Woman's Institute Library of Cookery. Volume 3: Soup; Meat; Poultry and Game; Fish and Shell Fish

by Woman's Institute of Domestic Arts and Sciences

The methods of cookery that may be applied to meat include broiling, pan broiling, roasting, stewing or simmering, braizing, frying, sautéing, and fricasseeing. All of these methods are explained in a general way in Essentials of Cookery, Part 1, but explanations of them as they apply to meat are here given in order to acquaint the housewife with the advantages and disadvantages of the various ways by which this food can be prepared.

22. BROILING AND PAN BROILING.--Only such cuts of meats as require short cooking can be prepared by the methods of broiling and pan broiling. To carry out these methods successfully, severe heat must be applied to the surface of the meat so that the albumin in the ends of the muscle fibers may be coagulated at once. This presents, during the remainder of the preparation, a loss of the meat juices.

Meat to which either of these methods is applied will be indigestible on the surface and many times almost uncooked in the center, as in the case of rare steak. Such meat, however, is more digestible than thin pieces that are thoroughly cooked at the very high temperature required for broiling.

23. ROASTING.--The process of roasting, either in the oven or in a pot on top of the stove, to be properly done, requires that the piece of meat to be roasted must first be seared over the entire surface by the application of severe heat. In the case of a pot roast, the searing can be done conveniently in the pot before the pot-roasting process begins. If the meat is to be roasted in the oven, it may be seared first in a pan on top of the stove. However, it may be seared to some extent by placing it in a very hot oven and turning it over so that all the surface is exposed. Then, to continue the roasting process, the temperature must be lowered just a little.

The roasting pan may be of any desirable size and shape that is convenient and sufficiently large to accommodate the meat to be prepared. A pan like that shown in Fig. 2 is both convenient and satisfactory. It is provided with a cover that fits tight. In this cover, as shown, is an opening that may be closed or opened so as to regulate the amount of moisture inside the pan. In the bottom of the pan is a rack upon which the meat may rest.

24. To prepare meat for roasting, flour should be sprinkled or rubbed over its lean surface before it is put in the pan. This forms a paste that cooks into a crust and prevents the loss of juices from the meat. In roasting, the heat is applied longer and more slowly than in broiling or frying, so that there is more possibility for the connective tissue beneath the surface to soften. The surface is, however, as indigestible as that of broiled meat.

An important point for every housewife to remember in this connection is that the larger the roast the slower should be the fire. This is due to the fact that long before the heat could penetrate to the center, the outside would be burned. A small roast, however, will be more delicious if it is prepared with a very hot fire, for then the juices will not have a chance to evaporate and the tissues will be more moist and tasty.

25. FRYING AND SAUTÉING.--When meat is fried or sautéd, that is, brought directly in contact with hot fat, it is made doubly indigestible, because of the hardening of the surface tissues and the indigestibility of the fat that penetrates these tissues. This is especially true of meat that is sautéd slowly in a small quantity of hot fat. Much of this difficulty can be overcome, however, if meat prepared by these methods, like that which is broiled or roasted, is subjected quickly to intense heat. In addition, the fat used for cooking should be made hot before the meat is put into it.

26. BOILING.--To boil meat means to cook it a long time in water at a temperature of 212 degrees Fahrenheit. This method of preparing meat is not strongly advocated, for there is seldom a time when better results cannot be obtained by cooking meat at a lower temperature than boiling point. The best plan is to bring the meat to the boiling point, allow it to boil for a short time, and then reduce the temperature so that the meat will simmer for the remainder of the cooking.