Lift this sheet of corn, put the back end into the cutting rack, bend the sheet into a bow shape so that the front end will go into the rack. Then press down the center.

Hold the straight edge by the handle in the left hand and draw quickly a well sharpened knife (Stock No. [2009-1]) toward you along the straight edge to make the cut, passing it through the slots in the sides of the rack. To cut the other way, turn the rack around.

To remove the pop-corn from the rack, lift up the rack frame, leaving the bottom board. The corn will fit tight enough to be lifted with the frame. Set the frame down on the bench to the right. Place your right hand on the pop-corn and lift off the rack with your left hand.

KNOTT’S POP-CORN BRICK AND BAR CUTTING MACHINE

Stock No. 111

TRANSFER RACK STOCK No. 2022-1

Showing cutting rack with transfer rack on it and showing transfer rack separate