GINNING COTTON. THE OLD WAY, PRIOR TO 1800.
GINNING COTTON. THE NEW WAY.
The acme of development in this small but most important part of the ring frame was now reached; and in its approved form it embodies the sleeve whirl extending into the bobbin, the loose, yet adjustable bolster, tapering spindle, removable step, and lubricating reservoir. Such spindles are capable of unlimited speeds,—twenty thousand revolutions per minute have been given,—and under absurdly unbalanced loads they run steadily and with less expenditure of power than the older forms at their slower speeds.
Increased speed in the spindles, however, brought increased breakage in the yarn, and although stop motion devices had been employed for several years, yet economy demanded ready means of piecing broken ends. This has been provided recently by mounting the stop clamp upon the roving rod well up near the first pair of drawing rolls, so that on pulling the stop wire into place the roving is at once fed between the drawing rolls and issues in front, over the spindle, to be easily pieced by one hand. Prior to this, the operative was required to reach over the machine, feed the roving to the rolls with one hand, hold the stop wire down with the other, and the broken end of yarn in his teeth.
THE MODERN MULE.
Excessive ballooning was also incidental to the use of high speed spindles, and, while inventive skill has never mastered it, yet the injurious effects have been obviated by an ingenious mounting of separators, one between each two spindles.