Hunting with the Bow & Arrow

by Saxton T. Pope

One or two coats are applied according to the fancy of the archer. The line between the various pigments should be striped with a thin black ring.

Unless you use a lathe to hold your arrows in the painting process, you can employ two wooden blocks or rests, one having a shallow countersunk hole on its lateral face to hold the nock while rotating, the other having a groove on its upper surface. Clamp these on a bench, or on the opposite arms of your easy chair before the fire, and you can turn your shafts slowly by hand while you steady your brush and apply the paint in even rings.

At this stage I have added a device which seems to be helpful in nocking arrows in the dark, or while keeping one's eye on the game. Having put a drop of glue on the ribbon immediately above the nock and behind the cock feather, I affix a little white glass bead. One can feel this with his thumb as he nocks his arrow, when in conjunction with knots on his string, he can perform this maneuver entirely by touch.

The paint having dried, varnish or shellac your arrow its entire length, avoiding, of course, any contact with the feathers. In due time sandpaper the shaft and repeat the varnishing. Rub this down with steelwool and give it a finishing touch with floor wax.

Here we are ready for the arrow-heads.

We use three types of points. The first is a blunt head made by binding the end of the shaft with thin tinned iron wire for half an inch and running on solder, then drilling a hole in the end of the shaft and inserting an inch round-headed screw. In place of soldered wire, one can use an empty 38-caliber cartridge, either cutting off the base or drilling out the priming aperture to admit the screw. This type of arrow we use for rough practice, shooting tin cans, trees, boxes, and other impedimenta. It makes a good shaft for birds, rabbits, and small game.

A second type of head we use is made of soft steel about a sixteenth of an inch thick. We cut it with a hack saw into a blunt, barbed, lanceolate shape having a blade about an inch long and half an inch wide, also a tang about the same length and three-eighths of an inch wide.

This we set into a slot sawed in the arrow in the same plane as the nock, and bind the shaft with tinned wire, number 30, soldered together. The end of the shaft has a gradual bevel where it meets the lateral face of the head.

This is a sturdy little point and will stand much abuse. We use it for shooting birds, squirrels, and small vermin.

But the point that we prefer to shoot is the old English broad-head. Starting from small dimensions, we have gradually increased its size, weight and strength and cutting qualities till now we shoot a head whose blade is three inches long, an inch and a quarter wide, a trifle less than a thirty-second thick. It has a haft or tubular shank an inch long. Its weight is half an ounce. The blades are made of spring steel. After annealing the steel we score it diagonally with a hack saw, when it may be broken in triangular pieces in a vise. With a cold chisel, an angular cut is made in the base to form the barbs. With a file and carborundum stone, they are edged and shaped into blades as sharp as knives. Soft, cold drawn steel will serve quite as well as spring steel for these blades, but it does not hold its edge. It may be purchased at hardware supply depots in the form of strips an inch and a half wide, by one-thirty-second thick, and is much easier to work than the tempered variety.