Every-day Science: Volume 6. The Conquest of Nature

by Henry Smith Williams; Edward Huntington Williams

ROTARY ENGINES

All these improvements, it will be observed, have to do with details that do not greatly modify the steam engine from the original type. The cylinder with its closely fitting piston, as introduced in the Newcomen engine, is retained and constitutes the essential mechanism through which the energy of steam is transferred into mechanical energy. But from a comparatively remote period the idea has prevailed that it might be possible to utilize a different principle; that, in short, if the steam instead of being made to press against a piston were allowed to rush against fan-like blades, adjusted to an axle, it might cause blades and axle to revolve, precisely as a windmill is made to revolve by the pressure of the wind, or the turbine wheel by the pressure of water.

In a word, it has been believed that a turbine engine might be constructed, which would utilize the energy of the steam as advantageously as it is utilized in the piston engine, and at the same time would communicate its power as a direct rotation, instead of as a straight thrust that must be translated into a rotary motion by means of a crank or other mechanism.

In point of fact, James Watt himself invented such an engine, and patented it in 1782, though there is no evidence that he ever constructed even a working model. His patent specifications show "a piston in the form of a closely-fitting radial arm, projecting from an axial shaft in a cylinder. An abutment, arranged as a flap is hinged near a recess in the side of the cylinder, and swings while remaining in contact with the piston. Steam is admitted to the chamber on one side of the flap, and so causes an unbalanced pressure upon the radial arm."

This arrangement has been re-invented several times. Essentially the same principle is utilized by Joshua Routledge, whose name is well known in connection with the engineer's slide-rule. A model of this engine is preserved in the South Kensington Museum, and the apparatus is described in the catalogue of the Museum as follows:

"The piston revolves on a shaft passing through the centre of the cylinder casing. The flap or valve hinged to the casing, with its free end resting upon the piston, acts like the bottom of an ordinary engine cylinder. The steam inlet port is on one side of the hinge, and the exhaust port on the other. The admission of steam is controlled by a side valve, actuated by an eccentric on the fly-wheel shaft, so that the engine could work expansively, and the steam pressure resisting the lifting of the flap would also be greatly reduced, so diminishing the knock at this point, which, however, would always be a serious cause of trouble. The exhaust steam passes down to a jet condenser, provided with a supply of water from a containing tank, from which the injection is admitted through a regulating valve. The air pump, which draws the air and water from the condenser and discharges them through a pipe passing out at the end of the tank, is a rotary machine constructed like the engine and driven by spur gearing from the fly-wheel shaft. Some efforts have been made to prevent leakage by forming grooves in the sides of the revolving piston and filling them with soft packing."

Sundry other rotary engines, some of them actual working models, are to be seen at the South Kensington Museum. There is, for example, one invented by the Rev. Patrick Bell, a gentleman otherwise known to fame as one of the earliest inventors of a practical reaping machine. In this apparatus, "A metal disc is secured to a horizontal axis carried in bearings, and the lower half of the disc is enclosed by a chamber of circular section having its axis a semi-circle. One end of this chamber is closed and provided with a pipe through which steam enters, the exhaust taking place through the open end. The disc is provided with three holes, each fitted with a circular plate turning on an axis radial to the disc, and these plates when set at right angles to the disc become pistons in the lower enclosing chamber. Toothed gearing is arranged to rotate these pistons into the plane of the disc on leaving the cylinder and back again immediately after entering, locking levers retaining them in position during the intervals. The steam pressure upon these pistons forces the disc round, but the engine is non-expansive, and although some provision for packing has been made, the leakage must have been considerable and the wear and tear excessive."

It is stated that almost the same arrangement was proposed by Lord Armstrong in 1838 as a water motor, and that a model subsequently constructed gave over five horse-power at thirty revolutions per minute, with an efficiency of ninety-five per cent.

Another working model of a rotary engine shown at the Museum is one loaned by Messrs. Fielding and Platt in 1888. "The action of this engine depends upon the oscillating motion which the cross of a universal joint has relative to the containing jaws when the system is rotated.