For this purpose, different workers favour different classes of light: one prefers gaslight, another swears by magnesium ribbon, and some even prefer the light of day.
Personally, I favour ordinary gaslight passed through a No. 5 Bray's burner, because it is quite rapid enough for all practical purposes and is perfectly under control and free from serious variation.
The burner should be within easy reach of the worktable and should be fitted with a byepass to obviate the necessity of continually striking matches. Several years ago I had my bromide printing rooms fitted with an excellent lantern of this class in which the byepass was connected to two jets (one inside and the other outside the lantern) in such a way as to turn down the white light with the same movement that raised the coloured light, and vice versa. By this means no gas was wasted and the simple action of pulling or pushing a lever operated either light at will. By placing the same lever "amidships," both jets were lowered to the point of invisibility and could so remain for days at a time, yet always ready at a moment's notice. The accompanying sketch (fig. 1) will give some idea of its construction.
Fig. 1.
If the dark-room is small, and space is an object, the sink may be fitted with a wooden cover and this may be used as a table for printing the paper, but care must be observed to avoid the slightest moisture upon it or satisfactory work is impossible and the negatives may be ruined. In a large room, it is much better to have an ordinary kitchen table removed some distance from the sink; with this and a comfortable chair bromide printing is a very pleasant occupation. The following sketch (fig. 2) will explain the arrangement of the table, and it applies equally well to the movable top of the sink.
Fig. 2.