"There is an obvious advantage in economy of space as compared with the reciprocating engine. The largest steam turbine constructed in the United States is one of 3,000 horse-power, which is installed in the power house of the Hartford Electric Light Company, Hartford, Conn. The total weight of this motor is 28,000 pounds, its length over all is 19 feet 8 inches, and its greatest diameter six feet. With the generator to which it is directly connected, it occupies a floor space of 33 feet 3 inches long by 8 feet 9 inches wide.
"Friction is reduced to a minimum in the steam turbine, owing to the absence of sliding parts and the small number of bearings. The absence of internal lubrication is also an important consideration, especially when it is desired to use condensers.
"As there are no reciprocating parts in a steam turbine, and as a perfect balance of its rotating parts is absolutely essential to its successful operation, vibration is reduced to such a small element that the simplest foundations will suffice, and it is safe to locate steam turbines on upper floors of a factory if this be desirable or necessary.
"The perfect balance of the moving parts and the extreme simplicity of construction tend to minimize the wear and increase the life of a turbine, and at the same time to reduce the chance of interruption in its operation through derangement of, or damage to, any of its essential parts.
"Although hardly beyond the stage of its first advent in the motive-power field, the steam turbine has met with much favor, and there is promise of its wide use for the purposes to which it is particularly adapted. At present, however, its uses are restricted to service that is continuous and regular, its particular adaptability being for the driving of electrical generators, pumps, ventilating fans, and similar work, especially where starting under load is not essential.
"Steam turbines are now being built in the United States in all sizes up to 3,000 horse-power. Their use abroad covers a longer period and has become more general. The largest turbines thus far attempted are those of the Metropolitan District Electric Traction Company, of London, embracing four units of 10,000 horse-power each. Several turbines of large size have been operated successfully in Germany."
It should be added that the compound turbine wheel of Parsons is not the only turbine wheel that has proved commercially valuable. There is a turbine consisting of a single ring of revolving blades, the invention of Dr. Gustav De Laval, which has proved itself capable of competing with the old type of engine. To make this form of single turbine operate satisfactorily, it is necessary to have steam under high pressure, and to generate a very high speed of revolution. In practice, the De Laval machines sometimes attain a speed of thirty thousand revolutions per minute. This is a much higher rate of speed than can advantageously be utilized directly in ordinary machinery, and consequently the shaft of this machine is geared to another shaft in such a way as to cause the second shaft to revolve much more slowly.