(3) Remove grip and spiral assembly from handle bars. Control wire and working parts are now accessible.
(4) Remove plain roller from pin. Remove roller block from pin. Remove pin from plunger.
(5) Pull plunger with wire attached out of handle bar end. Remove hexagon head screw which secures wire to plunger. NOTE: If wire is broken, remove other half from housing at carburetor connection end.
(6) Remove any rust, dirt, or gum from grip spiral, handle bar end, wire plunger, and inside of handle bar where plunger operates.
A—END NUT.
B—GRIP.
C—GRIP SLEEVE ASSEMBLY.
D—ROLLER PIN.