Страница - 246Страница - 248
Napier, 60 H.P. Napier Motor Co. of America, Jamaica Plain, Mass.

- PRICE: $8,000 (complete)
- BODY: Side entrance tonneau, with cape cart top
- SEATS: 7 persons
- WEIGHT: 2,300 pounds (chassis)
- WHEEL-BASE: 126 inches
- TREAD: 56 inches
- TIRES, FRONT: 36 × 4½ inches
- TIRES, REAR: 36 × 5½ inches
- STEERING: Worm and sector
- BRAKES: On transmission and rear hubs
- SPRINGS: Semi-elliptical front and platform rear
- FRAME: Pressed nickel steel
- BORE: 5 in.; STROKE: 4 in.
- CYLINDERS: 6, vertical (cast in pairs)
- VALVE ARRANGEMENT: Inlets and exhaust on one side
- MOTOR SUSPENSION: From sides to frame members
- COOLING: Water; cellular radiator
- IGNITION: Jump spark; Napier single coil synchronized ignition
- CURRENT SUPPLY: Storage battery or magneto
- CARBURETER: Float-feed with automatic regulator
- LUBRICATION: Mechanical fore feed; gear pump
- MOTOR-CONTROL: Spark and throttle
- CLUTCH: Cone: metal-to-metal
- CHANGE GEAR: Sliding type; annular ball bearing
- SPEEDS: 3 forward and 1 reverse
- CHANGE-GEAR CONTROL: Side lever; selective type
- DRIVE: Shaft
Brasier, 25–36–42 H.P. E. B. Gallaher, New York

- PRICE: $5,875 (chassis)
- BODY: Side entrance double phæton
- SEATS: 7 persons
- WEIGHT: 2,300 pounds
- WHEEL-BASE: 120 inches
- TREAD: 56 inches
- TIRES, FRONT: 880 × 120 mm.
- TIRES, REAR: 880 × 120 mm.
- STEERING: Worm and sector
- BRAKES: On hubs and transmission
- SPRINGS: Semi-elliptic front; ¾ elliptic rear
- FRAME: Pressed steel
- BORE: 112 mm.; STROKE: 130 mm.
- CYLINDERS: 4, in pairs
- VALVE ARRANGEMENT: Same side
- MOTOR SUSPENSION: Sub-frame
- COOLING: Water; tubular fin radiator
- IGNITION: Make-and-break
- CURRENT SUPPLY: Simms-Bosch magneto
- CARBURETER: Automatic
- LUBRICATION: Mechanical
- MOTOR-CONTROL: Throttle only; automatic spark advance
- CLUTCH: Cone
- CHANGE GEAR: Sliding type
- SPEEDS: 4 forward and reverse
- CHANGE-GEAR CONTROL: Progressive system
- DRIVE: Chain