To understand this it must be recalled that when using the expansive property of steam, the piston thrust could not possibly be uniform, since the greatest pressure exerted by the steam would be exerted at the moment before it was shut off from the boiler, and its pressure must then decrease progressively, as it exerts more and more work upon the piston and becomes more expanded, thus obviously retaining less elastic energy. The operation of the fly-wheel largely compensates this difference of pressure in practise, but it would be obviously advantageous could the pressure be equalized; and, as just stated, the compound engine tends to produce this result.
The second, and perhaps the more important merit of the compound engine is, that it is found in practise to keep the cylinders at a more uniform temperature. A moment's reflection makes it clear why this should be the case, since in a single-cylinder engine the exhaust connects with the cool condenser, whereas in the compound engine the exhaust from the first cylinder connects with the second cylinder at only slightly lower temperature.
In many modern engines a third cylinder and sometimes even a fourth is added, constituting what are called respectively triple-expansion and quadruple-expansion engines. The triple-expansion system is very generally employed, especially where it is peculiarly desirable to economize fuel, as, for example, in the case of ships.
COMPOUND ENGINES.
The lower figure illustrates the use of a modern compound engine, directly operating the propeller shaft of a steamship. The middle figure shows a similarly direct application of power to the axes of paddle wheels. The upper figure shows the application of power through a walking beam similar in principle to that of the original Newcomen and Watt engines.