Capacity. It will take our 16 × 9-inch or 18 × 12-inch pans of pop-corn and press the corn without hesitating.
- Stock No. 110 Power Press with foot trip, one plate 16 × 9 inches, and adjustable guides
- Stock No. 2002-1 Plate for “Two-fers,” 12 × 18 inches, with fins to cut pan of corn into 56 pieces. Made of special non-sticking metal
- Stock No. 2002-2 Press casting for holding “Two-fers” plate or Pressing Pans 12 × 18
Stock No. 2008-1
KNOTT’S POP-CORN CUTTING RACK
These are the very best style of hand cutting rack you can use, made of maple. Nickel-plated handle on straight edge. This rack is made to stay in shape and give long service.
- Stock No. 2008-1 Rack, to match pan 16 inches by 9 inches for cutting package corn
- Special racks for bars, squares, etc.
- Prices at your request.
On the bench, about two feet to the right of the press, fasten a board two feet long to the edge, letting it project an inch above the bench.
Place your cutting rack frame against this board on the bench with the bottom board in it and the end toward you.
Take the pan of pressed corn, and turn it upside down on the bench between the press and this cutting rack. A sharp rap will drop the corn out of the pan.