The first shipment,[3] consisting of five hundred and fifty bars eighteen feet long, thirty-six pounds to the yard, arrived in Philadelphia on the ship Charlemagne, May 16, 1831.
Over thirty miles of this rail was laid before the summer of 1832.
A few years after, on much of the Stevens rail laid on the Camden and Amboy Railroad, the rivets at the joints were discarded, and the bolt with the screw thread and nut, similar to that now used, was adopted as the standard.
The rail was first designed to weigh thirty-six pounds per yard, but it was almost immediately increased in weight to between forty and forty-two pounds, and rolled in lengths of sixteen feet. It was then three and a half inches high, two and one-eighth inches wide on the head and three and a half inches wide at the base, the price paid in England being £8 per ton. The import duty was $1.85.
The first shipment of rail, having arrived in America, was transported to Bordentown, and here, upon the ground on which we stand, and which this monument is erected to mark forever, was laid the first piece of track (about five-sixths of a mile long) in August, 1831. The Camden and Amboy Company, following the example of the Manchester and Liverpool Railroad, laid their first track upon stone blocks two feet square and ten to thirteen inches deep. These blocks were purchased from the prison authorities at Sing Sing, N.Y. Some of these stone blocks have been used in constructing the foundation for this monument.
FIRST JOINT FIXTURES.
Mr. Stevens ordered the first joint fixtures also from an English mill, at the same time. The ends of the rails were designed to rest upon wrought iron plates or flat cast plates. The rails were connected at the stems by an iron "tongue" five inches long, two inches wide, and five-eighths of an inch thick. A rivet, put on hot, passing through the stem of each rail near the ends of the bar, fastened it to the tongue and completed the joint. A hole oblong in shape, to allow for expunctral contraction, was punched in the stem at each end of the rail.
THE FIRST RAILROAD SPIKES.
The first "spikes six inches long, with hooked heads," were also ordered at the same time. These were undoubtedly the "first railroad spikes" (as they are known to the trade) ever manufactured.
Mr. Stevens neglected to obtain a patent for these inventions, although urged to do so by Mr. Ogden, American Consul at Liverpool, and the credit of being the inventor of the American rail was for a time claimed for others, but the evidence brought forward in late years fully established the fact that he was the originator of the American system of railway construction.