I have taken a piece of whole cannon, whereof the end was burst, and filled it three-quarters full of water, stopping and screwing up the broken end, as also the touch-hole; and making a constant fire under it, within twenty-four hours it burst and made a great crack; so that having a way to make my vessels so that they are strengthened by the force within them, and the one to fill after the other, I have seen the water run like a constant stream, forty feet high: one vessel of water, rarefied by fire, driveth up forty of cold water; and the man that tends the work is but to turn two cocks, that one vessel of water being consumed, another begins to force and refill with cold water, and so successively; the fire being tended and kept constant, which the self-same person may likewise abundantly perform in the interim, between the necessity of turning the said cocks."

It is unfortunate that the Marquis did not give a more elaborate description of this remarkable contrivance. The fact that he treats it so casually is sufficient evidence that he had no conception of the possibilities of the mechanism; but, on the other hand, his description suffices to prove that he had gained a clear notion of, and had experimentally demonstrated, the tremendous power of expansion that resides in steam. No example of his steam pump has been preserved, and historians of the subject have been left in doubt as to some details of its construction, and in particular as to whether it utilized the principle of a vacuum created through condensation of the steam.

THOMAS SAVERY'S STEAM PUMP

This principle was clearly grasped, however, by another Englishman, Thomas Savery, a Cornish mine captain, who in 1698 secured a patent for a steam engine to be applied to the raising of water, etc. A working model of this machine was produced before the Royal Society in 1699. The transactions of the Society contain the following: "June 14th, 1699, Mr. Savery entertained the Royal Society with showing a small model of his engine for raising water by help of fire, which he set to work before them: the experiment succeeded according to expectation, and to their satisfaction."

The following very clear description of Savery's engine is given in the introduction to Beckmann's History of Inventions:

"This engine, which was used for some time to a considerable extent for raising water from mines, consisted of a strong iron vessel shaped like an egg, with a tube or pipe at the bottom, which descended to the place from which the water was to be drawn, and another at the top, which ascended to the place to which it was to be elevated. This oval vessel was filled with steam supplied from a boiler, by which the atmospheric air was first blown out of it. When the air was thus expelled and nothing but pure steam left in the vessel, the communication with the boiler was cut off, and cold water poured on the external surface. The steam within was thus condensed and a vacuum produced, and the water drawn up from below in the usual way by suction. The oval vessel was thus filled with water; a cock placed at the bottom of the lower pipe was then closed, and steam was introduced from the boiler into the oval vessel above the surface of the water. This steam being of high pressure, forced the water up the ascending tube, from the top of which it was discharged, and the oval vessel being thus refilled with steam, the vacuum was again produced by condensation, and the same process was repeated. By using two oval steam vessels, which would act alternately—one drawing water from below, while the other was forcing it upwards, an uninterrupted discharge of water was produced. Owing to the danger of explosion, from the high pressure of the steam which was used, and from the enormous waste of heat by unnecessary condensation, these engines soon fell into disuse."

THOMAS SAVERY'S STEAM ENGINE.

The principle involved is that of the expansion of steam exerting a propulsive force and its subsequent condensation to produce a vacuum. These are the principles employed in the modern steam engine, but the only use to which they were put in Savery's engine was the elevation of water by suction.