Fig. 11—Landscape gardening. An airplane view of a part of Long Branch, N.J., taken from a height of 10,000 feet, showing the beach and surf at the right, and the streets, mansions, driveways, and lawns in the body of the picture—an example of the development of a barrier beach of little value before the exploitation for summer homes. Scale, about 1: 15,000.
this road the surface appears in its natural state. In the mosaic are shown at the left the highlands west of the marshes, wooded in some places but cleared and improved in others. In the northern part can be seen land wooded north of the District line but cleared south of it. So comprehensive a view of the field of the project and of the progress to date should be of great service to the engineers and promoters.
CHAPTER IV
THE MOSAIC
(Figs. 13 and 22)
In its simplest form, the mosaic is made by mounting overlapping prints so that the corresponding details coincide. This type of mosaic is quite adequate for relatively small areas or where a high degree of accuracy is not required. For larger areas and greater accuracy, an accurate outline map is used as a base upon which the prints are mounted so that recognizable features coincide with their location on the map. When the prints are properly arranged, the better print of each overlapping pair is selected, the excess paper removed, and the whole mounted and photographed. Figure 13 is left untrimmed to illustrate the method of matching the overlapping prints. The differences in shade are due to difference in printing and developing the pictures which make up the mosaic. The slight offsetting of line at the junction of the prints may be due to errors in mounting, shrinking, or stretching of the photographic paper, tilting of the camera at the time of exposure, or other cause. Such errors and imperfections illustrate the difficulty of using these photographs in the making of maps.
A skillful manipulation of both airplane and camera is necessary to the success of the mosaic. To prevent distortion and variation of scale, the camera must be maintained at the same altitude at all times and pointed directly downward. This can be accomplished by flying with an even keel at a uniform altitude. Mechanical devices are also being perfected to accomplish the same result. Still greater skill is necessary when consecutive rows of exposures are made for the purpose of placing strips of photographs side by side to cover a large area. It is difficult under the varying conditions of wind and weather to fly so evenly and so nearly at the same level that distortions and differences in scale are not noticeable. Strong objection to the mosaic is frequently raised because of inaccuracies due to difference in scale in neighboring prints. Until these defects are overcome, such a group of matched photographs cannot take the place of an accurate map. Much, however, is being done to correct these defects, and, even in photographs where inaccuracies in scale are many, the value of the photograph for the portrayal of detail cannot be denied.
CHAPTER V
GENERAL ASPECTS OF THE SURFACE AS SEEN FROM THE AIR
(Figs. 12 to 18)
