Bicycling for Ladies / The Common Sense of Bicycling; with Hints as to the Art of Wheeling—Advice to Beginners—Dress—Care of the Bicycle—Mechanics—Training—Exercise, etc., etc.

by Maria E. Ward

If the saddle is not right, dismount the wheeler in this way: Have the wheeler’s feet firmly placed on both pedals, and see that the down pedal is on the side on which you are standing. Pull the machine a little to that side, and see that the foot is on the down pedal. Then direct the wheeler to step on this down pedal, throwing all the weight on it, and to pass the raised foot over in front of the down foot to the ground. The foot on the down pedal should not be removed until the other foot, placed on the ground, has taken the rider’s weight.

PREPARING TO DISMOUNT.

Say that you are now going to move, and let the wheeler mount as before. Show that a wiggling movement must be kept up with the front wheel, and say that you will help to do it. See that the wheeler has both handles held firmly, and then grasp the bars just in front of the handle. Keep firm hold of the saddle, and control the balance and push by that, letting the bars do their own work.

A learner always pushes too hard on the pedals.

Take the machine about, and trot it up and down, holding it firmly and keeping it balanced. Should it pull you over, the wheeler can step off without difficulty.

It is much easier for two than for one to help a beginner. A trio of novices can form a very fair school. A bicycle is inclined either to pull or to push, and if supported on both sides, the pulling tendency is avoided and the pushing tendency readily corrected. If ladies are helping one another, the best way is for two to hold the bicycle, standing one on each side of the machine. Both should hold the saddle and both should hold the handle-bars just beyond the handles and above the hands of the wheeler. One should instruct, and the other help to hold the machine.

Let a beginner first learn to mount, then to dismount, practising these movements several times before starting; then, having made sure that the pedal on that side is two-thirds up, come to the left hand side of the wheel, step on the pedal, and be seated in the saddle; then put the weight on the pedal that is down, and step off with the other foot. Repeat several times, mounting from each side, dismounting on the same side and on the opposite side, at command, and repeating. Tilt the wheel as the weight goes on the pedal. Dismount the pupil, and walk the wheel about between you, wiggling the front wheel. Then mount your pupil, and proceed as already explained. After the pupil begins to propel the wheel, very little assistance from the instructor is necessary, and care should be taken not to confuse the pupil as to the amount of work they are doing. Call attention to the ease with which the wheel is brought up when inclined to fall, and explain about turning and steering and wiggling, and what these motions are for. You cannot propel a bicycle unless you know what you are doing; there cannot be guess-work about it. The perfect confidence that comes with familiarity and practice must precede success.

Given three people with one bicycle, all can learn to ride, helping each other in turn. Having learned to mount and dismount, the next thing is to learn to start the bicycle. The weight should be allowed to start the bicycle as soon as the foot, pressing on the pedal as it descends, brings the wheeler to the saddle.

The stop should be learned next. The wheeler should be reminded to notice which is the down pedal, and to step on it with all the weight just as it begins to rise. This will stop the machine, and the dismount is made in the usual way by throwing the other foot over, and stepping with that on the ground. The foot that has stopped the machine should not leave the pedal too soon, but remain on it long enough to control the bicycle.