Stamping-mills are chiefly used for reducing brittle materials. A number of stamps arranged in a row are alternately lifted, by means of cams mounted on a common shaft, and then let fall on to the material lying on a solid plate, or else on a grating through which the crushings fall. [Fig. 3] is a stamping-mill constructed by H. F. Stollberg, Offenbach.
Fig. 3.
These mills are very strongly built, as independent units, the frame being of cast-iron and the rams of best wrought-iron with interchangeable chill-cast heads. In some mills the stamps are rotated during the up-stroke, in order to equalise the wear on the heads, and also to economise power.
The grating or trough holding the material is perforated with holes, the diameter of which varies with the material under treatment and the desired degree of fineness in the product. To increase the efficiency of the mill, the grating or trough is adapted to move while the mill is running, in order to clean itself automatically. These mills are made in different sizes, with 2, 4, 6, or 8 heads.
Fig. 4.
Edge-runners.—This type of crusher is highly suitable for reducing earth colours in large works. The special feature of the type is that both stones are mounted vertically and turn on a common shaft in the same way that a cart wheel does on its axle. These runners are particularly useful for reducing clay, chalk and other earth colours, which have to be dealt with in large quantities. They will also crush fairly large lumps, and they can therefore be used for the further reduction of materials roughly crushed in a breaker, etc. The material may be treated in either the wet or dry state, only slight alteration being needed to change from one method to the other.
There are numerous different patterns of edge-runner, but all of them can be divided into two groups, viz.: mills with stationary troughs, whilst the shaft carrying the runners rotates; and those in which the trough revolves, and the stones merely turn on the stationary horizontal shaft.
