Every-day Science: Volume 6. The Conquest of Nature

by Henry Smith Williams; Edward Huntington Williams

RUNNING WATER

The aggregate amount of work accomplished with the aid of the wind is but trifling, compared with that which is accomplished with the aid of water. The supply of water is practically inexhaustible, and this fluid being much more manageable than air, can be made a far more dependable aid to the worker. Every stream, whatever its rate of flow, represents an enormous store of potential energy. A cubic foot of water weighs about sixty-two and a half pounds. The working capacity of any mass of water is represented by one-half its weight into the square of its velocity; or, stated otherwise, by its weight into the distance of its fall. Now, since the interiors of the continents, where rivers find their sources, are often elevated by some hundreds or even thousands of feet, it follows that the working energy expended—and for the most part wasted—by the aggregate water current of the world is beyond all calculation. Meantime, however, a portion of the energy which in the aggregate represents an enormous working power is utilized with the aid of various types of water wheels.

Watermills appear to have been introduced in the time of Mithridates, Julius Cæsar, and Cicero. Strabo informs us that there was a watermill near the residence of Mithridates; and we learn from Pomponius Sabinus, that the first mill seen at Rome was erected on the Tiber, a little before the time of Augustus. That they existed in the time of Augustus is obvious from the description given of them by Vitruvius, and the epigram of Antipater, who is supposed to have lived in the time of Cicero. But though mills driven by water were introduced at this early period, yet public mills did not appear till the time of Honorius and Arcadius. They were erected on three canals, which conveyed water to the city, and the greater number of them lay under Mount Janiculum. When the Goths besieged Rome in 536, and stopped the large aqueduct and consequently the mills, Belisarius appears to have constructed, for the first time, floating mills upon the Tiber. Mills driven by the tide existed at Venice in the year 1046, or at least in 1078.

The older types of water wheel are exceedingly simple in construction, consisting merely of vertical wheels revolving on horizontal axes, and so placed as to receive the weight or pressure of the water on paddles or buckets at their circumference. The water might be allowed to rush under the wheel, thus constituting an under-shot wheel; or more commonly it flows from above, constituting an over-shot wheel. Where the natural fall is not available, dams are employed to supply an artificial fall.

This primitive type of water wheel has been practically abandoned within the last generation, its place having been taken by the much more efficient type of wheel known as the turbine. This consists of a wheel, usually adjusted on a vertical axis, and acting on what is virtually the principle of a windmill. To gain a mental picture of the turbine in its simplest form, one might imagine the propelling screw of a steamship, placed horizontally in a tube, so that the water could rush against its blades. The tiny windmills which children often make by twisting pieces of paper illustrate the same principle. Of course, in its developed form the turbine is somewhat elaborated, in the aim to utilize as large a proportion of the energy of the falling water as is possible; but the principle remains the same.

The turbine wheel was invented by a Frenchman named Fourneyron, about three-quarters of a century ago (1827), but its great popularity, in America in particular, is a matter of the last twenty or thirty years. To-day it has virtually supplanted every other type of water wheel. To use any other is indeed a wasteful extravagance, as the perfected turbine makes available more than eighty per cent. of the kinetic energy of any mass of falling water. A turbine wheel two feet in diameter is able to do the work of an enormous wheel of the old type.

Turbine wheels are of several types, one operating in a closed tube to which air has no access, and another in an open space in the presence of air. The water may also be made to enter the turbine at the side or from below, thus serving to support the weight of the mechanism—a consideration of great importance in the case of such gigantic turbines as those that are employed at Niagara Falls, which we shall have occasion to examine in detail in a later chapter.

WATER WHEELS.

Fig. 1 shows a model of the so-called breast wheel, a familiar type of water wheel that has been in use since the time of the Romans. Figs. 2 and 3 show similar wheels as used to-day in Belgium. Fig. 4 shows a model of Fourneyron's turbine. This wheel was made in 1837, but the original turbine was introduced by Fourneyron in 1827. The turbine wheel has now almost supplanted the other forms of water wheel except in rural districts.

The power generated by a revolution of the turbine wheel may, of course, be utilized directly by belts or gearings attached to its axle, or it may be transferred to a distance, with the aid of a dynamo generating electricity. The latter possibility, which has only recently been developed, and which we shall have occasion to examine in detail in connection with our studies of the power at Niagara, gives a new field of usefulness to the turbine wheel, and makes it probable that this form of power will be vastly more used in the future than it has been in the past. Indeed, it would not be surprising were it ultimately to become the prime source of working energy as utilized in every department of the world's work.

Mr. Edward H. Sanborn, in an article on Motive Power Appliances in the Twelfth Census Report of the United States, comments upon the recent advances in the use of water wheels as follows:

"One notable advance in turbine construction has been the production of a type of wheel especially designed for operating under much higher heads of water than were formerly considered feasible for wheels of this type. Turbines are now built for heads ranging from 100 to 1,200 feet, and quite a number of wheels are in operation under heads of from 100 to 200 feet. This is an encroachment upon the field occupied almost exclusively by wheels variously known as the 'impulse,' 'impact,' 'tangential,' or 'jet' type, the principle of which is the impact of a powerful jet of water from a small nozzle upon a series of buckets mounted upon the periphery of a small wheel."

"The impact water wheel," Mr. Sanborn continues, "has come largely into use during the last ten years, principally in the far West, where higher heads of water are available than can be found in other parts of the country. With wheels of this type, exceedingly simple in construction and of comparatively small cost, a large amount of power is developed with great economy under the great heads that are available. With the tremendous water pressure developed by heads of 1,000 feet and upward, which in many cases are used for this purpose, wheels of small diameter develop an extraordinary amount of power. To the original type of impact wheel which first led the field have been added several styles embodying practically the same principle. Considerable study has been given to the designing of buckets with a view to securing free discharge and the avoidance of any disturbing eddies, and important improvements have resulted from the thorough investigation of the action of the water during, and subsequent to, its impact on the buckets. The impact wheel has been adapted to a wide range of service with great variation as to the conditions under which it operates, wheels having been made in California from 30 inches to 30 feet in diameter, and to work under heads ranging from 35 to 2,100 feet, and at speeds ranging from 65 to 1,100 revolutions per minute. A number of wheels of this type have been built with capacities of not less than 1,000 horse-power each."