RA PD 318204
Figure 54—Coil Front Connections Showing Radio Bonding and Noise Suppression Condenser
(5) Swing air cleaner and bracket assembly outward to gain access to coil rear terminals.
(6) Disconnect coil to timer wire from coil rear terminal screw. Disconnect wire shielding from coil rear ground terminal ([fig. 53]).
(7) Swing cleaner back and remove wire connections from coil front terminal screw ([fig. 54]).
(8) Disconnect radio bonding at coil front ground terminal ([fig. 54]).
(9) Remove nuts and bolts which mount coil to bracket. Coil is now free for removal.
c. Install.
(1) Mount coil on frame bracket with high‐tension cables upward, and reinstall mounting bolts, lock washers, and nuts. Tighten nuts.
(2) Connect terminals of the two green wires to coil front terminal screw. Refer to wiring diagram, figure [48].