Nature's Teachings: Human Invention Anticipated by Nature

by J. G. Wood

We all know the enormous force exerted by screws when working in wood, and how, when the screw-driver is turned in the reverse direction, the instrument is forced backwards, though the operator is leaning against it with all his weight. In fact, a comparatively small screw, if working in hard wood or metal, so that the threads could not break, could lift a heavy man.

Substitute water for wood or metal, and the result would be the same in principle, though the resistance would be less. As the loss of power by friction would prevent a large vessel from being propelled by a stern oar moved like a scull, the idea was invented of applying the same kind of power by a large screw, which should project into the water from the stern of the vessel. This modification, moreover, would have the advantage of forcing the vessel forward when the screw was turned from left to right, and drawing it back when turned in the opposite direction, whereas the sculling oar would only drive it forward.

The principle was right enough, but there was at first a great difficulty in carrying it out. Firstly, several turns of a large screw were used, and were found to need power inadequate to the effect. Then the screw was reduced to four separate blades, and now only two are used, as shown in the illustration, these saving friction, being equally powerful for propulsion, and running less risk of fouling by rigging blown overboard or other floating substances.

So much for Art. Now for the same principle as shown in Nature, of which I can take but a very few instances.

The first and most obvious example is that of the Fish-tail, which any one may observe by watching ordinary gold fish in a bowl. Their progression is entirely accomplished by the movement of the tail from side to side, exactly like that of the sculling oar, and moreover, like the oar, the tail acts as rudder as well as propeller.

The force with which this instrument can be used may be estimated by any one who is an angler, and knows the lightning-like rush of a hooked trout, or who has seen the wonderful spring with which a salmon shoots clear out of the water, and leaps up a fall several feet in height. This is not done, as many writers state, by bending the body into a bow-like form, and then suddenly straightening it, but by the projectile force which is gained by moving the tail backwards and forwards as a sculler moves his oar.

Perhaps some of my readers have seen the wonderful speed, ease, and grace with which an Otter propels itself through the water. As the otter feeds on fish, and can capture even the salmon itself, its powers of locomotion must be very great indeed. And these are obtained entirely by means of the tail, which is long, thick, and muscular, and can be swept from side to side with enormous force, considering the size of the animal. The legs have little or nothing to do with the act of swimming. The fore-legs are pressed closely against the body, and the hind-legs against each other. The latter act occasionally as assistants in steering, but that is all.

Then there are the various Seals, whose hind-legs, flattened and pressed together, act exactly like the tail of the fish, that of the otter, the oar of the sculler, or the screw of the steamer. Also, the eel, when swimming, uses exactly the same means, its lithe body forming a succession of inclined planes; so does the snake, and so does the pretty little lampern, which is so common in several of our rivers, and so totally absent from others.

I can only now give a short description of the woodcut which illustrates these points.

On the right hand Art is shown by the screw-blades of the modern steamer. In the middle is the ordinary mode of sculling a boat by an oar in the stern, and below it is the rudder, which, like the sculling oar, may be used either for propulsion or direction.