(2) Insert lower end of control wire through clamp nut, then through clevis and back through clamp nut again. Grasp end of wire with pliers and pull until all slack is taken up. Then, while pulling wire snug, tighten clamp nut securely. Cut off excess wire.
(3) Adjust brake control (refer to step d below).
RA PD 310274
Figure 62—Front Brake Control and Adjusting Members
d. Adjusting Front Wheel Brake. End of brake hand lever must move freely about ¼ of its travel before meeting resistance of brake operation.
(1) Loosen adjusting sleeve lock nut and turn adjusting sleeve as necessary to attain correct free movement of hand lever.
(2) After correct hand lever adjustment is made, tighten adjusting sleeve lock nut.
e. Remove Brake Shoes.